Franke SMA-PO Smart 1.75 GPM Single Hole Pull Out Kitchen Faucet

1. Pendahuluan

Thank you for choosing the Franke SMA-PO Smart 1.75 GPM Single Hole Pull Out Kitchen Faucet. This manual provides essential information for the proper installation, operation, and maintenance of your new faucet. Please read these instructions thoroughly before beginning installation or use to ensure safe and efficient performance. Keep this manual for future reference.

2. Informasi Keselamatan

Selalu perhatikan tindakan pencegahan keselamatan berikut selama pemasangan dan penggunaan:

• Matikan pasokan air utama sebelum memulai pekerjaan pemasangan atau perbaikan apa pun.
• Kenakan alat pelindung diri yang sesuai, seperti kacamata pengaman dan sarung tangan.
• Pastikan semua sambungan aman untuk mencegah kebocoran.
• Jangan mengencangkan sambungan terlalu kencang, karena hal ini dapat merusak komponen.
• Jika Anda tidak yakin tentang bagian mana pun dari proses pemasangan, konsultasikan dengan tukang ledeng yang berkualifikasi.
• Keep children away from the work area and plumbing tools.

3. Isi Paket

Verify that all components are present before beginning installation. If any parts are missing or damaged, contact Franke customer support.

• Faucet body with single lever handle
• Pull-out spray head with hose
• Mounting hardware (washer, nut, mounting bracket)
• Jalur pasokan air panas dan dingin
• Berat untuk selang tarik keluar
• Petunjuk instalasi (manual ini)

Gambar 1: Franke SMA-PO Smart Kitchen Faucet and included components. Ensure all parts are accounted for before proceeding with installation.

4. Pengaturan & Instalasi

This faucet is designed for single-hole, deck-mounted installation. Follow these steps carefully:

1. Siapkan Area Instalasi: Turn off the hot and cold water supply valves under the sink. Clear the area around the faucet hole. Remove any existing faucet.
2. Pasang Badan Keran: Insert the faucet body into the single hole on your sink or countertop. Ensure the handle is positioned correctly.
3. Amankan Keran: From underneath the sink, slide the rubber washer, metal washer, and mounting nut onto the threaded shank of the faucet. Hand-tighten the nut, then use a basin wrench to fully secure it. Do not overtighten.
4. Hubungkan Saluran Pasokan Air: Attach the hot and cold water supply lines from the faucet to the corresponding hot and cold water supply valves. Use a wrench to tighten connections, but do not overtighten.
5. Pasang Selang Tarik Keluar: Connect the pull-out spray hose to the designated port on the faucet's underside. Ensure a secure connection.
6. Attach the Hose Weight: Clip the hose weight onto the pull-out hose at a point that allows the spray head to retract fully and smoothly.
7. Uji Kebocoran: Slowly turn on the hot and cold water supply valves. Check all connections for leaks. If leaks are present, tighten the connections slightly until they stop.
8. Siram keran: Remove the spray head and turn on the water to flush out any debris from the lines. Run water for approximately one minute. Reattach the spray head.

Gambar 2: General installation steps for a single-hole pull-out kitchen faucet. Refer to specific diagrams for detailed component placement.

5. Operasi

Your Franke SMA-PO faucet features a single lever handle, a pull-out spray head with two spray functions, and a swivel spout.

• Aliran dan Suhu Air: Pegangan tuas tunggal mengendalikan aliran air dan suhu.
  • Angkat gagang untuk meningkatkan aliran air.
  • Push the handle down to decrease or stop water flow.
  • Pindahkan pegangan ke kiri untuk air panas.
  • Pindahkan pegangan ke kanan untuk air dingin.
• Pull-Out Spray Head: Grasp the spray head and pull it out from the spout. The hose allows for extended reach within and around the sink.
• Fungsi Semprot: The spray head typically has buttons or a toggle to switch between two spray functions (e.g., aerated stream and powerful spray). Press the button to select your desired spray pattern.
• Cerat Putar: The faucet spout can swivel 110 degrees, providing flexibility and access to all areas of your sink.

Gambar 3: Illustrates the single lever handle for temperature and flow control, and the pull-out spray head with dual functions.

6. Pemeliharaan

Regular maintenance will help preserve the finish and functionality of your Franke faucet.

• Membersihkan Lapisan Akhir: Bersihkan lapisan krom yang dipoles dengan kain lembut,amp kain dan sabun lembut. Hindari pembersih abrasif, bahan kimia keras, atau sabut gosok, karena dapat merusak lapisan akhir. Bilas hingga bersih dan keringkan dengan kain lembut untuk mencegah noda air.
• Pembersihan Aerator: If water flow decreases, the aerator may be clogged. Unscrew the aerator from the spray head, rinse any debris, and reattach.
• Kartrid Cakram Keramik: The faucet uses a durable ceramic disc cartridge. If leaks occur from the handle or flow issues persist after aerator cleaning, the cartridge may need inspection or replacement. This typically requires professional assistance.
• Hose Weight: Ensure the hose weight is securely attached and does not interfere with the smooth retraction of the pull-out hose.

7. Penyelesaian masalah

Lihat tabel di bawah untuk masalah umum dan solusinya.

If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact Franke customer support.

8. Spesifikasi

9. Informasi Garansi

The Franke SMA-PO Smart Kitchen Faucet is covered under Franke's limited warranty. The faucet body, constructed of stainless steel, is included in this coverage. For specific terms, conditions, and duration of your warranty, please refer to the official warranty documentation provided with your purchase or visit the Franke official websitus. Simpan bukti pembelian Anda untuk klaim garansi.

10. Dukungan Pelanggan

If you have any questions, require technical assistance, or need to order replacement parts, please contact Franke customer support. You can typically find contact information on the Franke official webdi situs web atau pada kemasan produk Anda.

Please have your model number (SMA-PO-CHR) and date of purchase available when contacting support.