Produk Selesaiview
Gambar 0: Depan view of the Anern PSC 20A Solar Charge Controller, highlighting its LCD screen and control buttons.
The Anern PSC 20A Solar Charge Controller is designed to manage the power flow from your solar panels to your battery bank, ensuring efficient charging and protecting your battery from overcharge and over-discharge. This intelligent controller automatically detects 12V/24V system voltages and features a clear LCD display for monitoring system status and adjusting parameters. It includes dual USB ports for charging external devices.
Fitur Utama
- Automatic management of solar panel and battery operation.
- Built-in industrial micro-controller for stable performance.
- Large LCD display for real-time data and adjustable parameters.
- Sepenuhnya 3-stage PWM charge management (Bulk, ABS, Float).
- Multiple protection functions: short-circuit, open-circuit, reverse polarity, over-load, low voltage, and overcharge protection.
- Dual 5V/2A USB ports for device charging.
Petunjuk Keselamatan
Please read and understand these safety instructions before installation and operation to prevent damage to the controller, battery, or other components.
- This controller is only suitable for lead-acid batteries: OPEN, AGM, and GEL types. It is not compatible with nickel-metal hydride, lithium-ion, or other battery types.
- The charge controller is designed exclusively for regulating solar modules. Do not connect any other charging sources to the charge regulator.
- The LCD display may have a voltage error of 0.2V - 0.3V, which is considered normal.
- Ensure battery cables are as short as possible to minimize power loss and maximize efficiency.
Spesifikasi
| Parameter | Nilai |
| Vol bateraitage | 12V/24V Auto Adapt |
| Arus Pengisian | 20A |
| Arus Pelepasan | 10A |
| Mengapung Jiltage | 13.7V (dapat disesuaikan) |
| Keluaran USB | 5V/2A (Dual USB) |
| Suhu Operasional | -35°C hingga +60°C |
| Dimensi Produk | Ukuran 12x5x17 cm |
| Berat Produk | 140 g (kira-kira 4.94 ons) |
| Jenis Tampilan | Layar LCD |
| Bahan | Plastik |
Pengaturan dan Instalasi
Follow these steps for proper installation of the solar charge controller. Ensure all connections are secure and correct to prevent damage.
- Hubungkan Baterai: First, connect the battery to the charge controller. Ensure correct polarity (+ to + and - to -). The controller will automatically detect the battery voltage (12V atau 24V).
- Hubungkan Panel Surya: Next, connect the solar panels (PV array) to the charge controller. Again, observe correct polarity.
- Hubungkan Beban DC: Finally, connect your DC load (e.g., lights) to the charge controller.
Important Wiring Sequence:
Battery → Solar Panels → DC Load
Gambar 1: Wiring diagram illustrating the connection sequence for the solar charge controller, including solar panels, battery, and load. Ensure positive and negative terminals are correctly matched.
Fungsi Perlindungan
The controller incorporates several protection features to safeguard your system:
Gambar 2: Lebihview of the controller's built-in protection mechanisms, including safeguards against reverse polarity, over-voltage, di bawah volumetage, dan kondisi arus berlebih.
Operasi
Antarmuka Tampilan LCD
The LCD provides real-time information about your solar system. The interface includes icons and numerical values for easy monitoring.
Gambar 3: Terperinci view of the LCD display, explaining each icon and its corresponding meaning for system status monitoring.
Muat Mode Kerja
The controller offers three distinct load working modes, which can be configured via the LCD interface:
- 24H (24-hour operation): The load operates continuously for 24 hours.
- 0H (Light control mode): The load works only after dark.
- 1H-23H (Light and time control modes): The load works after dark for a set duration, configurable from 1 to 23 hours.
Gambar 4: Visual representation of the three selectable load operating modes and their respective icons.
Pemeliharaan
The Anern PSC 20A Solar Charge Controller is designed for low maintenance. However, regular checks can ensure optimal performance and longevity:
- Periksa secara berkala semua sambungan kabel untuk memastikan semuanya kencang dan bebas dari korosi.
- Jaga agar kontroler tetap bersih dan bebas dari debu dan kotoran. Gunakan kain kering untuk membersihkannya.
- Ensure adequate ventilation around the controller to prevent overheating.
- Monitor the LCD display regularly for any error codes or unusual readings.
Penyelesaian Masalah
Bagian ini membahas masalah umum yang mungkin Anda temui dengan pengontrol pengisian daya surya Anda.
Pertanyaan & Jawaban Umum
- Q: Why does the LCD screen become blank?
- A: The solar controller will stop outputting when the battery voltage drops below approximately 8V. In this state, the LCD screen will go blank. When the solar panels begin charging the battery again, the controller will resume output once the battery voltage kembali ke 12.6V.
If you encounter other issues not listed here, please refer to the support section.
Garansi dan Dukungan
For warranty information or technical support, please contact Anern customer service through the retailer where you purchased the product or visit the official Anern website. Please have your model number (PSC-20A) and purchase details ready when contacting support.
