FSP Dagger Pro 850W SFX Power Supply User Manual (SDA2-850-Gen5)

1. Pendahuluan

This manual provides detailed instructions for the installation, operation, and maintenance of your FSP Dagger Pro 850W SFX Power Supply. The FSP Dagger Pro series is designed for small form factor (SFX) systems, offering high efficiency and reliable power delivery for demanding components.

Key features of the FSP Dagger Pro 850W SFX Power Supply include:

ATX 3.1 / PCIe 5.1 Compliance: Equipped with a native 12VHPWR connector and cable, supporting the latest generation hardware power demands.
Desain Modular Sepenuhnya: Allows for connecting only necessary cables, improving airflow and reducing cable clutter within compact PC builds.
Compact SFX Form Factor: Compatible with most Mini-ITX and Micro ATX cases, ideal for small form factor PCs.
80 PLUS Gold Certified Efficiency: Achieves over 90% efficiency at typical loads, contributing to lower power consumption, reduced heat output, and quieter operation.
Single +12V Rail Design: Provides full power to VGA cards individually, preventing overloading conditions.

FSP Dagger Pro 850W SFX Power Supply, top-down view showing the fan grill and modular cable ports.

Image 1.1: FSP Dagger Pro 850W SFX Power Supply, showcasing its compact design and modular cable interface.

2. Informasi Keselamatan

WARNING: Improper installation or use can result in serious injury or damage to equipment. Please read and follow all instructions carefully.

Selalu lepaskan kabel daya dari stopkontak di dinding sebelum memasang, melepas, atau membersihkan catu daya.
Jangan membuka unit catu daya. Vol tinggitagTerdapat komponen di dalamnya, dan tidak ada komponen yang dapat diservis oleh pengguna. Membuka unit akan membatalkan garansi.
Ensure the power supply is installed in a well-ventilated area. Do not block any ventilation openings.
Use only the modular cables provided with this power supply. Using third-party cables may cause damage to the PSU or connected components.
This product is designed for use in computer systems. Do not use it for any other purpose.
Keep the power supply away from water, moisture, and extreme temperatures.

3. Isi Paket

Verifikasi bahwa paket Anda berisi item berikut:

FSP Dagger Pro 850W SFX Power Supply Unit
Modular Cable Set (including 12VHPWR, Motherboard 24-pin, CPU 8-pin, PCIe 6+2-pin, SATA, Peripheral)
Kabel Daya AC
Sekrup Pemasangan
User Manual (dokumen ini)

Diagram showing the FSP Dagger Pro SFX Power Supply dimensions and a bundle of modular cables.

Image 3.1: Illustration of the compact dimensions of the Dagger Pro PSU and the included modular cable set.

4. Pengaturan dan Instalasi

Follow these steps to install your FSP Dagger Pro 850W SFX Power Supply into your computer system.

4.1. Instalasi Fisik

Siapkan sistem Anda: Ensure your computer is powered off and the power cord is disconnected from the wall outlet. Open your computer case to access the power supply mounting area.
Remove old PSU (if applicable): If replacing an existing power supply, disconnect all cables from components and remove the old PSU from the case.
Mount the new PSU: Carefully place the FSP Dagger Pro 850W into the SFX power supply bay of your case. Secure it using the provided mounting screws. Ensure the fan is oriented correctly for optimal airflow, typically facing inwards or downwards depending on case design.

FSP Dagger Pro 850W SFX Power Supply installed in a computer case, showing the power switch and AC inlet.

Image 4.1: The FSP Dagger Pro PSU mounted in a system, highlighting the rear power switch and AC input.

4.2. Koneksi Kabel

The Dagger Pro 850W is a fully modular power supply. Connect only the cables required for your system components.

Jarak dekat view of the modular cable ports on the FSP Dagger Pro 850W SFX Power Supply, labeled for CPU, PCIe, 12V-2x6, Peripheral, and Motherboard.

Gambar 4.2: Detail view of the modular cable connection panel on the PSU.

Motherboard Power (24-pin): Connect the 24-pin ATX cable from the PSU to the corresponding port on your motherboard. Ensure it clicks into place.
CPU Power (4+4-pin or 8-pin): Connect the CPU power cable(s) from the PSU to the CPU power connector(s) on your motherboard. High-end motherboards may require two 8-pin connectors.
PCIe Power (6+2-pin or 12VHPWR):
- For graphics cards requiring 6-pin or 8-pin PCIe connectors, use the provided 6+2-pin cables.
- For NVIDIA RTX 40 series graphics cards or other GPUs requiring the new 12VHPWR connector, use the dedicated 12VHPWR cable. Ensure it is fully seated into both the PSU and the graphics card.
Image 4.3: The 12VHPWR connector on the Dagger Pro PSU, designed for modern high-power graphics cards.
Daya SATA: Hubungkan kabel daya SATA ke SSD, HDD, dan drive optik Anda.
Peripheral Power (Molex): Connect peripheral power cables for case fans, fan controllers, or other accessories that use Molex connectors.
Manajemen Kabel: Tata kabel dengan rapi untuk meningkatkan aliran udara dan estetika dalam casing Anda.

5. Petunjuk Pengoperasian

Once all components are connected and secured, you can power on your system.

Hubungkan Daya AC: Plug the AC power cord into the power supply's inlet and then into a wall outlet or surge protector.
Power On PSU: Flip the power switch on the back of the power supply to the "ON" (I) position.
Sistem Daya: Tekan tombol daya pada casing komputer Anda.

5.1. Pengoperasian Kipas (Mode Semi-Fanless)

The FSP Dagger Pro 850W features a semi-fanless design for optimized low-noise operation. The fan will remain off (0dBA) under low load conditions (typically below 20% load or <25°C internal temperature). As the load increases, the fan will gradually spin up to maintain optimal temperatures, ensuring quiet operation when not under heavy demand.

Fan curve diagram showing fanless, quiet, and cooling modes based on PSU load and temperature.

Image 5.1: Fan operation curve illustrating the semi-fanless mode for reduced noise at low loads.

6. Pemeliharaan

Pemeliharaan yang tepat memastikan umur panjang dan kinerja optimal catu daya Anda.

Pembersihan: Periodically clean the exterior of the power supply and its fan grill to prevent dust buildup. Use compressed air to gently clear dust from the fan and vents. Always disconnect the power cord before cleaning.
Aliran udara: Ensure that the power supply's intake and exhaust vents are not obstructed. Maintain good airflow within your computer case to prevent overheating.
Pemeriksaan Kabel: Periksa semua sambungan kabel secara berkala untuk memastikan semuanya terpasang dengan aman dan tidak rusak.

7. Penyelesaian masalah

If you encounter issues with your FSP Dagger Pro 850W power supply, refer to the following common problems and solutions:

Masalah	Kemungkinan Penyebab	Larutan
Sistem tidak menyala.	Kabel daya tidak terhubung. Saklar PSU dalam posisi mati. Sambungan kabel longgar. Komponen rusak (motherboard, CPU, dll.). Perlindungan PSU dipicu.	Pastikan kabel daya AC terpasang dengan aman ke PSU dan stopkontak dinding. Flip the PSU switch to the "ON" (I) position. Periksa semua sambungan kabel modular (24-pin, CPU, PCIe) baik di ujung PSU maupun komponen. Uji komponen secara individual jika memungkinkan. Disconnect all power, wait 5 minutes, then reconnect and try again.
Sistem menyala tetapi langsung mati.	Beban lebih atau hubungan arus pendek. Terlalu panas. Komponen yang rusak.	Ensure total system power draw does not exceed 850W. Check for proper component installation and ensure no metal parts are touching the motherboard. Verify adequate case airflow and clean PSU fan/vents.
Kipas tidak berputar.	Semi-fanless mode is active. Halangan pada kipas.	This is normal under low loads. The fan will activate when the load increases. Check for any cables or debris blocking the fan.

If the problem persists after trying these solutions, please contact FSP customer support.

8. Spesifikasi

Detailed specifications for the FSP Dagger Pro 850W SFX Power Supply (SDA2-850-G5):

Fitur	Detil
Nama Model	SFX PSU
Nomor Model Barang	SDA2-850-G5
Faktor Bentuk	Efek suara
Keluaran Wattage	850 Watt
Sertifikasi 80 PLUS	Emas
ATX Standar	ATX 3.1
Standar PCIe	PCIe 5.1 (with native 12VHPWR)
Modularitas	Modular Penuh
Metode Pendinginan	Air (92mm fan, semi-fanless)
Dimensi Produk (P x L x T)	5 x 4 x 2.5 inci (125 x 100 x 63.5 mm)
Berat Barang	4.51 pon (2.05 Kilogram)
Perangkat yang Kompatibel	Komputer, PC
Pabrikan	FSP Group U.S.A

Diagram illustrating the single +12V rail design for efficient power delivery to graphics cards.

Image 8.1: Explanation of the single +12V rail design for stable power to VGA cards.

9. Garansi dan Dukungan

The FSP Dagger Pro 850W SFX Power Supply comes with a Garansi pabrik 10 tahun, menjamin keandalan jangka panjang dan ketenangan pikiran. Garansi ini mencakup kerusakan material dan pengerjaan dalam penggunaan normal.

For technical support, warranty claims, or further assistance, please visit the official FSP websitus web atau hubungi layanan pelanggan mereka. Simpan bukti pembelian Anda untuk validasi garansi.

FSP Official Weblokasi: https://www.fsplifestyle.com/

	FSP Power Supply Manual: Installation, Connectors, Warranty, and Troubleshooting This comprehensive manual from FSP provides detailed instructions for installing and connecting your power supply unit (PSU), explains connector pinouts, outlines the warranty policy, offers troubleshooting guidance, and covers WEEE and RoHS compliance information.
	FSP FlexGURU Series Power Supply Units: FSP250-50FGBBI(M) & FSP300-57FCB - User Manual & Specifications Comprehensive user manual and technical specifications for FSP FlexGURU series power supply units, including models FSP250-50FGBBI(M) and FSP300-57FCB. Features installation guide, connector pinouts, troubleshooting, and RoHS compliance.
	Gambar Mekanik dan Spesifikasi Pinout FSP 9PA250DC00 Gambar mekanis terperinci dan spesifikasi pinout untuk unit catu daya FSP 9PA250DC00, termasuk penugasan kabel, dimensi, dan informasi model dari FSP Group.
	FSP 9PA400CB01 Power Supply Assembly Diagram and Pinout Detailed assembly diagram and pinout information for the FSP 9PA400CB01 power supply unit, including connector specifications, wire details, and dimensions. Model FSP400-70PFL (SK).
	FSP100-50FAB Power Supply Appearance and Wiring Diagram Technical specifications and assembly details for the FSP100-50FAB power supply unit by FSP Technology Inc. Includes detailed wiring information, connector pinouts, wire colors, gauge, lengths, and dimensional data.
	FSP150-ABBN3 Power Supply Mechanical Dimensions and Specifications Detailed mechanical dimensions, physical specifications, and revision history for the FSP150-ABBN3 power supply unit by FSP Technology Inc. Includes part number 9NB1500700 and dimensional tolerances.

FSP SDA2-850-G5