Phanteks Eclipse G500A DRGB Mid Tower Case User Manual

1. Produk Lebihview

The Phanteks Eclipse G500A DRGB is a high-performance mid-tower chassis designed to accommodate modern PC components with excellent airflow and integrated D-RGB lighting. It features an Ultra-fine Performance Mesh on both the front and top panels, ensuring optimal cooling and dust filtration.

Figure 1: Phanteks Eclipse G500A DRGB Mid Tower Case, Matte White.

Fitur Utama:

• Desain Aliran Udara Tinggi: Ultra-fine Performance Mesh on front and top panels for superior cooling and dust filtration.
• Pencahayaan D-RGB Terintegrasi: Built-in D-RGB lighting on the front and side, controllable via manual buttons or motherboard synchronization.
• Kipas Pra-instal: Includes three high-performance M25-140 D-RGB fans.
• Dukungan Pendinginan yang Komprehensif: Supports up to 420mm radiators in the front and 360mm in the top.
• Interior yang Luas: Accommodates full-length GPUs and offers vertical GPU mounting options (with optional bracket).
• Penyimpanan Fleksibel: Multiple HDD and SSD locations, including dedicated SSD brackets and stackable HDD bays.
• Input/Output Front Modern: Features 10Gbps USB-C, 2x USB 3.0, Microphone/Headphone Combo, Power button, and D-RGB controls.

2. Pengaturan dan Instalasi

This section provides general guidelines for installing components into your Phanteks Eclipse G500A DRGB chassis. Always refer to your component manuals for specific installation instructions.

2.1 Mempersiapkan Sasis

Before installing components, ensure the chassis is placed on a stable, flat surface. Remove the side panels by gently pulling them open (they are hinged) to access the interior.

Figure 2: The removable front panel allows for easy installation of fans and radiators.

Figure 3: The removable top mesh panel facilitates fan and radiator installation.

2.2 Instalasi Papan Utama

The G500A supports ATX, micro-ATX, mini-ITX, and E-ATX motherboards (up to 280mm wide). Install the necessary standoffs for your motherboard form factor, then secure the motherboard with screws.

2.3 Instalasi Unit Catu Daya (PSU)

Install the PSU at the bottom rear of the chassis. The G500A supports PSUs up to 250mm in length (195mm if all 4 bottom HDD positions are used).

2.4 Pemasangan Perangkat Penyimpanan

The case offers extensive storage options:

• SSD 2.5 inci: Up to 9 dedicated 2.5" drive bays are included.
• HDD 3.5 inci: Two stackable 3.5" HDD bays are included, expandable up to a total of 10 HDD bays.

Figure 4: Multiple storage options for 2.5" and 3.5" drives.

2.5 Instalasi Kartu Grafis (GPU)

The G500A supports graphics cards up to 435mm in length. For vertical GPU mounting, an optional bracket (PH-VGPUKT4.0_03) or riser cable is required.

2.6 Pemasangan Sistem Pendingin

Sasis mendukung berbagai konfigurasi kipas dan radiator:

• Dukungan Penggemar:
  • Front: 3x 120mm or 3x 140mm (3x 140mm pre-installed)
  • Top: 3x 120mm or 3x 140mm
  • Belakang: 1x 120mm atau 1x 140mm
• Dukungan Radiator Pendingin Cair:
  • Front: Up to 360mm (120mm radiator) or 420mm (140mm radiator)
  • Top: Up to 360mm (120mm radiator) or 280mm (140mm radiator)
  • Belakang: 120mm

Figure 5: High-end cooling compatibility with various fan and radiator sizes.

2.7 Manajemen Kabel

The G500A provides ample space and Velcro ties for efficient cable management, ensuring a clean interior and optimal airflow. Cover doors help to conceal cables on the backside of the motherboard tray.

2.8 Video Instalasi

3. Petunjuk Pengoperasian

3.1 Panel I/O Depan

Panel I/O depan menyediakan akses mudah ke port dan kontrol penting:

• Tombol Daya: Untuk menghidupkan/mematikan sistem Anda.
• Port USB 3.0 (x2): Untuk menghubungkan perangkat USB 3.0.
• USB-C Gen2 Port (x1): For high-speed USB-C connectivity.
• Microphone/Headphone Combo Jack: Untuk masukan dan keluaran audio.
• D-RGB Mode Button: Cycles through pre-programmed D-RGB lighting effects.
• D-RGB Color Button: Changes the color of the D-RGB lighting.

Figure 6: Front I/O panel with USB-C, USB 3.0, audio, and D-RGB controls.

3.2 Kontrol Pencahayaan D-RGB

The integrated D-RGB lighting can be controlled in two ways:

• Kontrol manual: Use the D-RGB Mode and Color buttons on the front I/O panel to cycle through effects and colors without software.
• Sinkronisasi Motherboard: Connect the D-RGB controller to a compatible motherboard's D-RGB header to enable software control and synchronization with other D-RGB components.

Figure 7: Integrated D-RGB lighting with included M25-140 D-RGB fans.

4. Pemeliharaan

Perawatan rutin membantu memastikan kinerja optimal dan umur panjang komponen PC Anda.

• Penyaringan Debu: The Ultra-fine Performance Mesh on the front and top panels acts as a dust filter. Periodically remove these panels and clean the mesh to maintain optimal airflow.
• Pembersihan Interior: Use compressed air to remove dust from inside the chassis, especially from fans, heatsinks, and other components. Ensure the system is powered off and unplugged before cleaning.
• Pembersihan Eksterior: Lap permukaan luar dengan lembut, damp kain. Hindari pembersih atau pelarut abrasif.

5. Penyelesaian masalah

Bagian ini membahas masalah umum yang mungkin Anda temui dengan casing PC Anda.

5.1 Masalah Daya

• Sistem tidak menyala:
  • Ensure all power cables (24-pin ATX, 8-pin CPU, GPU power) are securely connected to the motherboard and components.
  • Pastikan sakelar PSU berada pada posisi 'ON'.
  • Check that the front panel power switch cable is correctly connected to the motherboard's F_PANEL header.

5.2 D-RGB Lighting Issues

• D-RGB not lighting up or incorrect colors:
  • Ensure the D-RGB cables from the fans and LED strips are correctly connected to the integrated D-RGB controller.
  • If using motherboard synchronization, ensure the D-RGB controller is connected to the motherboard's D-RGB header and that the motherboard's lighting software is configured correctly.
  • Verify the D-RGB controller is receiving power (e.g., via SATA power connector).
  • Try cycling through modes and colors using the front I/O buttons to rule out software issues.

5.3 Fan Noise or Malfunction

• Kebisingan kipas yang berlebihan:
  • Periksa apakah ada penumpukan debu pada bilah kipas dan bersihkan jika perlu.
  • Ensure fans are securely mounted and not vibrating against the chassis.
  • Verify fan speeds are controlled appropriately by the motherboard or fan controller.
• Kipas tidak berputar:
  • Check fan power connections to the motherboard or fan hub.
  • Ensure fan headers are enabled in the BIOS/UEFI settings.

6. Spesifikasi

Detailed technical specifications for the Phanteks Eclipse G500A DRGB Mid Tower Case.

7. Garansi dan Dukungan

Phanteks products are manufactured with high-quality standards. For warranty information and technical support, please refer to the official Phanteks websitus atau hubungi layanan pelanggan mereka.

Informasi Kontak:

• Weblokasi: www.phanteks.com
• Phanteks Taiwan Inc.: 11F., No. 150, Jian 1st Rd., Distrik Zhonghe, Kota Taipei Baru 235
• Importer EU (Axpertec Int B.V.): Sydneystraat 33, 3047 BP Rotterdam, The Netherlands
• Importer US (Axpertec Inc.): 20465 E Walnut Dr. N, City of Industry, California 91789, United States

Figure 8: Phanteks company and importer details, along with compliance markings (CE, UKCA, RoHS).