1. Pendahuluan
Thank you for choosing the Braun Texstyle 7 Pro Steam Iron SI 7160 BL. This manual provides essential information for the safe and efficient use, maintenance, and troubleshooting of your new appliance. Please read these instructions carefully before first use and keep them for future reference.
2. Petunjuk Keselamatan
- Selalu pastikan voltage yang ditunjukkan pada pelat peringkat sesuai dengan volume listrik Andatage.
- Jangan merendam setrika, kabel listrik, atau steker ke dalam air atau cairan lainnya.
- Jangan pernah meninggalkan setrika tanpa pengawasan saat setrika dalam keadaan menyala atau terhubung ke listrik.
- Keep the iron out of reach of children and persons with reduced physical, sensory, or mental capabilities.
- Saat tidak digunakan, letakkan setrika di atas permukaan yang stabil dan tahan panas.
- Do not touch the hot soleplate. Always use the handle.
- Cabut steker setrika dari stopkontak sebelum mengisi air, mengosongkan, atau membersihkannya.
- Jika kabel suplai rusak, kabel tersebut harus diganti oleh produsen, agen servis, atau orang yang mempunyai kualifikasi serupa untuk menghindari bahaya.
- Only use tap water for filling the water tank. Do not use perfumed water, water from tumble dryers, or chemically descaled water.
3. Produk Lebihview
Familiarize yourself with the components of your Braun Texstyle 7 Pro Steam Iron.


Komponen Utama:
- Water Tank Inlet: For filling water.
- Semprotan Nosel: Untuk melembapkan lipatan yang membandel.
- Tombol Steam Shot: For an extra burst of steam.
- Tombol Semprot: To activate the spray function.
- Steam Regulator: To adjust steam output.
- Panggilan Suhu: To select the appropriate temperature for different fabrics.
- Lampu pilot: Menunjukkan status pemanasan.
- Freeglide 3D Soleplate: Unique curved soleplate for effortless gliding.
- Kabel Daya: Menghubungkan setrika ke stopkontak listrik.
4. Pengaturan
4.1 Membongkar
- Keluarkan setrika dan semua aksesorinya dari kemasan dengan hati-hati.
- Remove any protective films or stickers from the soleplate.
- Simpan kemasan untuk penyimpanan atau pengangkutan di masa mendatang.
4.2 Mengisi Tangki Air
- Pastikan setrika sudah dicabut dari stopkontak.
- Buka penutup saluran masuk tangki air.
- Hold the iron in a slightly tilted position and fill the water tank with tap water up to the 'MAX' mark. Do not overfill.
- Tutup penutup saluran masuk tangki air dengan rapat.
4.3 Persiapan Penggunaan Pertama
Before ironing clothes for the first time, it is recommended to iron an old piece of fabric to remove any manufacturing residues from the soleplate.
- Isi tangki air seperti dijelaskan di atas.
- Plug the iron into a suitable mains socket.
- Set the temperature dial to the maximum setting.
- Allow the iron to heat up until the pilot light turns off, indicating it has reached the set temperature.
- Iron an old cloth for a few minutes, using steam if desired.
5. Petunjuk Pengoperasian
5.1 Pemilihan Suhu
Always check the fabric care label before ironing. Sort clothes according to ironing temperature requirements.
- Suhu Rendah (•): Sintetis, Sutra
- Suhu Sedang (••): Wol
- Suhu Tinggi (•••): Katun, Linen
Turn the temperature dial to the desired setting. The pilot light will illuminate and turn off when the selected temperature is reached.
5.2 Menyetrika dengan Uap
Steam ironing is suitable for fabrics that can withstand high temperatures (•••). Ensure the water tank is filled.
- Set the temperature dial to the steam zone (•••).
- Once the pilot light indicates the iron is ready, adjust the steam regulator to the desired steam output.
- Iron your garments.
Tembakan Uap
For stubborn creases, press the steam shot button. Wait a few seconds between shots to allow the steam to regenerate.
Steam Vertikal
The vertical steam function allows you to remove creases from hanging garments, curtains, or drapes.
- Gantung pakaian di gantungan.
- Hold the iron vertically, close to the fabric, but not touching it.
- Press the steam shot button repeatedly to release bursts of steam.
5.3 Penyetrikaan Kering
For delicate fabrics or when steam is not desired:
- Ensure the water tank is empty or the steam regulator is set to '0' (no steam).
- Set the temperature dial to the appropriate setting for your fabric.
- Wait for the pilot light to indicate the iron is ready.
- Iron your garments without steam.
5.4 Fungsi Semprot
The spray function helps to moisten fabrics and ease out stubborn creases.
- Pastikan tangki air terisi.
- Press the spray button to release a fine mist of water onto the fabric.
6. Perawatan dan Pembersihan
6.1 Setelah Setiap Penggunaan
- Unplug the iron from the mains socket.
- Biarkan setrika menjadi dingin sepenuhnya.
- Kosongkan sisa air dari tangki.
6.2 Membersihkan Tapak Sol
- Untuk membersihkan alas setrika, usap dengan air.amp cloth and a non-abrasive cleaner once it has cooled down.
- Do not use abrasive scouring pads or chemical cleaners, as these can damage the soleplate.
- If synthetic fibers have melted onto the soleplate, gently remove them with a plastic scraper while the iron is still warm (but unplugged).
6.3 Kerak
Regular descaling helps maintain optimal steam performance, especially in hard water areas. Refer to the specific descaling instructions provided in a separate leaflet or on the manufacturer's website if available for your model. Generally, this involves filling the tank with a descaling solution or a water-vinegar mixture, heating the iron, and then flushing it out.
6.4 Penyimpanan
- Simpan setrika yang sudah dingin dalam posisi tegak untuk mencegah kerusakan pada alas setrika.
- Ensure the power cord is neatly wrapped around the cord storage area (if available) or secured to prevent tangling.
7. Penyelesaian masalah
| Masalah | Kemungkinan Penyebab | Larutan |
|---|---|---|
| Setrika tidak memanas. | Not plugged in; power outlet faulty; temperature dial set to 'OFF'. | Check power connection; try another outlet; set temperature dial to a fabric setting. |
| Tidak ada uap atau uap tidak mencukupi. | Water tank empty; temperature too low; steam regulator set to '0'. | Fill water tank; set temperature to steam zone (•••); adjust steam regulator. |
| Kebocoran air dari alas lantai. | Suhu terlalu rendah untuk menghasilkan uap; tangki air terlalu penuh. | Increase temperature to steam zone; do not overfill water tank. |
| Noda cokelat pada kain. | Impurities in water; soleplate dirty; iron needs descaling. | Use fresh tap water; clean soleplate; perform descaling procedure. |
8. Spesifikasi
- Model: SI 7160 BL
- Kekuatan: 3100 Watt
- Dimensi (P x L x T): Ukuran 16x13x17 cm
- Berat: 2 kg
- Tapak setrika: Freeglide 3D Technology
- Fitur: Vertical Steam, Steam Shot, Spray Function
- Internal Reference Number: 127403109
9. Garansi dan Dukungan
9.1 Garansi
This Braun Texstyle 7 Pro Steam Iron SI 7160 BL comes with a Garansi 2 tahun sejak tanggal pembelian, mencakup cacat produksi dan malfungsi dalam penggunaan normal. Harap simpan bukti pembelian Anda untuk klaim garansi.
9.2 Dukungan Pelanggan
For further assistance, spare parts, or service, please refer to the contact information provided on the Braun official website or your local authorized service center. Do not attempt to repair the appliance yourself.