Perkenalan
The Westek SLC9BC Smart Programmable Light Control is designed to convert any standard light socket into an automatic light. It features programmable settings for dusk-to-dawn operation or timed shut-off after dusk, enhancing convenience and security. This device is compatible with LED, incandescent, and CFL bulbs up to 100 watts.
Informasi Keselamatan
- Hanya untuk penggunaan dalam ruangan: This device is intended for indoor use. Do not use in outdoor fixtures exposed to rain or direct weather.
- Kompatibilitas Perlengkapan: Do not use with opaque or frosted glass light fixtures, as this may interfere with the light sensor's operation.
- Bohlam Wattage: Ensure the connected bulb does not exceed 100 watts.
- Keamanan Listrik: Always ensure power is off at the switch or circuit breaker before installation or removal.
- Physical Fit: The device adds approximately 2 inches to the height of the bulb. Verify adequate clearance in your fixture to prevent overheating or damage.
Produk Selesaiview
The Westek SLC9BC is a compact light control unit that screws into a standard E26 medium bulb base. It integrates a light sensor and a programmable timer.
Deskripsi Gambar: A pair of Westek SLC9BC light control units. Each unit is white, cylindrical at the top, tapering down to a standard E26 screw-in base. A small black light sensor and a rotary dial with 'D' (Dusk) and numerical settings are visible on the side of each unit.
Deskripsi Gambar: A single Westek SLC9BC light control unit shown from the front. The white plastic body has a small black light sensor and a setting dial visible on its side, above the E26 screw base.
Pengaturan dan Instalasi
- Matikan: Turn off the power to the light fixture at the wall switch or circuit breaker before beginning installation.
- Screw in Control: Carefully screw the Westek SLC9BC light control into the existing E26 medium base light socket. Ensure it is securely tightened.
- Pasang Bohlam: Screw your desired light bulb (LED, incandescent, or CFL, up to 100W) into the Westek SLC9BC unit.
- Adjust Orientation (if needed): The unit includes a small spring-loaded terminal on the base. This allows for minor rotation of the unit within the socket to ensure the light sensor faces an appropriate direction, even if the socket is not fully tightened. This helps optimize light detection.
- Nyalakan: Kembalikan daya ke perlengkapan lampu.
Deskripsi Gambar: Dari atas ke bawah view of a single Westek SLC9BC light control unit, showing the E26 bulb socket at the top where a light bulb would be inserted.
Petunjuk Pengoperasian
The SLC9BC offers multiple operating modes, selected via the rotary dial on the side of the unit.
- Dusk-to-Dawn (D): Set the dial to 'D'. In this mode, the light will automatically turn on when ambient light levels fall below a certain threshold (dusk) and turn off when ambient light levels rise (dawn).
- Timed Off (2, 5, 8 hours): Set the dial to '2', '5', or '8'. In these modes, the light will turn on at dusk and remain on for the selected duration (2, 5, or 8 hours) before automatically turning off.
- Random Off: This feature is integrated into the timed off settings for enhanced security. The actual shut-off time may vary slightly from the set duration to give the appearance of an occupied home.
Pertimbangan Penting:
- Ensure the light sensor is not obstructed by the fixture or other objects.
- Avoid installing the unit in fixtures with opaque or frosted glass, as this can block the sensor and prevent proper operation.
- The sensor requires sufficient ambient light to detect day/night cycles.
Pemeliharaan
The Westek SLC9BC light control requires minimal maintenance.
- Pembersihan: Periodically wipe the exterior of the unit with a soft, dry cloth to remove dust. Do not use liquid cleaners or abrasive materials.
- Sensor Clarity: Ensure the light sensor remains clean and free from obstructions to maintain accurate operation.
- Penggantian Bohlam: When replacing a bulb, always turn off power to the fixture first.
Penyelesaian Masalah
| Masalah | Kemungkinan Penyebab | Larutan |
|---|---|---|
| Lampu tidak menyala saat senja. |
|
|
| Lampu tetap menyala pada siang hari. |
|
|
| Cahaya berkedip atau berkelap-kelip. |
|
|
| Timed off setting is inaccurate. |
|
|
Spesifikasi
- Model: SLC9BC
- Masukan Voltage: Tegangan 120V, 60Hz
- Wat Bohlam Maksimumtage: 100W (Incandescent, CFL, LED)
- Basis Bohlam: E26 Sedang
- Metode Kontrol: Light Sensor (Dusk-to-Dawn) and Timed Off (2, 5, 8 hours)
- Pemakaian Dalam/Luar Ruangan: Dalam
- Dimensi (Perkiraan): Adds 2 inches to bulb height (Product Dimensions: 1.7 x 1.7 x 2.75 inches)
- Bahan: Polyethylene terephthalate (PET) plastic
Deskripsi Gambar: The back of the Westek SLC9BC product packaging, displaying key features and technical specifications in English, French, and Spanish. Specifications include compatibility with various bulb types, voltage, wat maksimumtage, dan materi.
Garansi dan Dukungan
Amertac provides a one-year limited express warranty to the original purchaser of this product under normal use and conditions. This warranty covers defects in materials and workmanship.
For detailed warranty information and support, please visit the official Westek weblokasi: www.westeklighting.com.
For customer service or technical assistance, refer to the contact information available on the Westek weblokasi.
