Buku Panduan Penggunaan Pemanas Konvektor Dinding Ultra-Tenang Stelpro (ASHC2002W)

1. Pendahuluan dan Selesaiview

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Stelpro Ultra-Quiet Wall Convector Heater, Model ASHC2002W. Please read all instructions carefully before use and retain this manual for future reference.

The Stelpro ASHC2002W is an economical wall-mounted convector heater designed to provide dependable, quiet convection heating for spaces up to 200 square feet. It features a slim design, a built-in electronic thermostat, and a durable finish, making it suitable for various indoor environments.

Image 1.1: Stelpro Ultra-Quiet Wall Convector Heater (ASHC2002W)

2. Informasi Keselamatan

WARNING: This heater is hardwired only and is NOT a plug-in unit. Installation must be performed by a qualified electrician in accordance with all local and national electrical codes.

• Baca semua petunjuk sebelum memasang atau menggunakan pemanas ini.
• Pastikan aliran listrik terputus di pemutus sirkuit utama sebelum pemasangan atau perawatan.
• Do not install the heater closer than 3 feet (0.9 m) from the front of the heater and away from the side and rear of any combustible materials (e.g., curtains, draperies, furniture).
• Do not install the heater in areas where gasoline, paint, or other flammable liquids are stored.
• Pemanas ini dirancang untuk penggunaan di dalam ruangan saja.
• Keep the top air discharge grille clear of obstructions to ensure proper airflow.

3. Isi Paket

Verifikasi bahwa semua komponen ada dan tidak rusak saat membuka kemasan:

• Stelpro Ultra-Quiet Wall Convector Heater (ASHC2002W)
• Concealed Mounting Bracket
• Back Entry Plate with Cable Clamps
• Perangkat Keras Instalasi (sekrup, jangkar)
• Manual Instruksi

4. Spesifikasi

Gambar 4.1: Dimensi Produk

5. Instalasi

IMPORTANT: This heater requires a 240V (or 208V) hardwired connection. It is not a plug-in unit. All wiring must be done by a qualified electrician.

Image 5.1: Hardwired Connection Requirement

5.1 Memasang Pemanas

1. Choose a suitable wall location, ensuring at least 3 feet (0.9 m) clearance from any combustible materials in front, and adequate clearance from sides and rear.
2. Use the provided mounting bracket and hardware. The heater is designed for surface-mount installation.
3. Mark the drilling points on the wall using the concealed bracket as a template.
4. Drill pilot holes and insert the appropriate wall anchors (if needed for drywall).
5. Kencangkan braket pemasangan ke dinding menggunakan sekrup yang disediakan.
6. Ensure the bracket is level and securely fastened to support the heater's weight.

Image 5.2: Concealed Mounting Bracket

5.2 Kabel Listrik

1. Ensure power is OFF at the main circuit breaker.
2. Route the 240V (or 208V) electrical supply wires to the heater's back entry plate.
3. Connect the supply wires to the heater's terminals using the cable clamps, following the wiring diagram in the full owner's manual.
4. Amankan semua sambungan dan pastikan tidak ada kabel telanjang yang terbuka.
5. Carefully attach the heater to the mounted bracket, ensuring it locks into place.
6. Pulihkan aliran listrik pada pemutus sirkuit utama.

6. Petunjuk Pengoperasian

Your Stelpro convector heater features a built-in electronic thermostat for precise temperature control.

Image 6.1: Built-in Electronic Thermostat

6.1 Mengatur Suhu

• Use the up/down arrows on the thermostat's LCD screen to adjust the desired room temperature.
• Pemanas akan secara otomatis mempertahankan suhu yang telah diatur.

Mode Pengoperasian 6.2

• Mode Otomatis: This mode can be programmed to automatically lower the temperature at night, contributing to energy savings. Refer to the full owner's manual for programming details.
• Mode Keamanan: This feature allows you to lock the maximum setpoint temperature for safety, preventing accidental or unauthorized adjustments to higher temperatures.

7. Pemeliharaan

Perawatan rutin memastikan kinerja optimal dan umur pemanas Anda.

• Pembersihan: Ensure the heater is turned off and cool before cleaning. Use a soft, damp Gunakan kain untuk membersihkan bagian luar. Jangan gunakan pembersih abrasif atau pelarut.
• Air Grilles: Periodically check the air intake (bottom) and discharge (front) grilles for dust or debris accumulation. Gently vacuum or brush away any blockages to maintain efficient airflow.
• Inspeksi Tahunan: It is recommended to have a qualified electrician inspect the heater and its wiring connections annually.

8. Penyelesaian masalah

Jika pemanas Anda tidak berfungsi dengan benar, periksa masalah umum berikut sebelum menghubungi dukungan:

• Pemanas tidak menyala: Check the main circuit breaker to ensure power is supplied. Verify that the heater is securely mounted to the wall, as it contains a safety switch that prevents operation if not properly installed.
• Panas Tidak Cukup: Ensure the thermostat is set to a temperature higher than the current room temperature. Check for any obstructions around the air grilles. Verify the heater's wattage matches the room size (up to 200 sq ft for 2000W/240V).
• Suara-suara yang Tidak Biasa: While designed for quiet operation, minor expansion/contraction noises may occur during heating/cooling cycles. If loud or persistent noises occur, disconnect power and contact support.
• Thermostat Display Issues: If the LCD display is blank or erratic, try resetting the circuit breaker for a few minutes.

For persistent issues or complex problems, please refer to the warranty and support section.

9. Garansi dan Dukungan

Your Stelpro Ultra-Quiet Wall Convector Heater (ASHC2002W) is backed by the following warranties:

• Garansi Terbatas 5 Tahun pada unit secara keseluruhan.
• Garansi Seumur Hidup pada elemen pemanas.
• Garansi 3 Tahun pada komponen elektronik.

For technical support, warranty claims, or further assistance, please contact Stelpro customer service. Refer to the contact information provided in your owner's manual or visit the official Stelpro weblokasi.