Perkenalan
This manual provides detailed instructions for the installation, operation, and maintenance of your Herdio 6.5-inch Bluetooth Ceiling Speakers with In-Wall Amplifier. This system is designed to deliver high-fidelity audio for various indoor environments, including home theaters, bathrooms, living rooms, kitchens, and offices. Please read this manual thoroughly before installation and use to ensure optimal performance and safety.
Isi Paket
Verifikasi bahwa semua item yang tercantum di bawah ini disertakan dalam paket Anda:
- 1x Wall Mount Bluetooth Amppengangkat
- 1x Adaptor AC
- 2x Sekrup
- 2x 6.5-inch In-Ceiling Speakers
- 2x Speaker Wires
- 2x User Manuals (one for amplifier, one for speakers)
Pengaturan
This section guides you through the physical installation and wiring of your Herdio ceiling speaker system.
1. AmpInstalasi pengangkat
Di dalam dinding amplifier is designed for flush mounting in a standard wall plate size. Ensure you have appropriate wiring access before proceeding.
- Siapkan Tembok: Use the provided template (if applicable) to mark and cut an opening in the wall for the amppengangkat.
- Hubungkan Kabel Daya: Connect the 12V DC power cable to the designated two-pin connector on the back of the ampmodul pengangkat.
- Hubungkan Kabel Audio: Connect the audio cable to the three-pin connector on the back of the ampmodul pengangkat.
- Aman Amppengangkat: Masukkan amplifier module into the wall opening and secure it using the provided screws.
- Pasang Pelat Depan: Place the decorative faceplate over the installed amplifier and secure it.
2. Pemasangan Speaker
The ceiling speakers are designed for flush mounting. Ensure you have appropriate ceiling space and wiring access.
- Mark Cutout: Use the provided cutout template to mark the desired location for each speaker in the ceiling.
- Pembukaan Potongan: Carefully cut the circular opening in the ceiling according to the marked template. The cutout diameter is approximately 8.07 inches (20.5 cm).
- Lepaskan Kisi-kisi: Gently remove the magnetic grille from the front of each speaker.
- Hubungkan Kabel Speaker: Connect the speaker wires to the spring-loaded terminals on the back of each speaker. Ensure correct polarity: red wire to positive (+) terminal, black wire to negative (-) terminal.
- Masukkan Pembicara: Insert the speaker into the ceiling opening. The mounting clamps will automatically engage.
- Kencangkan Clamps: Use a screwdriver to tighten the screws on the front baffle of the speaker. This will rotate the mounting clamps and secure the speaker firmly in place.
- Replace Grille: Reattach the magnetic grille to the speaker.
3. Diagram Pengkabelan
Connect the speaker wires from the ceiling speakers to the amplifier terminals. Ensure correct polarity for both speakers (red to +, black to -).
4. Koneksi Daya
Connect the AC adapter to a standard 120V power outlet and then plug the DC end into the amplifier's power input. The power LED on the amplifier will illuminate.
Video: This video demonstrates the unboxing, wiring, Bluetooth pairing, and installation process for the Herdio 6.5-inch Bluetooth Ceiling Speakers Set.
Petunjuk Pengoperasian
Learn how to use your Herdio ceiling speaker system.
1. Daya Hidup/Mati dan Kontrol Volume
Turn the knob on the amplifier clockwise to power on the unit and increase the volume. Turn it counter-clockwise to decrease volume and power off. You will hear an audible drop sound when powering on.
2. Pemasangan Bluetooth
After powering on, the blue Bluetooth indicator light will flash, indicating it is in pairing mode. On your smart device (phone, tablet, etc.), search for available Bluetooth devices and select 'Herdio'. Once connected, the blue light will remain solid.
3. Pemilihan Masukan
Use the input selection switch on the amplifier to choose between Bluetooth (BT), Auxiliary (AUX), or Microphone (MIC) input modes.
4. Fungsionalitas USB
The USB port functions as a flash memory reader for media playback and also provides a charging port for your devices (5V/1A).
5. Masukan Mikrofon
Connect a microphone to the 1/4-inch MIC IN jack for paging or voice applications.
Pemeliharaan
To ensure the longevity and optimal performance of your Herdio ceiling speakers and amplifier, ikuti panduan perawatan berikut:
- Pembersihan: Gunakan kain lembut dan kering untuk membersihkan amplifier faceplate and speaker grilles. Avoid using harsh chemicals, solvents, or abrasive cleaners, as these can damage the finish.
- Penghilangan Debu: Periodically use a soft brush or a low-power vacuum with a brush attachment to gently remove dust from the speaker grilles.
- Kondisi Lingkungan: Ensure the speakers and amplifier are installed in environments free from excessive moisture, extreme temperatures, and direct sunlight. The product is not waterproof.
- Inspeksi Kabel: Periodically check all wiring connections to ensure they are secure and free from corrosion or damage.
Penyelesaian Masalah
If you encounter issues with your Herdio ceiling speaker system, refer to the following common problems and solutions:
- Tidak Ada Daya:
- Ensure the AC adapter is securely plugged into a working power outlet and the amplifier's DC input.
- Check if the power knob on the amplifier is turned clockwise to the 'ON' position.
- Verifikasi apakah stopkontak berfungsi dengan mencolokkan perangkat lain.
- Tidak Ada Suara dari Speaker:
- Confirm that the speaker wires are correctly connected to both the speakers and the amplifier, observing proper polarity (+ to +, - to -).
- Ensure the volume knob on the amplifier dihidupkan.
- Check the input selection switch on the amplifier to ensure the correct source (BT, AUX, MIC) is selected.
- Jika menggunakan Bluetooth, pastikan perangkat Anda sudah terhubung dan memutar audio.
- If using AUX or MIC, ensure the external device is connected and functioning correctly.
- Masalah Koneksi Bluetooth:
- Pastikan amplifier is in Bluetooth pairing mode (blue light flashing).
- Make sure your Bluetooth device is within the 30+ feet wireless range.
- Forget the 'Herdio' device from your smart device's Bluetooth settings and attempt to re-pair.
- Mulai ulang keduanya amplifier dan perangkat Bluetooth Anda.
- Suara Terdistorsi:
- Kecilkan volume pada keduanya amppenguat dan perangkat sumber audio Anda.
- Periksa sambungan kabel speaker untuk memastikan tidak ada kabel yang kendur atau korsleting.
- Ensure the audio source is not overdriven or producing distorted signals.
Spesifikasi
| Merek | Herdio |
| Nama Model | SKT 818 |
| Jenis Pembicara | Woofer, Tweeter |
| Ukuran Speaker | 6.5 inci |
| Daya Keluaran Maksimum Speaker | 320 Watt |
| Impedansi | 8 Ohm |
| Respon Frekuensi | 20 KHz (Note: This is likely the upper limit, typical range is broader) |
| Teknologi Konektivitas | Tambahan, Bluetooth, USB |
| Teknologi Komunikasi Nirkabel | Bahasa Indonesia: Bluetooth |
| Jangkauan Bluetooth | 30 Kaki |
| Masukan Voltage | 120 Volt |
| Sumber Daya | Listrik Kabel |
| Jenis Pemasangan | Pemasangan Rata, Pemasangan di Langit-langit |
| Dimensi Produk (Amppengangkat) | 9.25"D x 9.25"W x 4.13"H (Note: This dimension seems to be for the speaker, not the amppengangkat. Amplifier is typically smaller, as shown in images.) |
| Bahan | Akrilonitril Butadiena Stirena (ABS) |
| Tahan air | SALAH (Tidak Tahan Air) |
| Berat Barang | 9.08 pon (Berat total paket) |
Informasi Garansi
The Herdio 6.5-inch Bluetooth Ceiling Speakers with In-Wall Amplifier dilengkapi dengan Garansi Terbatas. For specific details regarding warranty coverage, duration, and claims process, please refer to the warranty card included in your package or contact Herdio customer support directly.
Mendukung
For further assistance, technical support, or inquiries regarding your Herdio product, please visit the official Herdio website or contact their customer service department. Contact information can typically be found on the product packaging or on the Herdio weblokasi.
