Buku Panduan Pengguna Turntable Direct Drive High Torque Reloop RP-7000 MK2

1. Pendahuluan

This manual provides essential information for the safe and efficient operation of your Reloop RP-7000 MK2 Direct Drive High Torque Turntable. Please read these instructions thoroughly before using the product to ensure proper setup, optimal performance, and longevity of your equipment. Keep this manual for future reference.

2. Petunjuk Keselamatan

• Catu Daya: Hubungkan unit hanya ke stopkontak AC dengan tegangan yang ditentukan.tage. Ensure the power cord is not damaged or pinched.
• Kelembaban: Do not expose the unit to rain, moisture, or excessive humidity. Avoid placing liquid-filled objects on the turntable.
• Ventilasi: Pastikan ventilasi memadai di sekitar unit. Jangan halangi lubang ventilasi.
• Penempatan: Place the turntable on a stable, level surface away from direct sunlight, heat sources, and strong magnetic fields.
• Pembersihan: Cabut aliran listrik sebelum membersihkan. Gunakan kain lembut dan kering. Hindari penggunaan cairan pembersih atau pelarut.
• Pelayanan: Jangan mencoba memperbaiki unit sendiri. Serahkan semua perbaikan kepada personel yang berkualifikasi.

3. Isi Paket

Pastikan semua barang yang tercantum di bawah ini termasuk dalam paket Anda. Jika ada barang yang hilang atau rusak, segera hubungi dealer Anda.

• Reloop RP-7000 MK2 Direct Drive High Torque Turntable (x2)
• Penutup Debu (x2)
• Digital Turntable Stylus Scale
• Record Care Solution
• Kabel listrik
• RCA Kabel
• Kabel tanah
• alas slip
• Pengimbang
• Headshell with Cartridge (pre-mounted or separate, depending on region/bundle)

Gambar 1: Lebihview of the Reloop RP-7000 MK2 turntable bundle components.

4. Pengaturan

4.1 Pembongkaran dan Penempatan

1. Carefully remove all components from the packaging. Retain packaging for future transport.
2. Place the turntable on a flat, stable, and vibration-free surface. Ensure there is enough space for the dust cover to open fully.
3. Attach the dust cover by aligning its hinges with the slots on the turntable's rear.

Gambar 2: Turntable with the dust cover in place.

4.2 Platter and Slipmat Installation

1. Letakkan piring saji dengan hati-hati di atas poros tengah. Pastikan piring saji terpasang rata.
2. Letakkan alas piringan di atas piring saji.

4.3 Pengaturan Lengan Tonearm dan Kartrid

1. If not pre-mounted, attach the headshell with the cartridge to the tonearm. Secure it by turning the locking ring.
2. Screw the counterweight onto the rear of the tonearm.
3. Menyeimbangkan Lengan Tonearm: Lepaskan klem tonearmamp. Adjust the counterweight until the tonearm is perfectly balanced and floats horizontally.
4. Atur Gaya Pelacak: Return the tonearm to its rest and clamp it. Rotate the numbered ring on the counterweight to '0' without moving the counterweight itself. Then, rotate the entire counterweight to the recommended tracking force for your cartridge (typically 2-4 grams for DJ cartridges).
5. Setel Anti-Skate: Sesuaikan tombol anti-skate agar sesuai dengan pengaturan gaya pelacakan.

4.4 Using the Digital Stylus Scale

The included digital stylus scale allows for precise measurement of your cartridge's tracking force, ensuring optimal sound quality and minimizing record wear.

1. Place the stylus scale on the platter.
2. Nyalakan timbangan menggunakan tombol daya.
3. Carefully lower the stylus onto the designated measuring point on the scale.
4. Read the tracking force displayed. Adjust the tonearm's counterweight as needed until the desired force is achieved.

Gambar 3: Digital Stylus Scale for precise tracking force measurement.

4.5 Koneksi

1. Keluaran Audio: Connect the RCA cables from the turntable's audio output to the PHONO input of your mixer or amplifier. If your mixer/amplifier does not have a PHONO input, you will need an external phono preamppengangkat.
2. Kabel tanah: Connect the ground wire from the turntable to the ground terminal on your mixer or amplifier to reduce hum.
3. Kekuatan: Connect the power cable to the turntable and then to a suitable AC power outlet.

5. Petunjuk Pengoperasian

5.1 Pemutaran Dasar

1. Place a record on the slipmat.
2. Select the appropriate speed (33, 45, or 78 RPM) using the speed selector buttons.
3. Tekan tombol MULAI/BERHENTI tombol untuk memulai rotasi piringan.
4. Angkat lengan pemutar piringan hitam dengan hati-hati menggunakan tuas pengatur posisi dan posisikan jarum pemutar di atas alur yang diinginkan pada piringan hitam.
5. Turunkan tuas penunjuk untuk menempatkan jarum stylus dengan lembut ke atas piringan hitam.
6. To stop playback, lift the tonearm using the cueing lever, return it to the tonearm rest, and press the MULAI/BERHENTI tombol.

Gambar 4: Turntable platter and control layout.

5.2 Kontrol Nada

The pitch fader allows you to adjust the playback speed (BPM) of the record. Move the fader up or down to increase or decrease the pitch. The pitch range can be selected using the range buttons (e.g., +/- 8%, 16%, 50%).

5.3 Fungsi Terbalik

The RP-7000 MK2 features a reverse playback function. Press the BALIK button to change the direction of platter rotation. Press it again to return to normal playback.

6. Pemeliharaan

6.1 Membersihkan Meja Putar

• Selalu putuskan sambungan listrik sebelum membersihkan.
• Use a soft, dry, lint-free cloth to wipe the surface of the turntable and dust cover.
• Hindari penggunaan pembersih abrasif, pelarut, atau semprotan kimia, karena dapat merusak lapisan akhir.

6.2 Perawatan Stylus

• Gently brush the stylus from back to front using a soft stylus brush to remove dust and debris.
• Hindari menyentuh stylus dengan jari Anda.

6.3 Perawatan Catatan

The included record care solution helps maintain the quality of your vinyl records and prolong their lifespan.

1. Apply a small amount of record care solution to a clean, soft, lint-free cloth or a dedicated record cleaning brush.
2. Gently wipe the record surface in a circular motion, following the grooves.
3. Allow the record to dry completely before playing.

Gambar 5: Record Care Solution for maintaining vinyl quality.

7. Penyelesaian masalah

8. Spesifikasi

9. Garansi dan Dukungan

Reloop products are designed for reliability and performance. For warranty information, please refer to the warranty card included with your product or visit the official Reloop website. For technical support or service inquiries, please contact your authorized Reloop dealer or distributor.

Pabrikan: Ulangi lagi

Tanggal Pertama Tersedia: 8 Juli 2022