Perkenalan
This manual provides instructions for the Grundig Wireless LED Light Bar with Motion Detector. This smart LED lamp is designed for use in cabinets, closets, kitchen furniture, or any dark area requiring additional illumination. It features a sleek design and offers three operating modes: continuously on, off, and automatic motion detection.
Pengaturan dan Instalasi
Follow these steps to install your LED light bar:
- Mount the Metal Brackets: Select the desired location for the light bar. Mount the two metal brackets, ensuring a minimum spacing of 20 cm (approximately 7.9 inches) between them.
- Place the LED Lamp: Carefully place the LED light bar into the mounted metal brackets.
- Lampiran Aman: The integrated magnets within the light bar will securely hold it in place on the metal brackets.
Image: Grundig Wireless LED Light Bar with Motion Detector. The image shows the sleek, white LED light bar, highlighting its compact design suitable for under-cabinet installation.
Mode Operasi
The Grundig LED Light Bar offers three operating modes for versatile use:
- Modus AKTIF: Lampunya tetap menyala terus menerus.
- Mode MATI: Lampu dimatikan.
- AUTO (Motion Detection) Mode: The light automatically turns on when motion is detected and turns off after a period of inactivity. This mode is energy-efficient.
To switch between modes, locate the mode selection switch on the device and slide it to the desired setting.
Pemeliharaan
To ensure optimal performance and longevity of your Grundig LED Light Bar, follow these maintenance guidelines:
- Pembersihan: Wipe the surface of the light bar with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the finish.
- Pengisian daya: Recharge the light bar via its USB port when the battery is low. Ensure you use a compatible 5V DC, 1A power source.
- Penyimpanan: Jika menyimpan perangkat untuk jangka waktu yang lama, pastikan perangkat terisi penuh dan disimpan di tempat yang sejuk dan kering.
Penyelesaian Masalah
If you encounter issues with your LED light bar, refer to the following common solutions:
| Masalah | Kemungkinan Penyebab | Larutan |
|---|---|---|
| Lampu tidak menyala. | Baterai habis. | Recharge the light bar using the provided USB cable. |
| Motion sensor not working in AUTO mode. | Insufficient ambient light or sensor obstruction. | Ensure the sensor is not blocked and test in a darker environment. Verify the mode switch is set to AUTO. |
| Lampu berkedip atau redup. | Baterai lemah. | Recharge the light bar. |
Spesifikasi
| Merek | tanah |
| Nomor Model | 8711252574158 |
| Kekuatan | 1.5 Watt |
| Jil.tage | Tegangan DC 5 Volt |
| Saat ini | 1 Ampsebelum |
| Jumlah LED | 48 |
| Fluks Bercahaya | 85 lumen cahaya |
| Dimensi (P x L x T) | Ukuran 0.45x3.6x0.15 cm |
| Berat | 187 gram |
| Bahan | Logam |
| Warna | Putih |
| Fitur Khusus | Pendeteksi Gerakan |
| Sumber Daya | Bertenaga Baterai (Dapat Diisi Ulang dengan USB) |
| Jenis Instalasi | Pemasangan Permukaan |
| Penggunaan Khusus | Kitchen, Cabinet, Closet Lighting |
Garansi dan Dukungan
Information regarding specific warranty terms and customer support contact details is typically provided with the product packaging or on the manufacturer's official websitus ini. Silakan merujuk ke sumber-sumber tersebut untuk informasi yang paling akurat dan terkini.
For further assistance, please contact Grundig customer service.
