Panduan Pengguna Casing PC Phanteks Eclipse P600S DRGB Silent E-ATX/ATX

1. Pendahuluan

The Phanteks Eclipse P600S is a versatile PC chassis designed to offer a balance between silent operation and high-performance airflow. This manual provides detailed instructions for the installation, operation, and maintenance of your Eclipse P600S PC case. Please read this manual thoroughly before beginning assembly to ensure proper setup and optimal performance.

Image 1.1: The Phanteks Eclipse P600S Matte White Edition PC Case, showcasing desainnya yang ramping.

2. Fitur Utama

• Desain Hibrid: Seamlessly switch between silent and high-performance modes by adjusting the front and top panels.
• Suara Dampening Panels: Equipped with effective soundproofing panels for reduced noise emissions in silent mode.
• High-Airflow Fabric Mesh: Utilizes Phanteks' high-airflow fabric for maximum cooling performance.
• Extensive Motherboard Support: Compatible with ATX, uATX, mITX, and E-ATX motherboards (up to 280mm wide).
• Integrated DRGB Lighting: Includes three 140mm DRGB fans with addressable RGB lighting, compatible with major motherboard sync technologies.
• Universal Fan Hub: Centralized control for fan performance and acoustics.
• Konektivitas Tingkat Lanjut: Features a front I/O panel with 1x USB 3.1 Type-C and 2x USB 3.0 ports.
• Watercooling Ready: Supports high-end watercooling solutions for both 120mm and 140mm radiator form factors.
• Dukungan Sistem Ganda: Allows for the installation of an ITX motherboard in the top section to run simultaneously with the main system.

Image 2.1: The Phanteks Eclipse P600S featuring three included 140mm D-RGB fans, compatible with various motherboard RGB sync technologies.

3. Isi Paket

Verifikasi bahwa semua komponen tersedia sebelum melanjutkan instalasi:

• Phanteks Eclipse P600S PC Chassis (Matte White, Tempered Glass)
• 3x Phanteks Premium 140mm DRGB Fans (pre-installed)
• Kotak Aksesori (berisi sekrup, pengikat kabel, dan bagian-bagian kecil lainnya)
• User Manual (dokumen ini)
• 4x 3.5" HDD brackets (pre-installed)
• 3x 2.5" SSD brackets (pre-installed)

4. Pengaturan dan Instalasi

This section guides you through the process of installing your PC components into the Eclipse P600S chassis.

4.1. Component Breakdown

Familiarize yourself with the various removable and adjustable components of the case.

Gambar 4.1: Sebuah ledakan view illustrating the various components of the Phanteks Eclipse P600S, including panels, brackets, and filters.

4.2. Mempersiapkan Sasis

1. Letakkan sasis di atas permukaan yang stabil dan rata.
2. Remove the tempered glass side panel by unlatching it and carefully lifting it away.
3. Remove the rear side panel to access the cable management area.

Image 4.2: The Phanteks Eclipse P600S with its tempered glass side panel open, revealing the spacious interior.

4.3. Instalasi Motherboard

1. Install the necessary motherboard standoffs for your specific motherboard form factor (E-ATX, ATX, uATX, mITX).
2. Letakkan motherboard Anda dengan hati-hati di atas penyangga, sejajarkan lubang sekrupnya.
3. Kencangkan motherboard dengan sekrup yang disediakan.

4.4. Instalasi Perangkat Penyimpanan

The P600S supports up to 10x 3.5" HDDs (4 included) and 3x 2.5" SSDs (3 included).

• HDD 3.5 inci: Mount HDDs into the removable drive trays located in the PSU shroud area. Slide the trays back into their slots until they click into place.
• SSD 2.5 inci: Mount SSDs onto the dedicated 2.5" brackets, then secure these brackets to the rear of the motherboard tray.

Gambar 4.3: Interior view of the Phanteks Eclipse P600S, highlighting the drive bay area beneath the PSU shroud.

4.5. Instalasi Unit Catu Daya (PSU)

1. Slide the PSU into the dedicated compartment at the bottom rear of the chassis.
2. Kencangkan PSU dengan sekrup dari bagian belakang casing.

4.6. Koneksi I/O Depan

Connect the front I/O cables to your motherboard. The P600S features:

• 1x USB 3.1 Type-C port
• 2x port USB 3.0
• Soket mikrofon
• Soket headphone
• Tombol reset

Image 4.4: Close-up of the Phanteks Eclipse P600S front I/O panel, showing the USB 3.0, USB-C, and audio ports.

4.7. Pemasangan Kipas dan Radiator

Casing ini mendukung berbagai konfigurasi kipas dan radiator:

• Depan: Up to 3x 120mm or 3x 140mm fans (3x 140mm DRGB fans pre-installed). Radiator support up to 360mm (120mm) or 420mm (140mm).
• Atas: Up to 3x 120mm or 2x 140mm fans. Radiator support up to 360mm (120mm) or 280mm (140mm).
• Belakang: 1x 120mm or 1x 140mm fan. Radiator support 120mm or 140mm.

Connect all fan cables to the universal fan hub located behind the motherboard tray, then connect the fan hub to your motherboard's fan header and a SATA power connector.

5. Operating Modes: Silent vs. Performance

The Eclipse P600S features a hybrid design allowing you to optimize for either quiet operation or maximum airflow.

Image 5.1: Diagram illustrating the two interchangeable modes of the Phanteks Eclipse P600S: Silent Mode and High-Performance Mode.

5.1. Mode Senyap

For reduced noise, ensure the front and top panels are closed. These panels are lined with sound-dampening material to minimize acoustic output from your components.

Gambar 5.2: Depan view of the Phanteks Eclipse P600S with the solid front panel closed, optimized for silent operation.

5.2. High-Performance Mode

For maximum airflow and cooling, remove the front and top sound-dampening panels to reveal the high-airflow fabric mesh. This allows for unrestricted air intake and exhaust.

Gambar 5.3: Depan view of the Phanteks Eclipse P600S with the front panel removed, exposing the mesh for high-performance airflow.

Image 5.4: An airflow diagram illustrating the optimized air pathways within the Phanteks Eclipse P600S chassis.

6. Pemeliharaan

Regular maintenance ensures optimal performance and longevity of your PC case.

• Filter Debu: The Eclipse P600S includes removable dust filters at the front, top, and bottom. Regularly clean these filters by gently removing them and washing them with water or brushing off accumulated dust. Ensure they are completely dry before reinstallation.
• Pembersihan Eksterior: Lap permukaan luar dengan lembut, damp kain. Hindari pembersih atau pelarut abrasif.
• Pembersihan Interior: Periodically use compressed air to remove dust from internal components and fan blades. Ensure the system is powered off and unplugged before cleaning.

7. Penyelesaian masalah

If you encounter issues with your PC build, consider the following common troubleshooting steps related to the chassis:

• Tidak Ada Daya: Ensure the power supply is correctly installed and connected, and all front panel power switch cables are securely attached to the motherboard.
• Fans Not Spinning/DRGB Not Lighting: Verify that all fan cables are connected to the fan hub, and the fan hub is receiving SATA power. Check DRGB connections to the motherboard or controller.
• Port USB Tidak Berfungsi: Confirm that the front panel USB 3.0 and USB 3.1 Type-C cables are correctly plugged into the corresponding headers on your motherboard.
• Aliran Udara Buruk/Terlalu Panas: Ensure the case is in High-Performance mode (mesh panels exposed) if high cooling is required. Clean all dust filters. Verify fan orientation for proper intake and exhaust.
• Kebisingan Berlebihan: If in Silent Mode, ensure all sound-dampening panels are securely closed. Check for loose components or vibrating fan mounts.

8. Spesifikasi

9. Garansi dan Dukungan

Phanteks products are designed and manufactured to the highest quality standards. For detailed warranty information and technical support, please refer to the official Phanteks websitus web atau hubungi layanan pelanggan mereka secara langsung. Simpan bukti pembelian Anda untuk klaim garansi.

Untuk bantuan lebih lanjut, kunjungi halaman dukungan resmi Phanteks: www.phanteks.com/support.html