Aigostar Wireless Doorbell Self-Powered (Model B08TGP227L) Instruction Manual

1. Produk Lebihview

The Aigostar Wireless Doorbell system provides a convenient and reliable solution for home entry alerts. It features a self-powered transmitter and a battery-operated receiver, offering a long operating range and multiple customization options.

Gambar 1: Selesaiview of the Aigostar Wireless Doorbell system, showing the transmitter and receiver units.

Fitur Utama:

• Pemancar Mandiri: No batteries required for the push button, ensuring a long lifespan.
• Desain tahan air: IP44 rated for dust and water resistance, suitable for outdoor use in various weather conditions (-4°F to 140°F).
• Jangkauan Operasi yang Diperluas: Up to 1000ft (300m) in open areas, or 328ft (100m) indoors, allowing coverage throughout your property.
• Lonceng yang Dapat Disesuaikan: 32 selectable melodies, including traditional 'Ding Dong'.
• Volume yang Dapat Disesuaikan: 4 volume levels with a maximum of 110 dB.
• Peringatan Lampu Kilat LED: Visual indication on the receiver for enhanced notification.
• Fungsi Memori: Retains selected chime and volume settings after power loss.

2. Isi Paket

Sebelum pemasangan, harap pastikan bahwa semua komponen ada di dalam paket:

• Self-Powered Transmitter(s)
• Battery-Operated Receiver(s)
• Sekrup dan Jangkar Pemasangan
• Pita Perekat Dua Sisi
• Panduan Pengguna

Image 2: Contents of the Aigostar Wireless Doorbell package, including transmitters, receivers, and mounting hardware.

3. Pengaturan dan Instalasi

The Aigostar Wireless Doorbell system is designed for easy installation. The transmitter and receiver units are pre-paired at the factory.

3.1 Pengaturan Penerima

1. Insert 3 AAA batteries (not included) into the battery compartment of the receiver.
2. Place the receiver in a central location within your home, ensuring it is within the operating range of the transmitter.

3.2 Instalasi Pemancar

The transmitter can be installed using either adhesive tape or screws.

Method A: Adhesive Tape

1. Bersihkan permukaan tempat pemasangan yang diinginkan secara menyeluruh untuk memastikan permukaan tersebut kering dan bebas dari debu atau minyak.
2. Peel off one side of the double-sided adhesive tape and apply it to the back of the transmitter.
3. Peel off the other side of the tape and firmly press the transmitter onto the cleaned surface. Hold for 30 seconds to ensure good adhesion.

Image 3: Step-by-step guide for mounting the transmitter using double-sided adhesive tape.

Method B: Screws

1. Gunakan obeng untuk mencongkel penutup belakang pemancar secara perlahan.
2. Tandai lokasi pemasangan yang diinginkan pada dinding.
3. Drill two holes at the marked positions. Insert the expansion bolts into the holes.
4. Align the back cover with the drilled holes and secure it with screws.
5. Attach the main body of the transmitter onto the secured back cover.

Image 4: Detailed instructions for mounting the transmitter using screws and anchors.

Image 5: A visual comparison of the two installation methods: adhesive tape and screws.

4. Petunjuk Pengoperasian

4.1 Mengubah Melodi

To change the melody, press the 'Music' button on the side of the receiver. Each press will cycle through the 32 available chimes. Stop pressing when you hear your desired melody.

Image 6: The receiver unit, highlighting the buttons for melody selection and volume adjustment.

4.2 Menyesuaikan Volume

To adjust the volume, press the 'Volume' button on the side of the receiver. There are 4 volume levels, ranging from 0 dB (mute) to 110 dB. Cycle through the levels until you reach your preferred volume.

Image 7: Visual representation of the 4 adjustable volume levels on the receiver.

4.3 LED Flash Alert

The receiver features an LED light that flashes when the doorbell is pressed, providing a visual alert in addition to the audio chime. This is particularly useful in noisy environments or for individuals with hearing impairments.

5. Pemeliharaan dan Perawatan

• Pembersihan: Bersihkan unit bel pintu dengan kain lembut dan kering. Jangan gunakan pembersih abrasif atau pelarut.
• Penggantian Baterai (Penerima): When the receiver's sound becomes weak or inconsistent, replace the 3 AAA batteries.
• Pemancar: The transmitter is self-powered and does not require battery replacement.
• Peringkat Tahan Air: The transmitter is IP44 waterproof. While designed for outdoor use, avoid submerging it in water.

Image 8: The IP44 waterproof transmitter shown enduring snow and sun, indicating its suitability for diverse weather conditions.

6. Penyelesaian masalah

If you encounter issues with your Aigostar Wireless Doorbell, refer to the following common solutions:

• Tidak ada suara dari penerima:
  • Check if the receiver batteries are correctly inserted and not depleted.
  • Ensure the volume is not set to 0 dB (mute).
  • Verify the transmitter and receiver are within operating range and not obstructed by thick walls or metal objects.
• Bel pintu tidak berdering:
  • Confirm the transmitter button is being pressed firmly.
  • Periksa apakah ada kerusakan fisik pada pemancar.
  • If the units were moved, they might need to be re-paired (refer to manufacturer's website for specific re-pairing instructions if needed, as this model is typically pre-paired).
• Jangkauan Operasi Pendek:
  • Relocate the receiver to a more central position.
  • Avoid placing units near large metal structures, heavy concrete walls, or other electronic devices that may cause interference.

7. Spesifikasi

8. Garansi dan Dukungan

Aigostar products are designed for reliability and performance. For warranty information, technical support, or customer service inquiries, please refer to the contact details provided with your purchase or visit the official Aigostar weblokasi.

You can visit the Aigostar Store for more information: Toko Aigostar di Amazon