Perkenalan
The Phanteks Eclipse G360A is a high-performance mid-tower gaming chassis designed for optimal airflow and component compatibility. It features an ultra-fine performance mesh front panel for superior cooling and dust filtration, integrated Digital-RGB lighting, and extensive support for modern gaming hardware including large GPUs and advanced liquid cooling solutions. This manual provides detailed instructions for setting up, operating, and maintaining your Eclipse G360A chassis.
Pengaturan dan Instalasi
1. Membuka Kemasan dan Isi
Carefully remove the chassis from its packaging. Verify that all components and accessories are present. The package should include the Eclipse G360A chassis, pre-installed 120mm D-RGB fans, and an accessory box containing screws, zip ties, and the user manual.
2. Kompatibilitas Komponen
- Dukungan Motherboard: ATX, micro-ATX, mini-ITX, E-ATX (up to 280mm wide).
- Panjang GPU: Up to 400 mm (15.7 in).
- Tinggi Pendingin CPU: Up to 162 mm (6.3 in).
- Panjang PSU: Up to 220 mm (280 mm depending on HDD cage location).
- Penyimpanan: 2x 3.5" internal (included), 3x 2.5" internal (2 included).
Gambar 1: Internal view highlighting 400mm GPU clearance, supporting high-end graphics cards.
Figure 2: Multiple storage options for 2.5" and 3.5" drives, with flexible mounting points.
3. Langkah-langkah Instalasi
- Siapkan Sasis: Remove the tempered glass side panel by unscrewing the thumb screws. The front panel can be detached for easier fan/radiator installation.
Figure 3: Detachable front panel and fan bracket for simplified installation.
- Instal Motherboard: Secure your motherboard to the standoffs using the provided screws.
- Instal Drive Penyimpanan: Mount 2.5" SSDs to the dedicated locations behind the motherboard tray or on the PSU shroud. Install 3.5" HDDs into the drive cages located under the PSU shroud.
- Pasang Unit Catu Daya (PSU): Slide the PSU into its designated compartment at the bottom rear of the chassis and secure it with screws.
- Pasang Kartu Grafis (GPU): Insert your graphics card into the PCIe slot on the motherboard. The chassis supports vertical GPU mounting with an optional bracket (PH-VGPUKT4.0_03).
- Install Cooling Components: The G360A supports various fan and radiator configurations.
- Dukungan Penggemar: Front: 3x 120mm (3 pre-installed) or 2x 140mm; Top: 3x 120mm or 2x 140mm; Rear: 1x 120mm.
- Dukungan Radiator: Front: Up to 360mm or 280mm; Top: Up to 360mm; Rear: 120mm. Note: Front and top 360mm radiators cannot be installed simultaneously.
Figure 4: Detailed fan and radiator placement options for optimal cooling.
- Manajemen Kabel: Utilize the 36mm (1.4 in) cable management space behind the motherboard tray to route and secure cables for a clean build and improved airflow.
Petunjuk Pengoperasian
1. Front I/O Panel Functions
The front I/O panel provides convenient access to essential controls and ports:
- Tombol Daya: Menghidupkan atau mematikan sistem.
- 2x Port USB 3.0: Untuk menghubungkan perangkat USB.
- Microphone/Headphone Combo Jack: Untuk masukan dan keluaran audio.
- D-RGB Mode Button: Cycles through pre-programmed lighting effects.
- D-RGB Color Button: Changes the color of the D-RGB lighting.
Figure 5: Front I/O panel with easy-access controls for power, USB, audio, and D-RGB lighting.
2. Digital-RGB Lighting Control
The Eclipse G360A features integrated D-RGB lighting with pre-installed 120mm D-RGB fans and an LED strip along the tempered glass panel. The lighting can be controlled in two ways:
- Kontrol manual: Use the D-RGB Mode and Color buttons on the front I/O panel to cycle through various effects and colors without software.
- Sinkronisasi Motherboard: The D-RGB controller can be connected to a compatible motherboard's D-RGB header (e.g., ASUS Aura Sync, MSI Mystic Light Sync, GIGABYTE RGB Fusion, ASRock Polychrome Sync, Razer Chroma). This allows for software control and synchronization with other D-RGB components in your system. Refer to your motherboard manual for D-RGB header location and software instructions.
Figure 6: Integrated D-RGB lighting and compatibility with major motherboard synchronization software.
Pemeliharaan
1. Cleaning the Ultra-fine Performance Mesh
The front panel's ultra-fine mesh acts as a dust filter. To maintain optimal airflow and prevent dust buildup, regularly clean the mesh:
- Gently detach the front panel.
- Use a soft brush or compressed air to remove accumulated dust from the mesh.
- Wipe the mesh with a slightly damp cloth if necessary, ensuring it is completely dry before reattaching.
Figure 7: The ultra-fine performance mesh design, crucial for airflow and dust filtration.
2. General Chassis Cleaning
For general cleaning of the chassis exterior and interior:
- Pastikan sistem dimatikan dan dicabut.
- Use a microfiber cloth to wipe down exterior surfaces.
- For interior dust, use compressed air to blow dust out of components and the chassis.
- Bersihkan panel kaca tempered dengan cairan pembersih kaca dan kain lembut.
Penyelesaian Masalah
Masalah Umum dan Solusinya
| Masalah | Kemungkinan Penyebab | Larutan |
|---|---|---|
| Sistem tidak menyala. | Loose power connections, faulty PSU, incorrect front panel header connection. | Check all power cables (24-pin, 8-pin CPU, GPU). Verify front panel power switch connection to motherboard. Test PSU if possible. |
| D-RGB lighting not working or incorrect. | Loose D-RGB cable connection, incorrect D-RGB header, software conflict. | Ensure D-RGB cables are securely connected. If using motherboard sync, verify connection to a 3-pin 5V D-RGB header (not 4-pin 12V RGB). Try manual control via case buttons. Reinstall or update motherboard RGB software. |
| Aliran udara buruk atau suhu tinggi. | Dust buildup, incorrect fan orientation, obstructed airflow. | Clean front mesh and other dust filters. Ensure fans are oriented correctly (intake/exhaust). Check for cable obstructions inside the case. |
| Port USB depan tidak berfungsi. | Loose USB 3.0 header cable connection to motherboard. | Pastikan kabel USB 3.0 dari panel depan terhubung dengan aman ke header USB 3.0 pada motherboard. |
Spesifikasi
| Fitur | Detil |
|---|---|
| Nama Model | Gerhana G360A |
| Nomor Model | PH-EC360ATG_DBK02 |
| Faktor Bentuk | Menara Tengah |
| Dimensi (P x L x T) | 455x200x465mm / 17.9x7.87x18.3 inci |
| Bahan | Steel Chassis, Tempered Glass |
| Dukungan Motherboard | ATX, micro-ATX, mini-ITX, E-ATX (lebar hingga 280mm) |
| I/O Depan | 2x USB 3.0, Microphone/Headphone Combo, Power Button, D-RGB Mode, D-RGB Color |
| Slot Ekspansi | 7 |
| Ruang Drive Internal 3.5" | 2 (2x included) |
| Ruang Drive Internal 2.5" | 3 (2x included) |
| Kipas yang sudah terpasang sebelumnya | 3x 120mm D-RGB (Front) |
| Dukungan Kipas (120mm) | Front: 3x; Top: 3x; Rear: 1x |
| Dukungan Kipas (140mm) | Front: 2x; Top: 2x |
| Radiator Support (120mm) | Front: Up to 360mm; Top: Up to 360mm; Rear: 120mm |
| Radiator Support (140mm) | Front: Up to 280mm; Top: Up to 360mm |
| Panjang GPU Maks | 400 mm / 15.7 inci |
| Tinggi Pendingin CPU Maksimum | 162 mm / 6.3 inci |
| Ruang Manajemen Kabel | 36 mm / 1.4 inci |
| Panjang PSU Maks | 220 mm / 280 mm (depends on HDD Cage location) |
Garansi dan Dukungan
Informasi Garansi
Phanteks products are manufactured to the highest quality standards. For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official Phanteks webGaransi biasanya mencakup cacat material dan pengerjaan dalam penggunaan normal.
Dukungan Pelanggan
Should you encounter any issues or have questions regarding your Phanteks Eclipse G360A chassis, please contact Phanteks customer support. You can find contact information, FAQs, and additional resources on the official Phanteks weblokasi:
