Sunco Lighting 4ft LED Shop Light Instruction Manual

1. Informasi Keselamatan Penting

Please read and understand all instructions before installing or operating this fixture. Failure to follow these instructions may result in electric shock, fire, or other hazards that could cause personal injury or property damage.

• PERINGATAN: Risiko sengatan listrik. Putuskan aliran listrik pada sekering atau pemutus sirkuit sebelum pemasangan atau perawatan.
• PERINGATAN: Risk of fire. Keep combustible materials away from the lamp.
• This fixture is intended for indoor use only. Do not use in wet locations or where directly exposed to water.
• Pastikan volume pasokantage is compatible with the fixture's requirements (120V-277V).
• Semua sambungan kabel harus dibuat sesuai dengan kode kelistrikan lokal dan nasional. Jika Anda ragu tentang pemasangan kabel, konsultasikan dengan teknisi listrik yang berkualifikasi.
• Jangan mencoba memodifikasi atau membongkar perlengkapan ini. Tidak ada komponen di dalamnya yang dapat diperbaiki oleh pengguna.

2. Apa yang ada di dalam kotak

Verifikasi bahwa semua komponen tersedia sebelum memulai instalasi:

• LED Shop Light Fixture(s)
• Perangkat Keras Pemasangan (sekrup, jangkar)
• Linking Cables (1.5" and 8" for daisy-chaining)
• Kacang Kawat

3. Spesifikasi

The fixture features a durable build with an impact-resistant prismatic lens for wide and consistent light dispersion.

This image illustrates key features including impact resistance, the prismatic lens design, non-dimmable functionality, and the wide voltagkompatibilitas 120-277V.

4. Pengaturan dan Instalasi

Ikuti langkah-langkah ini untuk pemasangan yang benar. Pastikan daya listrik telah dimatikan sebelum memulai.

4.1. Siapkan untuk Instalasi

1. Matikan daya: Locate the circuit breaker controlling the installation area and turn off the power.
2. Remove Diffuser: Gently remove the prismatic diffuser from the lamp base to access the internal components.
3. Pilih Suhu Warna (CCT): Before mounting, locate the CCT switch inside the fixture. Select your desired color temperature (4000K, 5000K, or 6000K). This setting cannot be changed easily after installation.

This image shows the internal CCT switch, allowing selection between 4000K, 5000K, and 6000K before installation.

4.2. Memasang Perlengkapan

The fixture is designed for flush mounting to a ceiling or surface. It includes keyhole slots for easy installation.

1. Tandai Titik Pemasangan: Hold the fixture in the desired mounting location and mark the positions for the mounting screws. Ensure these align with a junction box or suitable support structure.
2. Pasang Perangkat Keras Pemasangan: Drill pilot holes if necessary and install the provided mounting screws, leaving a small gap for the fixture to slide onto.
3. Persiapan Pengkabelan: If connecting to a junction box, knock out the appropriate punch hole on the fixture's housing.

This diagram illustrates the three main steps for installation: securing the housing, connecting electrical wires, and attaching the light fixture.

4.3. Sambungan Listrik

1. Hubungkan Kabel: Using the provided wire nuts, connect the fixture's wires to the supply wires: Live (black) to Live, Neutral (white) to Neutral, and Ground (yellow/green) to Ground. Ensure all connections are secure.
2. Kabel Selip: Carefully tuck all wires and wire nuts into the junction box or fixture housing.

4.4. Linking Multiple Fixtures (Daisy Chain)

This fixture supports daisy-chaining to extend lighting coverage. Use the provided linking cables.

1. Connect Linking Cable: Insert one end of a linking cable into the designated port on the first fixture and the other end into the port on the next fixture.
2. Koneksi Aman: Ensure linking cables are securely connected and properly routed.

This image demonstrates how to daisy-chain multiple fixtures using the linking cables and highlights the knockout punch hole for electrical connections.

4.5. Langkah Terakhir

1. Reattach Diffuser: Align one end of the diffuser with the aluminum base and push it into place until it snaps securely.
2. Pulihkan Daya: Turn the circuit breaker back on to restore power to the fixture.

5. Petunjuk Pengoperasian

The Sunco Lighting LED Shop Light is designed for straightforward operation once installed.

5.1. Pemilihan Suhu Warna (CCT)

This fixture features a selectable color temperature (CCT) switch, allowing you to choose between 4000K (Cool White), 5000K (Daylight), and 6000K (Bright White) to suit your preference or application. The CCT switch is located inside the fixture and must be set during installation before the diffuser is reattached.

• 4000K: Provides a neutral white light, suitable for offices or general workspaces.
• 5000K: Offers a bright, crisp daylight-like illumination, ideal for tasks requiring high visibility.
• 6000K: Delivers a very bright, cool white light, often preferred for industrial settings or areas needing maximum brightness.

This image displays the internal components and wiring, emphasizing the high efficiency of the LED fixture operating within a 120-277V range.

5.2. Daya Hidup/Mati

The fixture is non-dimmable and operates via a standard wall switch connected to its power supply. Simply toggle the wall switch to turn the light on or off.

6. Pemeliharaan

The Sunco Lighting LED Shop Light requires minimal maintenance. Always ensure power is disconnected before performing any maintenance.

• Pembersihan: Bersihkan bagian luar perlengkapan dengan kain lembut, kering, atau sedikit kering.amp cloth. Do not use harsh chemicals or abrasive cleaners, as these can damage the finish or lens.
• Inspeksi: Periodically inspect the fixture for any signs of damage, loose wiring, or wear. If any issues are found, disconnect power and consult a qualified electrician.
• Tidak Perlu Penggantian Bohlam: This fixture uses integrated LEDs, meaning there are no bulbs to replace. The LEDs are designed for a long lifespan of 50,000 hours.

7. Penyelesaian masalah

If you experience issues with your LED Shop Light, refer to the following common troubleshooting steps:

• Lampu tidak menyala:
  • Periksa pemutus arus untuk memastikan listrik menyala.
  • Pastikan semua sambungan kabel terpasang dengan aman dan benar.
  • Ensure the wall switch is in the ON position.
• Cahaya berkedip:
  • Confirm the fixture is not connected to a dimmer switch, as it is non-dimmable.
  • Periksa sambungan kabel yang longgar.
  • Pastikan volume pasokantage stabil dan berada dalam rentang yang ditentukan.
• Suhu warna salah:
  • The CCT switch must be set before installation. If the diffuser is already installed, carefully remove it to access and adjust the switch.

If these steps do not resolve the issue, contact Sunco Lighting customer support for assistance.

8. Garansi dan Dukungan

Sunco Lighting menjamin kualitas produknya.

• Jaminan: This product is backed by a 3-Year Warranty. Please refer to the official Sunco Lighting webKunjungi situs web kami atau periksa dokumen pembelian Anda untuk detail dan ketentuan garansi selengkapnya.
• Dukungan Pelanggan: For technical assistance, troubleshooting, or warranty claims, please contact Sunco Lighting customer support.