Perkenalan
Thank you for choosing the ErGear Dual Monitor Desk Mount. This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your new monitor mount. Please read this manual thoroughly before installation and keep it for future reference.
Informasi Keselamatan Penting
Please ensure all instructions are read and understood before assembly and use. If you have any questions, please contact customer service. Failure to follow these instructions may result in property damage, serious injury, or death.
- Verify that your monitor's weight and VESA pattern are within the specified limits.
- Do not exceed the maximum load capacity of 26.5 lbs per arm.
- Ensure the mounting surface (desk) is strong enough to support the combined weight of the mount and monitors.
- Use only the provided hardware.
- Jauhkan komponen-komponen kecil dari jangkauan anak-anak.
Spesifikasi
- Model: EGCM13B
- Kompatibilitas Ukuran Layar: 13 hingga 34 inci
- Weight Capacity (per arm): Hingga 26.5 lbs
- Kompatibilitas VESA: Ukuran 75x75 mm, 100x100 mm
- Arm Span: 33 inci
- Tinggi Tiang: 16.3 inci
- Tipe Gerakan: Tilt, Swivel, Rotation, Articulating
- Sudut Kemiringan Maksimum: 90 Derajat
- Bahan: Baja Paduan
- Warna: Hitam
- Tipe Pemasangan: Dudukan Meja (C-Cl)amp atau Grommet)
- C-Clamp Ketebalan Meja: 0.39" - 3.15"
- Grommet Mount Desk Thickness: 0.39" - 2.17"
- Diameter Lubang Grommet: 0.47" - 0.79"
Isi Paket
Please check that all parts are included and undamaged. If any parts are missing or damaged, please contact customer service.
- Tiang Utama dengan Pengait Mejaamp/Grommet Base
- Lengan Monitor Ganda
- Pelat VESA (2x)
- Perlengkapan Pemasangan (sekrup, ring, alat)
- Klip Manajemen Kabel
- Manual Instruksi
Pengaturan dan Instalasi
1. Desk Compatibility Check
Before installation, ensure your desk meets the following criteria:
- Bahan: Recommended for wooden tables.
- bawah: Preferably free of beams or panels that may interfere with installation.
- C-Clamp Ketebalan: 0.39" - 3.15"
- Grommet Mount Thickness: 0.39" - 2.17" (Hole Diameter: 0.47" - 0.79")
2. Monitor Compatibility Check
Each monitor must meet these conditions:
- Ukuran Layar: 13 hingga 34 inci
- Berat: Hingga 26.5 lbs
- Lubang Pemasangan VESA: 75x75 mm or 100x100 mm apart on the back of the monitor.
3. Assemble the Pole with Clamp Mendukung
Choose either C-Clamp or Grommet installation based on your desk type.
Follow the detailed steps in the provided video and diagrams to securely attach the main pole to your desk using either the C-Clamp or Grommet method. Ensure all screws are tightened appropriately for stability.
4. Assemble the Arm and Pole Wire Clips
Attach the monitor arms to the main pole. Loosen the screw on the pipe clamp before installing the arm, then tighten it securely. Ensure the VESA plate side of the arm faces upwards. Install the cable management clips along the arms and pole.
5. Assemble VESA Plate and Monitor
Attach the VESA plate to the back of your monitor using the appropriate screws and washers. Ensure it is securely fastened.
6. Install the Monitor to the Swivel Arm
Carefully slide the monitor (with the attached VESA plate) onto the swivel arm. Secure it by tightening the locking screw. Adjust the screw with the Allen key to adjust the height of the VESA panel as needed (clockwise to lower, counter-clockwise to raise).
Operasi dan Penyesuaian
The ErGear Dual Monitor Desk Mount offers versatile adjustments for optimal viewkenyamanan:
- Penyesuaian Ketinggian: Kendurkan clamp on the main pole to slide the arms up or down to your desired height. Re-tighten the clamp dengan aman.
- Memiringkan: Adjust the monitor's vertical angle by tilting it +/-45 degrees to reduce glare and eye strain.
- Memutar: Rotate the monitor horizontally +/-90 degrees for easy screen sharing or viewdari berbagai sudut.
- Rotasi: Putar monitor 360 derajat untuk beralih antara orientasi lanskap dan potret.
- Ekstensi/Retraksi Lengan: The articulating arms allow you to extend or retract your monitors closer or further from you. Adjust the tension screws on the arm joints as needed to hold the desired position.
Pemeliharaan
- Periksa semua sekrup dan sambungan secara berkala untuk memastikannya tetap kencang dan aman.
- Bersihkan dudukan dengan kain lembut,amp kain. Hindari pembersih abrasif.
- Do not disassemble the mount unless instructed to do so.
Penyelesaian Masalah
- Monitor tidak sejajar: Ensure the VESA plates are correctly aligned and tightened. Adjust the small bolts on the tilt head to fine-tune alignment.
- Monitors sag or do not hold position: Tighten the tension screws on the arm joints. Refer to the assembly instructions for specific locations.
- Dudukan terasa tidak stabil: Double-check that the C-Clamp or Grommet mount is securely fastened to the desk and all screws are fully tightened. Ensure your desk meets the thickness requirements.
Garansi dan Dukungan
For warranty information or technical support, please refer to the product packaging or contact ErGear customer service directly. Keep your purchase receipt as proof of purchase.
