SINOTIMER TM618 -7 Days Programmable Weekly Timer Module

1. Lebihview

The SINOTIMER TM618 timer module is designed to automatically control the power supply to various electrical apparatus, such as streetlights, neon signs, billboards, and other appliances, based on a preset time schedule. This digital timer switch features a rechargeable internal battery to maintain program settings during power outagyaitu.

Gambar 1.1: Depan view of the TM618 Timer Module.

2. Fitur Utama

• Desain kompak dan hemat-ruang.
• Engineered with advanced digital timing technology.
• High functionality for precise time control.
• Built-in rechargeable battery for program retention.
• Multiple ON/OFF programs for weekly scheduling.

3. Pengaturan dan Instalasi

3.1. Diagram Pengkabelan

Proper wiring is crucial for the safe and correct operation of the TM618 timer module. Refer to the diagram below for connection details. Ensure power is disconnected before performing any wiring.

Figure 3.1: Wiring Terminals and Specifications.

• Input (200-250VAC): Connect your main power supply to terminals 1 and 2.
• Output (16 AMP / 250VAC, 20 AMP @30 VDC): Terminals 3, 4, and 5 are for the controlled output. Terminal 3 is common, Terminal 4 is normally open (NO), and Terminal 5 is normally closed (NC). Connect your load to the appropriate terminals based on your application (e.g., between 3 and 4 for normally off, turning on when timed).

3.2. Initial Power-Up and Battery

Upon initial power-up, the timer's internal rechargeable battery (40mAh) will begin charging. This battery saves your programmed settings during power interruptions. Allow the unit to be powered for at least 30 minutes for the battery to gain sufficient charge before programming or disconnecting power.

Figure 3.2: Internal 40mAh Rechargeable Battery.

Figure 3.3: TM618 Operating Voltage (220V AC shown).

4. Petunjuk Pengoperasian

The TM618 timer allows for precise control with up to 16 ON/OFF programs per day or week. The buttons on the front panel are used for setting the time and programs.

Figure 4.1: Timer Module with Manual.

4.1. Mengatur Waktu Saat Ini

1. Tekan tombol JAM button and hold it.
2. Saat memegang JAM, tekan PEKAN untuk mengatur hari saat ini dalam seminggu.
3. Saat memegang JAM, tekan JAM untuk mengatur jam saat ini.
4. Saat memegang JAM, tekan MENIT untuk mengatur menit saat ini.
5. Lepaskan JAM tombol. Waktu sekarang sudah diatur.

4.2. Pemrograman Waktu ON/OFF

Timer ini mendukung hingga 16 program ON/OFF. Setiap program terdiri dari waktu ON dan waktu OFF.

1. Tekan tombol PROG Tekan tombol sekali. Layar akan menampilkan "1 ON".
2. Tekan PEKAN to select the day(s) for this program (e.g., MO, TU, WE, TH, FR, SA, SU, or combinations like MO-FR, SA-SU, MO-SA, etc.).
3. Tekan JAM untuk mengatur jam ON yang diinginkan.
4. Tekan MENIT untuk mengatur menit ON yang diinginkan.
5. Tekan PROG lagi. Layar akan menampilkan "1 OFF".
6. Ulangi langkah 2-4 untuk mengatur hari, jam, dan menit MATI yang diinginkan untuk program ini.
7. Tekan PROG to advance to the next program ("2 ON") or to exit programming mode if no more programs are needed.
8. To clear a program, press MENGINGAT ketika viewing the specific ON or OFF program you wish to clear.

4.3. Penggantian Manual

Tekan tombol PANDUAN button to cycle through different operating modes:

• AKTIF OTOMATIS: The timer is currently ON and will follow the programmed schedule.
• MATI OTOMATIS: The timer is currently OFF and will follow the programmed schedule.
• DI: The timer is forced ON, overriding any programs.
• MATI: The timer is forced OFF, overriding any programs.

4.4. Recall Function

Itu MENGINGAT button (often marked 'R' or 'RESET') is used to clear specific program settings or to reset the timer. A small pinhole button (R) is typically used for a full reset, which clears all programs and resets the time.

5. Pemeliharaan

5.1. Perawatan Baterai

The TM618 features a built-in rechargeable battery. To ensure its longevity and proper function, keep the timer connected to power for regular charging. If the timer is stored for extended periods without power, the battery may discharge, requiring a full charge upon reconnection.

5.2. Pembersihan

Clean the exterior of the timer module with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the plastic casing or display. Ensure no liquids enter the device.

6. Penyelesaian masalah

• Tampilan kosong: Check power connections. Ensure the unit has been powered for at least 30 minutes to charge the internal battery.
• Programs not executing: Verify that the current time is set correctly. Check that the timer is in "AUTO ON" or "AUTO OFF" mode, not forced ON/OFF. Review Atur waktu ON/OFF yang telah Anda program untuk akurasi.
• Timer not responding to buttons: Perform a full reset using the small 'R' pinhole button. If issues persist, ensure proper power supply.

7. Spesifikasi

7.1. Dimensi

Figure 7.1: Front Dimensions.

Figure 7.2: Side Dimensions.

8. Garansi dan Dukungan

For information regarding product warranty, technical support, or service, please refer to the documentation provided with your purchase or contact your retailer. Keep your proof of purchase for any warranty claims.