1. Pendahuluan
This manual provides detailed instructions for the safe and efficient operation, installation, and maintenance of your VECYS Hot and Cold Water Cooler Dispenser. Please read this manual thoroughly before using the appliance and retain it for future reference.
Gambar 1.1: Depan view of the VECYS Hot and Cold Water Cooler Dispenser.
The VECYS water cooler dispenser is designed to provide instant access to both hot and cold water. It features a high-efficiency compressor for rapid cooling and heating, a child safety lock for hot water, and a durable 304 stainless steel inner water tank for water purity.
2. Informasi Keselamatan Penting
To reduce the risk of injury or property damage, always follow basic safety precautions when using electrical appliances. Read all instructions before using this dispenser.
- Keamanan Listrik: Ensure the dispenser is connected to a grounded electrical outlet with the correct voltage. Jangan gunakan kabel ekstensi.
- Kunci Pengaman Anak: The hot water spout is equipped with a child safety lock. Always engage this lock when not in use to prevent accidental burns.
- Penempatan: Letakkan dispenser di permukaan yang datar dan stabil, jauhkan dari sinar matahari langsung dan sumber panas. Pastikan ventilasi yang memadai di sekitar unit.
- Kualitas Air: Use only potable water. Do not operate the dispenser without a water bottle installed.
- Pemeliharaan: Cabut steker dispenser sebelum membersihkan atau melakukan perawatan apa pun.
Image 2.1: Key features of the water cooler, highlighting the child safety lock and ETL listing for safety.
3. Isi Paket
Verifikasi bahwa semua item ada dalam paket:
- VECYS Hot and Cold Water Cooler Dispenser Unit
- Nampan Tetes
- Instruksi Manual (dokumen ini)
4. Pengaturan dan Instalasi
Ikuti langkah-langkah berikut untuk menyiapkan dispenser air Anda:
- Membongkar: Keluarkan dispenser dari kemasannya dengan hati-hati.
- Penempatan: Place the dispenser upright on a level, stable surface. Ensure there is at least 4 inches of clearance from walls to allow for proper ventilation.
- Membersihkan: Wipe down the exterior of the dispenser and the drip tray with a soft, damp kain.
- Pasang Baki Penampung Tetesan: Slide the drip tray into its designated slot below the spouts.
- Isi Botol Air: Remove the cap from a 3 or 5-gallon water bottle. Carefully lift the bottle and place it onto the anti-dust mite water barrel seat on top of the dispenser. Ensure the bottle is seated firmly and water begins to flow into the dispenser's reservoirs.
- Persiapkan Sistem: Before plugging in, dispense water from both the hot and cold spouts until water flows continuously. This removes air from the system.
- Menyambungkan: Sambungkan kabel daya ke stopkontak listrik yang diarde.
- Aktifkan Pemanas/Pendingin: Locate the hot and cold power switches on the back of the unit. Turn them ON. The indicator lights on the front will illuminate.
Image 4.1: Dispenser dimensions and a view of the anti-dust mite water barrel seat for bottle placement.
5. Petunjuk Pengoperasian
Your VECYS water dispenser provides instant hot and cold water once properly set up and powered on.
5.1 Penyaluran Air Panas
- Place a cup under the red (hot water) spout.
- To dispense hot water, simultaneously press the child safety lock button and push down the hot water lever.
- Lepaskan tuas untuk menghentikan aliran.
5.2 Cold Water Dispensing
- Place a cup under the blue (cold water) spout.
- Push down the cold water lever to dispense cold water.
- Lepaskan tuas untuk menghentikan aliran.
Image 5.1: Details on hot water (195℉-203℉, 4L capacity) and cold water (42℉-50℉, 2L capacity).
Image 5.2: Visual representation of temperature settings for hot and cold water.
6. Pemeliharaan
Pembersihan dan perawatan rutin akan memastikan umur panjang dan kinerja optimal dispenser air Anda.
6.1 Membersihkan Bagian Luar
- Cabut alat dispenser dari stopkontak.
- Lap permukaan luar dengan lembut, damp kain. Jangan gunakan pembersih atau pelarut yang bersifat abrasif.
- Clean the drip tray and grill regularly. Remove the drip tray, empty any collected water, wash with mild soap and water, rinse thoroughly, and dry before reinserting.
6.2 Cleaning the Water Reservoirs (Descaling)
It is recommended to clean the internal reservoirs every 3-6 months to prevent mineral buildup.
- Cabut steker dispenser dan keluarkan botol air.
- Drain all water from both hot and cold spouts.
- Prepare a cleaning solution (e.g., a mixture of water and food-grade citric acid or white vinegar).
- Pour the cleaning solution into the top reservoir.
- Biarkan larutan tersebut didiamkan selama 15-30 menit.
- Drain the solution completely from both spouts.
- Rinse the reservoirs thoroughly by filling with clean water and draining several times until no cleaning solution odor remains.
- Reinstall a fresh water bottle and plug in the dispenser.
Image 6.1: Illustration of the internal food-grade 304 stainless steel hot and cold water tanks, designed for water purity.
7. Penyelesaian masalah
Lihat tabel di bawah untuk masalah umum dan solusinya.
| Masalah | Kemungkinan Penyebab | Larutan |
|---|---|---|
| Tidak ada pengeluaran air | Water bottle empty or not properly seated; airlock in system. | Replace water bottle; ensure bottle is seated correctly; prime the system by dispensing from both spouts. |
| Tidak ada air panas | Hot water switch is OFF; heating element malfunction. | Turn ON the hot water switch on the back; allow 15-20 minutes for heating. If issue persists, contact support. |
| Tidak ada air dingin | Cold water switch is OFF; cooling compressor malfunction. | Turn ON the cold water switch on the back; allow 30-60 minutes for cooling. If issue persists, contact support. |
| Air bocor | Water bottle cracked or improperly seated; drain plug loose. | Check water bottle for cracks and proper seating; ensure drain plug (if applicable) is secure. |
| Kebisingan yang tidak biasa | Compressor cycling (normal); unit not level; loose parts. | Ensure unit is on a level surface. If noise is excessive or continuous, contact support. |
8. Spesifikasi
Technical details for the VECYS Hot and Cold Water Cooler Dispenser Model BY557:
| Fitur | Detil |
|---|---|
| Nomor Model | OLEH557 |
| Warna | Hitam |
| Bahan | Plastic (exterior), 304 Stainless Steel (inner tanks) |
| Kapasitas | Compatible with 3 or 5 Gallon water bottles |
| Dimensi Produk (P x L x T) | 13" x 13" x 35" |
| Jenis Instalasi | Freestanding, Top-loading |
| Suhu Air Panas | 195℉ - 203℉ (90.5℃ - 95℃) |
| Suhu Air Dingin | 42℉ - 50℉ (5.5℃ - 10℃) |
| Sumber Daya | Listrik Kabel |
| Berat Barang | 26.9 pon |
| Pabrikan | AQUART |
Image 8.1: Illustration of the built-in refrigerating compressor, emphasizing fast cooling, low noise, and low energy consumption.
9. Garansi dan Dukungan
Your VECYS water cooler dispenser is backed by a Garansi 1 tahun sejak tanggal pembelian. Garansi ini mencakup cacat bahan dan pengerjaan dalam penggunaan normal.
For warranty claims, technical assistance, or any questions regarding your product, please contact VECYS customer service. Our after-sale service and technical team are available to respond to your inquiries.
Please have your model number (BY557) and purchase information ready when contacting support.
