Pro-Ject Debut III Phono SB BT Turntable User Manual

Perkenalan

Thank you for choosing the Pro-Ject Debut III Phono SB BT Turntable. This manual provides essential information for setting up, operating, and maintaining your new turntable to ensure optimal performance and longevity. Please read this manual thoroughly before using the product.

Petunjuk Keselamatan

• Always disconnect the turntable from the power supply before cleaning or performing any maintenance.
• Jangan biarkan meja putar terkena hujan atau kelembapan.
• Avoid placing the turntable in direct sunlight or near heat sources.
• Pastikan ventilasi yang baik di sekitar unit.
• Do not place heavy objects on the turntable.
• Use only the power supply provided with the unit.
• Jauhkan dari jangkauan anak-anak.

Apa yang ada di dalam kotak

Carefully unpack all items from the packaging. Please ensure all components listed below are present:

• Pro-Ject Debut III Phono SB BT Turntable Unit
• Penutup Debu
• Kabel Koneksi (RCA)
• Manual Instruksi
• Catu Daya

Pengaturan

Ikuti langkah-langkah berikut untuk menyiapkan meja putar Anda:

1. Penempatan: Place the turntable on a stable, level surface away from vibrations and direct sunlight.
2. Pemasangan Platter: Carefully place the main platter onto the spindle. Ensure it sits securely.
3. Pemasangan Sabuk: Locate the drive belt and carefully stretch it around the motor pulley and the sub-platter.
4. Tonearm Setup:
   

   Gambar: Detail view of the tonearm, showing the counterweight and anti-skate wire.

   The Ortofon OM5e cartridge is typically pre-mounted. Adjust the counterweight by rotating it until the tonearm floats horizontally. Then, set the tracking force according to the cartridge manufacturer's recommendation (typically 1.75g for OM5e). Attach the anti-skate weight to the anti-skate wire and loop it over the appropriate groove on the anti-skate stub.
5. Menghubungkan ke Sistem Audio:
   

   Gambar: Sisi profile of the turntable, highlighting its sturdy plinth and isolation feet.

   Connect the RCA output cables from the turntable to an available input on your amplifier or powered speakers. Since this model has a built-in phono preamp, you can connect it to a standard line-level input (e.g., AUX, CD, LINE). If your amplifier has a dedicated phono input, you may choose to bypass the internal preamp if desired (refer to the turntable's specific instructions for preamp bypass).
6. Koneksi Bluetooth: To connect wirelessly, ensure your Bluetooth speaker or receiver is in pairing mode. Press and hold the Bluetooth pairing button on the turntable (if available, refer to specific model instructions for location) until the indicator light flashes. Select 'Pro-Ject Turntable' or similar from your device's Bluetooth list.
7. Sambungan Daya: Connect the power supply to the turntable's power input and then plug it into a wall outlet.

Pengoperasian

Operating your turntable is straightforward:

1. Daya Hidup/Mati:
   

   Image: The power switch, typically located on the underside or side of the plinth.

   Use the power switch to turn the turntable on or off.
2. Pemilihan Kecepatan: The turntable supports 33, 45, and 78 RPM speeds. Use the electronic speed switch to select the appropriate speed for your record. For 78 RPM records, a special stylus (not included) is required.
3. Memainkan Rekaman:
   

   Gambar: Atas view of the turntable, showing the platter, record mat, and tonearm.

   Place a record on the platter. Carefully lift the tonearm using the cueing lever. Position the stylus over the desired groove on the record. Gently lower the cueing lever to allow the stylus to descend onto the record.
4. Menghentikan Pemutaran: At the end of a record, the tonearm will not automatically lift. Use the cueing lever to raise the tonearm and return it to its rest.

Pemeliharaan

Regular maintenance ensures the longevity and performance of your turntable:

• Membersihkan Meja Putar: Use a soft, dry, lint-free cloth to clean the plinth and dust cover. Avoid abrasive cleaners or solvents.
• Perawatan Stylus:
  

  Gambar: Detail view of the Ortofon OM5e cartridge and stylus, positioned over a record.

  Gently clean the stylus using a soft brush designed for stylus cleaning, brushing from back to front. Do not touch the stylus with your fingers. Replace the stylus periodically (e.g., every 500-1000 hours of playback) or if you notice a degradation in sound quality.
• Pembersihan Rekaman: Jagalah kebersihan piringan hitam Anda untuk mencegah penumpukan debu pada jarum stylus dan meningkatkan kualitas suara.

Penyelesaian Masalah

If you encounter issues with your turntable, refer to the following common problems and solutions:

If the problem persists, please contact Pro-Ject customer support.

Spesifikasi

Key specifications for the Pro-Ject Debut III Phono SB BT Turntable:

• Dimensi Produk: 16.34x12.6x4.53 inci
• Berat Barang: 13.2 pon (6 Kilogram)
• Lengan: 8.6 inch one-piece low-resonance aluminium tonearm
• Kartrid: Ortofon OM5e (pre-installed)
• Konektivitas: Auxiliary (RCA), Bluetooth
• Kecepatan Rotasi Maksimum: 78 RPM (mendukung 33, 45, 78 RPM)
• Fitur Khusus: Adjustable Speed, Built-in Phono Preamp
• Bahan Sasis: High-quality MDF chassis in high-gloss black
• Konsumsi Daya (Mode Aktif): 4 watt

Garansi dan Dukungan

This Pro-Ject turntable comes with a manufacturer's warranty. Please refer to the warranty card included in your packaging for specific terms and conditions. For technical support, service, or warranty claims, please contact Pro-Ject Audio Systems customer service through their official websitus atau informasi kontak yang diberikan bersama dokumentasi pembelian Anda.