Globo Lighting BOSTON Outdoor Pedestal Light

1. Pendahuluan

Thank you for choosing the Globo Lighting BOSTON Outdoor Pedestal Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions carefully before installation and retain them for future reference.

Image 1.1: The BOSTON outdoor pedestal light providing illumination along a pathway.

2. Petunjuk Keselamatan

• Keamanan Listrik: Pemasangan harus dilakukan oleh teknisi listrik yang berkualifikasi sesuai dengan semua peraturan kelistrikan lokal dan nasional. Selalu putuskan aliran listrik pada pemutus sirkuit utama sebelum pemasangan, perawatan, atau penggantian bohlam.
• Penggunaan Luar Ruangan: This fixture is designed for outdoor use. Ensure all connections are waterproof and sealed appropriately to prevent water ingress.
• Tipe Bohlam: Use only E27 bulbs with the specified wattage. Jangan melebihi wat maksimumtage ditunjukkan pada perlengkapan.
• Penanganan: Tangani perlengkapan ini dengan hati-hati. Hindari menjatuhkannya atau membenturkannya dengan keras.
• Pembersihan: Jangan gunakan pembersih abrasif atau pelarut. Bersihkan dengan kain lembut dan halus.amp kain.
• Panas: Allow the bulb to cool completely before attempting to replace it.

3. Isi Paket

Harap periksa apakah semua komponen lengkap dan tidak rusak sebelum memulai pemasangan:

• 1x BOSTON Outdoor Pedestal Light Fixture (Model 105701)
• 1x Basis Pemasangan
• 1x Set of Mounting Hardware (screws, anchors)
• 1x Panduan Pengguna

Note: E27 bulb is not typically included and must be purchased separately.

4. Spesifikasi

5. Pengaturan dan Instalasi

Penting: Ensure the main power supply is switched off at the circuit breaker before commencing installation.

1. Pilih Lokasi: Select a suitable outdoor location for the pedestal light, ensuring it is on a stable, level surface and has access to the necessary electrical wiring.
2. Persiapan Pengkabelan: If not already present, run appropriate outdoor-rated electrical cable to the installation point. Consult a qualified electrician for this step.
3. Pasang Basis: Position the mounting base on the desired surface. Mark the drilling points through the holes in the base. Drill pilot holes and secure the base using the provided mounting hardware (screws and anchors). Ensure the base is firmly attached.
4. Hubungkan Kabel Listrik: Carefully connect the electrical wires from your power supply to the terminals inside the fixture. Follow the standard wiring color codes (e.g., Live, Neutral, Earth). Ensure all connections are secure and properly insulated.
5. Pasang Bohlam: Insert a suitable E27 bulb (not included) into the lamp pemegang. Jangan terlalu kencang.
6. Perlengkapan Aman: Attach the main body of the pedestal light to the mounted base, ensuring it is securely fastened and sealed against moisture.
7. Pulihkan Daya: Setelah instalasi selesai dan semua sambungan terpasang dengan aman, pulihkan daya pada pemutus sirkuit utama.

Image 5.1: The pedestal light installed on a patio, demonstrating a typical mounting scenario.

6. Petunjuk Pengoperasian

The BOSTON Pedestal Light features an integrated motion sensor for automatic operation.

• Nyalakan: Once installed and power is restored, the light will enter a warm-up period (typically a few seconds) before the motion sensor becomes active.
• Sensor Gerak: The integrated motion sensor detects movement within its detection range. When motion is detected, the light will illuminate.
• Pematian Otomatis: After a period of no detected motion, the light will automatically turn off. The duration of illumination is typically pre-set or adjustable via controls on the sensor (if available). Refer to the sensor's specific markings for adjustment options.
• Day/Night Sensor: The motion sensor also includes a photocell that prevents the light from activating during daylight hours, conserving energy. The light will only activate due to motion when ambient light levels are low enough.

Image 6.1: Detail of the motion sensor on the pedestal light, highlighting its detection area.

Image 6.2: The pedestal light operating at night, with the motion sensor detecting movement.

7. Pemeliharaan

• Pembersihan: Bersihkan perlengkapan secara teratur dengan lembut, damp cloth to remove dirt and debris. Do not use harsh chemicals or abrasive materials, as these can damage the finish or plastic components.
• Penggantian Bohlam:
  1. Ensure the power supply to the fixture is turned off at the circuit breaker.
  2. Biarkan bohlam lama mendingin sepenuhnya sebelum menyentuhnya.
  3. Carefully unscrew the top cover or access panel to reach the E27 bulb.
  4. Unscrew the old bulb and replace it with a new E27 bulb of the correct wattage.
  5. Securely reattach the cover or access panel, ensuring a watertight seal.
  6. Mengembalikan daya.
• Inspeksi: Periodically inspect the fixture for any signs of wear, damage, or loose connections. Address any issues promptly to ensure continued safe operation.

8. Penyelesaian masalah

If you experience persistent issues not covered here, please contact a qualified electrician or the product supplier.

9. Garansi dan Dukungan

This product is covered by the standard warranty provided by the manufacturer. Please retain your proof of purchase for any warranty claims. For technical support or further assistance, please contact your retailer or the Globo Lighting customer service department.

Informasi kontak biasanya dapat ditemukan pada kemasan produk atau situs web resmi produsen. weblokasi.