OLIGHT Arkfeld Ultra & IMINI 2 Flashlight Instruction Manual

1. Pendahuluan

This manual provides detailed instructions for the safe and effective use of your OLIGHT Arkfeld Ultra Flat Flashlight and IMINI 2 EDC Rechargeable Keychain Flashlight. Please read this manual thoroughly before operating the devices and retain it for future reference.

Image 1.1: The OLIGHT Arkfeld Ultra Flat Flashlight, showcasing its slim design and control interface.

Fitur Utama

• Arkfeld Ultra: Three-in-one functionality with 1400 lumens white light, 900 mW UV light, and a green beam (Class 3R, ≤5mW output).
• Constructed from O-aluminum for exceptional hardness and wear resistance.
• IMINI 2: Single output of 50 lumens.
• Instant activation by detaching the body from the magnetic cap.
• Integrated USB plug for convenient charging.

2. Pengaturan

2.1 Charging the Arkfeld Ultra

The Arkfeld Ultra features convenient magnetic charging. Connect the magnetic charging cable to the tail of the flashlight and a USB power source. The indicator light on the charger will show charging status.

Image 2.1: The Arkfeld Ultra connected to its magnetic charging cable, demonstrating both charging and hands-free use.

2.2 Charging the IMINI 2

The IMINI 2 has an integrated USB plug for charging. Simply detach the body from the magnetic cap to reveal the USB plug, then insert it into any standard USB port for charging. No separate cable is required.

Image 2.2: The IMINI 2 with its integrated USB plug inserted into a laptop's USB port for charging.

2.3 Operasi Awal

Ensure both flashlights are fully charged before first use to maximize battery life and performance.

3. Operasi

3.1 Arkfeld Ultra Functions

The Arkfeld Ultra features a central rotary switch to select between white light, UV light, and green beam modes. Press the central button to activate the selected light mode.

Image 3.1: The Arkfeld Ultra demonstrating its three light modes: 1400 lumens white light, green beam, and 900 mW UV light.

The device also includes a battery status indicator, typically located near the control interface, to show the remaining power level.

3.2 IMINI 2 Operation

To activate the IMINI 2, simply pull the flashlight body away from its magnetic cap. The light will turn on instantly. To turn it off, reattach the body to the magnetic cap.

Image 3.2: The IMINI 2 activating instantly when separated from its magnetic base, illustrating its ease of use.

Image 3.3: A close-up of the IMINI 2, showing the simple pull-apart mechanism for instant on/off functionality.

4. Pemeliharaan

4.1 Pembersihan

Regularly clean the exterior of both flashlights with a soft, damp cloth. Avoid using abrasive cleaners or solvents, as these can damage the finish. Ensure the charging contacts are clean and free of debris for optimal charging performance.

4.2 Penyimpanan

Store the flashlights in a cool, dry place away from direct sunlight and extreme temperatures. If storing for extended periods, ensure the batteries are partially charged (around 50%) to prolong their lifespan. Recharge every few months to prevent deep discharge.

5. Penyelesaian masalah

If your flashlight is not functioning as expected, please consider the following common issues:

• Lampu tidak menyala: Check battery level and ensure the device is charged. For IMINI 2, confirm the body is fully detached from the magnetic cap.
• Masalah pengisian daya: Ensure the charging cable (Arkfeld Ultra) or USB plug (IMINI 2) is properly connected and the power source is active. Clean charging contacts if necessary.
• Kecerahan berkurang: This may indicate a low battery. Recharge the device.

If problems persist, please contact OLIGHT customer support for further assistance.

6. Spesifikasi

7. Garansi dan Dukungan

For warranty information, product registration, or technical support, please visit the official OLIGHT websitus web atau hubungi layanan pelanggan mereka. Simpan struk pembelian Anda sebagai bukti pembelian.

Toko OLIGHT: Kunjungi Toko OLIGHT di Amazon