1. Pendahuluan
Thank you for choosing the FERM HDM1014 16mm 1100W Hammer Drill. This powerful corded tool is designed for efficient drilling and hammer drilling in various materials. To ensure safe and optimal performance, please read this instruction manual thoroughly before operating the tool. Keep this manual in a safe place for future reference.
2. Petunjuk Keselamatan
Always follow basic safety precautions when using electric tools to reduce the risk of fire, electric shock, and personal injury. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious injury.
- Keselamatan Area Kerja: Jaga area kerja Anda tetap bersih dan terang. Area yang berantakan atau gelap dapat menyebabkan kecelakaan. Jangan mengoperasikan perkakas listrik di lingkungan yang mudah meledak, seperti di dekat cairan, gas, atau debu yang mudah terbakar.
- Keamanan Listrik: Steker alat listrik harus sesuai dengan stopkontak. Jangan pernah memodifikasi steker dengan cara apa pun. Jangan gunakan steker adaptor apa pun dengan alat listrik yang diarde (dibumikan). Hindari kontak tubuh dengan permukaan yang dibumikan atau dibumikan seperti pipa, radiator, kompor, dan lemari es.
- Keamanan Pribadi: Always wear eye protection. Use safety glasses, goggles, or a face shield. Wear hearing protection when operating noisy tools. Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing, and gloves away from moving parts.
- Penggunaan dan Perawatan Alat: Jangan memaksakan perkakas listrik. Gunakan perkakas listrik yang sesuai dengan kebutuhan Anda. Cabut steker dari sumber listrik sebelum melakukan penyesuaian, mengganti aksesori, atau menyimpan perkakas listrik.
- Melayani: Servis perkakas listrik Anda oleh teknisi ahli dengan hanya menggunakan suku cadang pengganti yang sama. Ini akan memastikan keamanan perkakas listrik tetap terjaga.
3. Isi Paket
Carefully unpack the hammer drill and check if all items are present and undamaged. If any parts are missing or damaged, please contact your supplier immediately.
- Bor Palu FERM HDM1014
- Drill bits (various sizes)
- Kunci chuck
- Pegangan samping
- Penghenti kedalaman
- Panduan Pengguna
4. Fitur Produk
The FERM HDM1014 hammer drill is equipped with features designed for performance and user convenience:
- Motor Kuat 1100W: Menyediakan ample power for demanding drilling tasks.
- Chuck tanpa kunci 16mm: Allows for quick and easy bit changes without the need for a separate chuck key.
- Fungsi Palu: Engages for efficient drilling in masonry and concrete.
- Fungsi Terbalik: Useful for removing stuck drill bits and driving/removing screws.
- Desain Ergonomis: Ensures comfortable handling during prolonged use.
Image: The FERM HDM1014 Hammer Drill, showcasing its robust design, side handle for improved control, and the keyless chuck mechanism. The drill is depicted in its multi-color finish.
5. Pengaturan
5.1 Attaching the Side Handle and Depth Stop
- Kendurkan pegangan samping dengan memutarnya berlawanan arah jarum jam.
- Slide the side handle onto the front of the drill housing.
- Insert the depth stop into the hole on the side handle. Adjust the depth stop to the desired drilling depth.
- Tighten the side handle by rotating it clockwise to secure both the handle and the depth stop.
5.2 Memasang/Melepas Mata Bor
- Pastikan bor dicabut dari sumber listrik.
- Putar kerah penjepit berlawanan arah jarum jam untuk membuka rahang penjepit.
- Masukkan mata bor sepenuhnya ke dalam rahang chuck.
- Rotate the chuck collar clockwise to tighten the jaws securely around the drill bit. Ensure the bit is centered and firmly held.
- Untuk melepasnya, putar kerah chuck berlawanan arah jarum jam dan tarik mata bor keluar.
6. Petunjuk Pengoperasian
6.1 Sambungan Daya
Connect the drill's power cord to a suitable electrical outlet (refer to specifications for voltage requirements). Ensure the power switch is in the 'OFF' position before plugging in.
6.2 Memilih Mode Pengeboran
The FERM HDM1014 features a mode selector switch, typically located on the side of the drill housing. Select the appropriate mode for your task:
- Drilling Mode (Drill Icon): For drilling in wood, metal, plastic, and other non-masonry materials.
- Hammer Drilling Mode (Hammer Icon): For drilling in masonry, concrete, and stone. This mode combines rotation with an impact action.
6.3 Memulai dan Menghentikan Pengeboran
- Untuk menghidupkan bor, tekan sakelar pemicu.
- Untuk menghentikan bor, lepaskan sakelar pemicu.
- Untuk pengoperasian terus menerus, tekan pelatuk lalu tekan tombol pengunci (jika tersedia). Untuk melepaskan, tekan pelatuk lagi.
6.4 Using the Reverse Function
The reverse switch is typically located near the trigger. Push it to the left or right to change the direction of rotation. Use the reverse function to remove stuck drill bits or for driving/removing screws (if using appropriate screwdriver bits).
6.5 Tips Pengeboran
- Always secure your workpiece firmly before drilling.
- Berikan tekanan yang stabil dan merata. Jangan memaksakan bor.
- Untuk lubang yang dalam, tarik mata bor secara berkala untuk membersihkan serpihan.
- When drilling metal, use a cutting lubricant to prolong bit life and improve cutting efficiency.
7. Pemeliharaan
Regular maintenance ensures the longevity and safe operation of your FERM HDM1014 hammer drill.
- Pembersihan: After each use, clean the tool housing with a soft cloth. Do not use harsh chemicals or abrasive cleaners. Keep ventilation openings clear of dust and debris.
- Sikat Karbon: Sikat karbon mungkin perlu diganti setelah penggunaan yang lama. Penggantian ini harus dilakukan oleh teknisi servis yang berkualifikasi.
- Inspeksi Kabel: Regularly inspect the power cord for any signs of damage. If damaged, have it replaced by a qualified professional.
- Penyimpanan: Simpan bor di tempat yang kering dan aman, jauh dari jangkauan anak-anak.
8. Penyelesaian masalah
If you encounter issues with your FERM HDM1014, refer to the following common problems and solutions:
| Masalah | Kemungkinan Penyebab | Larutan |
|---|---|---|
| Bor tidak dimulai | Tidak ada catu daya; Kabel/colokan rusak; Sakelar rusak | Check power outlet and connections; Inspect cord/plug for damage; Contact service center if switch is faulty. |
| Drill bit not rotating or slipping | Chuck not tightened properly; Worn drill bit | Tighten chuck securely; Replace worn drill bit. |
| Getaran atau kebisingan yang berlebihan | Komponen longgar; Bagian internal rusak | Check for loose screws; Discontinue use and contact service center. |
If the problem persists after attempting these solutions, please contact FERM customer support or an authorized service center.
9. Spesifikasi
Technical specifications for the FERM HDM1014 Hammer Drill:
| Fitur | Nilai |
|---|---|
| Merek | PERTANIAN |
| Nomor Model | HDMI1014 |
| Sumber Daya | Listrik Kabel |
| Daya Maksimum | 1100W |
| Jil.tage | 4 V (Catatan: Tegangan initage seems unusually low for an 1100W tool. Please verify with product labeling.) |
| Jenis Chuck | Tanpa kunci |
| Ukuran Chuck Maksimum | 16 mm |
| Kecepatan (Tanpa beban) | 750 putaran/menit |
| Fungsi Palu | Ya |
| Fungsi Terbalik | Ya |
| Kecepatan yang Dapat Disesuaikan | TIDAK |
| Berat Barang | 9.73 kg |
| Dimensi Paket | Ukuran 45.6x37.2x13.8 cm |
| Komponen yang Termasuk | Drill bits, Chuck key |
| Baterai Diperlukan | TIDAK |
10. Garansi dan Dukungan
FERM products are manufactured to high-quality standards and are guaranteed against defects in materials and workmanship for a period specified by your local retailer or distributor. Please retain your purchase receipt as proof of purchase.
For warranty claims, technical support, or spare parts, please contact your original point of purchase or visit the official FERM webSitus ini berisi informasi kontak dan lokasi pusat layanan.
Always refer to the specific warranty terms and conditions provided with your product at the time of purchase.
