Perkenalan
Thank you for choosing the ErGear Electric Standing Desk. This manual provides comprehensive instructions for the assembly, operation, and maintenance of your new height-adjustable desk. Please read this manual carefully before assembly and use to ensure safe and efficient operation.
Image: The ErGear Electric Standing Desk, 44x24 inches, in vintage brown, set up with a laptop, monitor, and other office items. It features a control panel for height adjustment.
Informasi Keselamatan Penting
- Do not exceed the recommended maximum weight limit of 176 pounds to ensure stability and longevity of the desk.
- Ensure all cables are properly managed and have sufficient slack to avoid damage or disconnection during height adjustments.
- Jauhkan anak-anak dan hewan peliharaan dari meja selama pengoperasian untuk mencegah cedera.
- Hindari menaruh cairan langsung pada panel kontrol atau di dekat komponen listrik.
- Gunakan hanya adaptor daya dan komponen yang telah disediakan.
- Periksa semua sekrup dan sambungan secara berkala untuk memastikan semuanya tetap kencang.
Isi Paket
Before beginning assembly, please verify that all components are present and undamaged. Refer to the assembly video for a visual guide to the parts.
- Desktop (Two-piece)
- Kaki Meja (2)
- Side Plates (2)
- Batang Transmisi
- Panel Kontrol
- Adaptor Daya
- Klip Manajemen Kabel
- Pengait Headphone (2)
- All necessary screws and tools (Allen wrench, etc.)
Gambar: Sebuah ledakan view of the ErGear Electric Standing Desk components, including the two-piece desktop, leg frames, control panel, and various hardware, laid out on a white background.
Pengaturan dan Perakitan
Follow these steps to assemble your ErGear Electric Standing Desk. An average assembly time is approximately 30 minutes.
Step 1: Assemble the Desk Legs
- Attach the foot pads to the bottom of each leg.
- Connect the leg frames using the provided crossbar and screws. Ensure all screws are tightened securely.
Gambar: Close-up view of the desk leg assembly, showing screws being inserted to secure the leg components.
Step 2: Attach Side Plates and Transmission Rod
- Secure the side plates to the top of the assembled leg frames using the designated screws.
- Insert the transmission rod into the appropriate slots on the leg frames and motor assembly. Ensure it is fully engaged. If the desk legs are not the same height, insert the rod into the left leg and turn to adjust until they are level.
Image: The desk frame with the transmission rod correctly installed, connecting the two leg mechanisms.
Step 3: Assemble the Desktop and Other Parts
- Place the two-piece desktop upside down on a soft, clean surface.
- Align the desktop pieces and secure them together using the provided connectors and screws.
- Carefully place the assembled leg frame onto the desktop, aligning the screw holes.
- Attach the leg frame to the desktop using the provided screws.
- Install the control panel and headphone hooks to the underside of the desktop as indicated in the instructions.
Image: The underside of the desk, showing the control panel and cable management clips attached to the desktop.
Langkah 4: Hubungkan Kabel
- Connect the motor cable to the control box.
- Connect the control panel cable to the control box.
- Connect the power adapter to the control box and then to a power outlet.
- Use the provided cable management clips to organize all cables neatly.
For a visual step-by-step guide, please watch the official assembly video:
Video: Official ErGear Electric Standing Desk Assembly Video. This video demonstrates the complete assembly process for the EGESD4/5/6 models, including attaching legs, side plates, transmission rod, desktop, and connecting cables.
Petunjuk Pengoperasian
Your ErGear Electric Standing Desk features an intuitive control panel for easy height adjustment and memory presets.
Penyesuaian Ketinggian
- Menaikkan Meja: Tekan dan tahan tombol Up arrow (▲) tombol untuk menaikkan meja ke ketinggian yang Anda inginkan.
- Meja Bawah: Tekan dan tahan tombol Down arrow (▼) tombol untuk menurunkan meja ke ketinggian yang Anda inginkan.
- The desk height can be adjusted smoothly from 28.35 inches to 46.46 inches.
Image: A close-up of the ErGear desk control panel, showing the digital height display and the up/down arrow buttons for manual adjustment.
Preset Memori
The control panel allows you to save up to three preferred height settings for quick transitions.
- Untuk Menyimpan Preset: Adjust the desk to your desired height using the up/down arrows. Press the "S" button, then immediately press one of the number buttons ("1", "2", atau "3") untuk menyimpan ketinggian saat ini ke pengaturan awal tersebut.
- Untuk Menggunakan Preset: Simply press the corresponding number button ("1", "2", atau "3"). Meja akan otomatis bergerak ke ketinggian yang disimpan.
Observe the smooth operation of the desk's height adjustment:
Video: A user demonstrating the height adjustment feature of the ErGear Standing Desk. The desk smoothly moves up and down, showcasing the electric motor's functionality and the ease of using the control panel.
Pemeliharaan
- Pembersihan: Usap permukaan meja dengan kain lembut dan kering.amp kain. Hindari bahan kimia keras atau pembersih abrasif yang dapat merusak lapisan akhir.
- Inspeksi: Periksa semua sekrup dan sambungan secara berkala untuk memastikan semuanya kencang. Kencangkan kembali jika perlu.
- Manajemen Kabel: Ensure cables remain organized and free from entanglement to prevent damage during height adjustments.
- Perawatan Motorik: The motor is designed for long-term operation. Avoid overloading the desk beyond its maximum weight capacity.
Penyelesaian Masalah
| Masalah | Kemungkinan Penyebab | Larutan |
|---|---|---|
| Meja tidak bergerak. | Power cable disconnected; motor cable disconnected; overload. | Check all cable connections. Ensure desk is plugged into a working outlet. Reduce weight on the desk. |
| Meja bergerak tidak merata. | Transmission rod not properly engaged; uneven weight distribution. | Verify the transmission rod is fully inserted and adjusted. Distribute weight evenly on the desktop. |
| Desk makes unusual noises. | Loose screws; obstruction. | Check and tighten all assembly screws. Ensure no objects are obstructing the lifting mechanism. |
| Preset memori tidak berfungsi. | Preset tidak disimpan dengan benar. | Re-save your desired height settings by pressing "S" then the number button. |
Spesifikasi
- Merek: Peralatan Er
- Nomor Model: EGESD71V-US
- Desain Meja: Meja Berdiri Elektrik
- Bahan Desktop: Kayu Rekayasa (Laminasi)
- Bahan Dasar: Baja Paduan
- Warna: Anggurtage Coklat
- Ukuran: 44 x 24 inci
- Tinggi Minimum: 28.35 inci
- Tinggi Maksimum: 46.46 inci
- Ketebalan Meja: 0.75 inci
- Rekomendasi Berat Maksimal: 176 pon
- Perakitan yang Diperlukan: Ya (Direkomendasikan untuk 1 orang)
- UL Terdaftar: Ya
Informasi Garansi
ErGear products come with a limited warranty. For specific details regarding your product's warranty coverage, please refer to the documentation included with your purchase or visit the official ErGear weblokasi.
- Desktop and Desk Frame: perlindungan 5 tahun
- Motors and Electrical Components: perlindungan 2 tahun
Dukungan Pelanggan
If you encounter any issues or have questions regarding your ErGear Electric Standing Desk, please contact our customer support team for assistance.
- Dukungan online: Visit the official ErGear websitus untuk Tanya Jawab dan sumber daya dukungan.
- E-mail: Refer to your product packaging or the ErGear websitus untuk alamat email layanan pelanggan.
- Telepon: Refer to your product packaging or the ErGear websitus untuk nomor telepon layanan pelanggan.
