Perkenalan
Thank you for choosing the Lepro 5m RGB LED Strip Light. This product is designed to provide versatile and vibrant lighting for various indoor applications. Featuring high-brightness SMD5050 LEDs, a wide range of colors, and easy installation, it enhances the ambiance of any space. Please read this manual carefully before installation and use to ensure proper operation and safety.
Apa yang ada di dalam kotak
Verifikasi bahwa semua komponen tersedia sebelum memulai instalasi:
- LED Strip Light (5 meters) x 1
- Adaptor Daya DC12V x 1
- Connection Receiver x 1
- Kontrol Jarak Jauh x 1
- Instruction Manual (Japanese) x 1
Informasi Keselamatan
- Produk ini dirancang untuk hanya untuk penggunaan di dalam ruanganJangan terkena air atau kelembapan tinggi.
- Pastikan catu daya terputus sebelum pemasangan atau pemeliharaan.
- Use only the provided DC12V power adapter. Using an incompatible power supply may damage the product or pose a fire hazard.
- Jangan menekuk strip LED secara tajam atau menggunakan tekanan berlebihan, karena hal ini dapat merusak sirkuit.
- Jauhkan dari jangkauan anak-anak.
- If any part of the product is damaged, discontinue use immediately and contact support.
Pengaturan
Ikuti langkah-langkah berikut untuk pemasangan lampu strip LED yang benar:
- Siapkan Permukaan: Clean the desired installation surface thoroughly. Ensure it is dry, smooth, and free of dust or oil for optimal adhesive performance.
- Ukur dan Potong (Opsional): If a shorter length is required, cut the LED strip along the designated cut marks (indicated by a scissor icon) using scissors. Catatan: Only cut at these specific marks. Cutting elsewhere will damage the strip. Cut sections cannot be reconnected without additional connectors (sold separately).
- Tempelkan Strip: Peel off the backing from the 3M adhesive tape on the back of the LED strip. Carefully press the strip onto the cleaned surface, ensuring firm contact along its entire length.
- Hubungkan Komponen: Connect the LED strip to the connection receiver, ensuring the arrows on both components align. Then, connect the DC12V power adapter to the receiver.
- Nyalakan: Plug the power adapter into a suitable power outlet. Remove the insulation sheet from the remote control before first use. Point the remote control towards the receiver and press the power button to turn on the lights.
Petunjuk Pengoperasian
The LED strip light is controlled using the included 44-key remote control. Ensure the remote is pointed towards the receiver for effective operation.
Fungsi Kontrol Jarak Jauh:
- Daya Hidup/Mati: Tekan tombol tombol daya merah untuk menyalakan atau mematikan lampu.
- Penyesuaian Kecerahan: Gunakan tombol panah atas dan bawah (labeled 'Brightness Adjust') to increase or decrease the light intensity.
- Pemilihan Warna: Pilih dari 20 warna prasetel by pressing the corresponding color buttons.
- Mode swakriya: Itu Tombol DIY1-DIY6 allow you to create and save custom colors by adjusting the Red, Green, and Blue intensity using the RGB arrow buttons.
- Mode Dinamis:
- CEPAT/LAMBAT: Sesuaikan kecepatan mode dinamis.
- MOBIL: Beralih melalui semua mode dinamis secara otomatis.
- KILATAN: Kilatan warna-warni.
- LOMPAT3/JUMP7: Jumps between 3 or 7 colors.
- FADE3/FADE7: Warnanya memudar antara 3 atau 7 warna.
Pemeliharaan
- Pembersihan: Ensure the power is off and unplugged before cleaning. Gently wipe the LED strip with a dry, soft cloth. Do not use harsh chemicals or abrasive cleaners.
- Penyimpanan: If storing the strip for an extended period, ensure it is clean and dry. Roll it loosely to prevent damage to the LEDs or circuit. Store in a cool, dry place away from direct sunlight.
- Perawatan Perekat: The 3M adhesive is strong, but repeated removal and reapplication may reduce its effectiveness.
Penyelesaian Masalah
| Masalah | Kemungkinan Penyebab | Larutan |
|---|---|---|
| Lampu LED strip tidak menyala. | 1. Power adapter not plugged in. 2. Remote control insulation sheet not removed. 3. Connections are loose or incorrect. 4. Remote control battery is dead. | 1. Ensure power adapter is securely plugged into an outlet. 2. Remove the clear plastic insulation sheet from the remote control battery compartment. 3. Check all connections, ensuring arrows align between the strip and receiver. 4. Replace the remote control battery (CR2025 or equivalent). |
| Kontrol jarak jauh tidak merespons. | 1. Remote not pointed at receiver. 2. Obstruction between remote and receiver. 3. Remote control battery is dead. | 1. Point the remote directly at the receiver. 2. Remove any objects blocking the line of sight. 3. Pasang kembali baterai kendali jarak jauh. |
| Some sections of the strip are not lighting up. | 1. Damage to the LED strip. 2. Incorrect cutting. | 1. Inspect the strip for physical damage. If damaged, contact support. 2. Ensure cuts were made only at designated marks. |
Spesifikasi
- Nomor Model: PR410082-RGB-JP
- Merek: penderita kusta
- Jenis Sumber Cahaya: LED (SMD5050)
- Jumlah LED: 150 LEDs (30 LEDs per meter)
- Panjang Strip: 5 meter
- Konsumsi Daya: 18W
- Masukan Voltage: Arus Listrik 12V 1.5A
- Pilihan Warna: RGB (20 preset colors + DIY modes)
- Metode Kontrol: 44-key IR Remote Control
- Penggunaan Dalam/Luar Ruangan: Dalam
- Fitur Khusus: Dimmable, Cuttable, 3M Adhesive, PSE Certified
- Ukuran Paket: 13.1 x 10.7 x 6.7 cm; 230 g
Garansi dan Dukungan
This Lepro LED Strip Light comes with a Garansi 2 tahun. If you encounter any issues or have questions regarding the product, please contact Lepro JP customer support through the retailer's platform. Provide your order details and a description of the issue for prompt assistance.
For further assistance, you can visit the official Lepro store on Amazon: Toko Amazon Lepro
