iTouch Wearables Smartwatch Replacement USB Charger Cable

Produk Selesaiview

This document provides essential information for the iTouch Wearables Air 3 and iTouch Sport 3 Smartwatch Replacement USB Charger Cable. It covers compatibility, features, setup, operation, maintenance, and troubleshooting to ensure optimal use of your charging cable.

Figure 1: iTouch Smartwatch Replacement USB Charger Cable. This image displays the full length of the black USB charging cable, featuring a circular magnetic charging puck on one end and a standard USB-A connector on the other.

Kesesuaian

This replacement USB charger cable is specifically designed for use with the following iTouch Smartwatch models:

• iTouch Air 3 Smartwatch
• Jam Tangan Pintar iTouch Sport 3
• iTouch Air 4 Smartwatch
• Jam Tangan Pintar iTouch Sport 4

Ensure your smartwatch model is listed above for proper functionality.

Fitur

• Easy Magnetic Connection: The charger features a magnetic design that automatically aligns and connects to the back of your compatible smartwatch for hassle-free charging.
• Panjang Optimal: With a length of 5 feet (approximately 1.5 meters), this cable provides convenient reach for various charging setups.
• Pengisian Daya yang Efisien: Designed to provide fast charging, allowing a full charge in approximately 2.5 to 3.5 hours.
• Desain Portabel: Its light and compact form factor makes it ideal for travel or as a spare charger.
• Konstruksi Tahan Lama: Built for reliability and long-term use.

Pengaturan dan Pengoperasian

Menghubungkan Pengisi Daya

1. Locate a standard USB-A power source, such as a wall adapter (not included), computer USB port, or power bank.
2. Insert the USB-A end of the charging cable into the USB power source.
3. Place the circular magnetic charging puck close to the charging contacts on the back of your iTouch smartwatch. The magnet will automatically snap the charger into the correct position.
4. Ensure the smartwatch screen indicates that charging has begun.

Gambar 2: Tampilan jarak dekat view of the iTouch Smartwatch Charger Cable. This image highlights the magnetic charging puck and the USB-A connector, showing the cable's design.

Proses Pengisian Daya

Once connected, your smartwatch will begin charging. A full charge typically takes between 2.5 to 3.5 hours. Charging time may vary based on the power source and the smartwatch's current battery level.

Pemeliharaan

To ensure the longevity and optimal performance of your charging cable, follow these maintenance guidelines:

• Keep the charging contacts on the magnetic puck clean and free of dust or debris. Use a soft, dry cloth to wipe them gently if needed.
• Avoid bending or kinking the cable excessively, especially near the connectors, as this can damage internal wires.
• Simpan kabel di tempat yang sejuk dan kering saat tidak digunakan.
• Jangan biarkan kabel terkena suhu ekstrem atau sinar matahari langsung dalam waktu lama.
• Jangan mencoba membongkar atau memodifikasi pengisi daya.

Penyelesaian Masalah

Spesifikasi

Figure 3: iTouch Smartwatch Charger Cable with key specifications highlighted. This image visually confirms the connector type, cable type, and color.

Garansi dan Dukungan

For information regarding product warranty, returns, or technical support, please refer to the official iTouch Wearables websitus web atau hubungi layanan pelanggan mereka secara langsung. Simpan struk pembelian Anda untuk klaim garansi.

Note: This manual provides general guidance. Specific warranty terms and support procedures may vary.