Panduan Pengguna Switch Ethernet Desktop YuanLey 8 Port 2.5G Tanpa Manajemen dengan SFP 10G

1. Pendahuluan

This manual provides detailed instructions for the installation, operation, and maintenance of your YuanLey 8 Port 2.5G Unmanaged Desktop Ethernet Switch with 10G SFP. Please read this manual thoroughly before using the device to ensure proper functionality and to prevent damage.

2. Isi Paket

Verifikasi bahwa paket Anda berisi item berikut:

• 1 x YuanLey 8 Port 2.5G Ethernet Switch
• 1 x Kabel Daya
• 1 x Panduan Pengguna

3. Fitur Produk

• 9 Port Configuration: Includes 8 x 2.5 Gigabit Ethernet ports and 1 x 10G SFP+ Port.
• Kinerja Kecepatan Tinggi: Delivers 2.5 times faster network performance than traditional Gigabit switches, with a switching capacity of up to 60Gbps.
• Pasang dan Mainkan: Unmanaged design requires no configuration for immediate use.
• Durable and Quiet: Features a metal case with 6KV lightning protection and a fanless design for silent operation.
• Suhu Operasional Lebar: Berfungsi dengan andal pada suhu mulai dari -10°C hingga 50°C.
• Penempatan Serbaguna: Supports both wall mount and desktop placement.

4. Produk Lebihview

Figure 4.1: YuanLey 8 Port 2.5G Unmanaged Desktop Ethernet Switch

Gambar 4.2: Panel Depan Atasview with Ports and Indicators

The switch features 8 RJ45 ports supporting 10/100/1000Mbps/2.5G adaptive speeds and 1 SFP+ port for 1G/2.5G/10G fiber connections. LED indicators provide status for power and link activity.

Gambar 4.3: Panel Belakang Bagian Atasview dengan Input Daya

Gambar 4.4: Rinci View of Ports and Indicators

The rear panel includes the DC 12V/1.0A power input port and a grounding screw for electrical safety. The front panel LEDs indicate power status, 2.5Gbps link speed (orange), and 100/1000Mbps link speed (green) for RJ45 ports, and link status for the SFP+ port.

5. Pengaturan

Follow these steps to set up your YuanLey Ethernet Switch:

1. Hubungkan Daya: Plug the provided power adapter into the DC 12V/1.0A input port on the rear of the switch, then plug the adapter into a power outlet. The PWR LED on the front panel will illuminate green.
2. Hubungkan Perangkat Ethernet: Connect your network devices (e.g., computers, NAS, WiFi 6 APs, gaming PCs) to the 2.5G Base-T ports (1-8) using standard Ethernet cables (Cat5e or higher recommended for 2.5G speeds). The corresponding port LEDs will light up to indicate a successful connection and speed.
3. Connect SFP+ Module (Optional): If using the 10G SFP+ port, insert a compatible 1G/2.5G/10G SFP/SFP+ module (not included) into the SFP+ slot. Then, connect a fiber optic cable or DAC cable to the module. The SFP indicator LED will light up when a link is established.

Figure 5.1: Typical Network Setup with the YuanLey Switch

6. Mengoperasikan Sakelar

The YuanLey 2.5G Unmanaged Ethernet Switch is designed for simple plug-and-play operation. Once powered on and connected to your network devices, it will automatically detect the link speed and establish connections without any further configuration.

• Indikator LED: Observe the PWR, L1-L8, and SFP+ Link LEDs to monitor the switch's status and network activity.
• MDI/MDIX Otomatis: The switch supports Auto MDI/MDIX, eliminating the need for crossover cables.
• Adaptive Speed: RJ45 ports automatically adapt to 10/100/1000Mbps or 2.5Gbps.

7. Pemeliharaan

To ensure optimal performance and longevity of your switch, consider the following maintenance guidelines:

• Penempatan: Place the switch in a well-ventilated area, away from direct sunlight, heat sources, and excessive moisture. The fanless design relies on natural convection for cooling.
• Pembersihan: Periodically clean the exterior of the switch with a soft, dry cloth. Avoid using liquid or aerosol cleaners.
• Manajemen Kabel: Pastikan kabel jaringan tertata rapi dan tidak terlalu bengkok atau tegang.
• Catu Daya: Use only the original power adapter provided with the switch.

Figure 7.1: Fanless Design and Environmental Considerations

8. Penyelesaian masalah

Jika Anda mengalami masalah dengan switch Anda, lihat masalah dan solusi umum berikut:

• Tidak Ada Daya:
  • Pastikan adaptor daya terhubung dengan aman ke sakelar dan stopkontak yang berfungsi.
  • Check if the PWR LED is illuminated. If not, try a different power outlet.
• Tidak Ada Tautan/Aktivitas di Port:
  • Verifikasi bahwa kabel Ethernet tersambung dengan aman ke port switch dan perangkat jaringan.
  • Coba kabel Ethernet yang lain.
  • Pastikan perangkat yang terhubung dihidupkan dan berfungsi dengan benar.
  • Check the LED indicator for the specific port. If it's off, there might be no link.
• Kecepatan Jaringan Lambat:
  • Ensure all devices in the network path (NICs, cables, routers) support 2.5G speeds to achieve maximum performance.
  • Use Cat5e or higher-rated Ethernet cables for 2.5G connections.
  • Check the color of the port LED: Orange indicates 2.5Gbps, Green indicates 100/1000Mbps.
• SFP+ Port Issues:
  • Ensure the SFP/SFP+ module is correctly inserted and compatible with the switch.
  • Verify the fiber optic or DAC cable is properly connected and undamaged.
  • Check the SFP indicator LED for link status.

9. Spesifikasi

Gambar 9.1: Dimensi Produk

10. Garansi dan Dukungan

YuanLey products are designed for reliability and performance. For warranty information and technical support, please refer to the official YuanLey websitus web atau hubungi layanan pelanggan mereka secara langsung. Simpan struk pembelian Anda untuk klaim garansi.

Untuk bantuan lebih lanjut, Anda dapat mengunjungi YuanLey Store on Amazon.