MOUNTUP MU0034 Manual Instruksi Pemasangan Meja Monitor Tunggal

1. Pendahuluan

This manual provides detailed instructions for the installation, operation, and maintenance of your MOUNTUP MU0034 Single Monitor Desk Mount. Please read this manual thoroughly before installation to ensure correct setup and safe operation. This monitor mount is designed to enhance your workspace ergonomics by providing adjustable positioning for a single monitor.

2. Informasi Keselamatan

• Pastikan semua komponen ada dan tidak rusak sebelum pemasangan. Jangan gunakan jika ada bagian yang hilang atau rusak.
• This product is intended for monitors weighing up to 17.6 lbs (8 kg) and screen sizes from 17 to 32 inches. Do not exceed the maximum weight capacity.
• Compatible VESA patterns are 75x75mm and 100x100mm. Verify your monitor's VESA pattern before proceeding.
• Ensure the desk surface is stable and strong enough to support the combined weight of the mount and monitor.
• Tighten all screws firmly, but do not overtighten to avoid stripping threads or damaging components.
• Jauhkan anak-anak dan hewan peliharaan selama pemasangan.
• Jika Anda ragu tentang proses instalasi, konsultasikan dengan profesional yang berkualifikasi.

3. Isi Paket

Mohon pastikan bahwa semua komponen sudah termasuk dalam paket Anda:

• Rakitan Lengan Monitor
• Meja Clamp Basis
• Komponen Dasar Grommet
• Plat VESA
• Perlengkapan (sekrup, ring, kunci Allen)
• Manual Instruksi

4. Spesifikasi

5. Pengaturan dan Instalasi

The MOUNTUP MU0034 offers two installation options: C-clamp mounting and Grommet mounting. Choose the method suitable for your desk.

5.1. C dan Clamp Pemasangan

This method is for desks without existing grommet holes, or if you prefer clamping to the edge of your desk. Ensure your desk thickness is no more than 3.35 inches.

1. Lampirkan C-clamp: Assemble the C-clamp components to the base of the monitor arm. Position the base on the edge of your desk and tighten the clamp screw until it is secure.
2. Pasang Pelat VESA ke Monitor: Secure the VESA plate to the back of your monitor using the appropriate screws from the hardware kit. Ensure the screws are tightened securely.
3. Slide Monitor onto Arm: Carefully slide the monitor (with the attached VESA plate) onto the monitor arm's VESA head. Ensure it clicks into place or is secured with the provided locking mechanism.
4. Sesuaikan Ketegangan: Refer to Section 6.1 for adjusting the gas spring tension to match your monitor's weight.

Figure 1: Illustration of C-clamp and Grommet mounting options. The C-clamp is shown securing the mount to the desk edge, while the grommet mount uses a desk hole.

Figure 2: The removable VESA plate being attached to the back of a monitor, then sliding onto the monitor arm for easier installation.

5.2. Pemasangan Grommet

This method utilizes an existing hole in your desk. Ensure your desk thickness is no more than 3.35 inches and the grommet hole diameter is between 0.39 and 3.1 inches.

1. Assemble Grommet Base: Insert the grommet base components through the desk hole and secure them from underneath the desk using the provided plate and nut.
2. Pasang Pelat VESA ke Monitor: Secure the VESA plate to the back of your monitor using the appropriate screws from the hardware kit. Ensure the screws are tightened securely.
3. Slide Monitor onto Arm: Carefully slide the monitor (with the attached VESA plate) onto the monitor arm's VESA head. Ensure it clicks into place or is secured with the provided locking mechanism.
4. Sesuaikan Ketegangan: Refer to Section 6.1 for adjusting the gas spring tension to match your monitor's weight.

6. Operasi dan Penyesuaian

The MOUNTUP MU0034 monitor arm offers various adjustments for optimal viewkenyamanan.

6.1. Penyetelan Ketegangan Pegas Gas

The gas spring tension needs to be adjusted to match the weight of your monitor. This ensures the monitor stays in position once adjusted.

• If the monitor drifts down, turn the adjustment screw (usually located on the arm joint) clockwise ("+") to increase tension.
• If the monitor floats up, turn the adjustment screw counter-clockwise ("-") to decrease tension.
• Adjust gradually until the monitor remains stable at any height.

Figure 3: Instructions for adjusting the gas spring tension using an Allen key. Turning clockwise increases tension, counter-clockwise decreases it.

6.2. Penyesuaian Ketinggian

Once the gas spring tension is correctly set, you can easily raise or lower your monitor to your desired ergonomic height. The arm allows for up to 11 inches of vertical adjustment.

Figure 4: Diagram illustrating the maximum height adjustment of 11 inches and maximum extension of 17.5 inches.

6.3. Kemiringan, Putaran, dan Rotasi

The monitor arm provides full motion capabilities:

• Memiringkan: Adjust the monitor screen +45° to -45° to reduce glare or find a comfortable viewsudut.
• Memutar: The arm can swivel 360° at the base and 360° at the middle joint. The monitor plate itself can swivel 180°. This allows for easy screen sharing or repositioning.
• Rotasi: Putar monitor 360° untuk beralih antara orientasi lanskap dan potret.

Figure 5: Visual representation of the monitor arm's full motion capabilities, including 360° swivel, 180° swivel at the monitor plate, and +45° to -45° tilt.

Figure 6: An image demonstrating the monitor's ability to rotate 360 degrees, allowing for both landscape and portrait viewmode.

7. Manajemen Kabel

The MOUNTUP MU0034 features integrated cable management to keep your workspace tidy.

1. Arahkan kabel monitor Anda (daya, video, dll.) di sepanjang bagian bawah lengan penyangga.
2. Use the provided cable clips or covers to secure the cables within the arm channels.
3. Pastikan kabel memiliki kelonggaran yang cukup untuk memungkinkan rentang gerak penuh tanpa tegangan.

Figure 7: Illustration of how cables are routed and organized through the integrated channels on the monitor arm, keeping the desk clear.

8. Pemeliharaan

• Periksa semua sekrup dan sambungan secara berkala untuk memastikan semuanya tetap kencang.
• Bersihkan dudukan dengan kain lembut,amp kain. Hindari pembersih atau pelarut abrasif.
• Jangan melumasi mekanisme pegas gas.

9. Penyelesaian masalah

10. Garansi dan Dukungan

The MOUNTUP MU0034 Single Monitor Desk Mount is backed by a 3-year support period. For technical assistance, missing parts, or warranty claims, please contact MOUNTUP customer support through their official channels or the retailer where the product was purchased.

Harap simpan bukti pembelian Anda untuk tujuan garansi.