Informasi Keselamatan Penting
Please read and understand all instructions and safety warnings before assembly and use of this product. Failure to follow these instructions may result in injury or product damage.
- Do not attempt to lift or move the box spring when it is fully assembled.
- Selalu ikuti petunjuk perakitan dengan hati-hati untuk mencegah ketidakstabilan atau keruntuhan.
- Be cautious of sharp edges and the folding design during assembly and use.
- Regularly inspect the box spring for any signs of wear or damage.
- Jangan melebihi kapasitas berat maksimum 3500 lbs.
Isi Paket
Verifikasi bahwa semua komponen tersedia sebelum memulai perakitan.
- Box Spring Frame Components
- Kain penutup
- Manual Instalasi
- Sekrup
- Kunci
Pengaturan dan Perakitan
The MAF King Size Box Spring features a foldable design for easier setup. It is recommended that two adults assemble this product.
Alat yang dibutuhkan:
- Included Wrench
- (Optional) Power screwdriver for faster assembly
Langkah-langkah Perakitan:
- Bongkar Komponen: Carefully remove all parts from the packaging and lay them out on a clean, flat surface. Ensure all listed components are present.
- Buka Bingkai: The box spring frame comes in a folded configuration. Gently unfold the sections as shown in the diagram below. Ensure the triangular support designs lock into place.
- Koneksi Aman: Align the frame sections and secure them using the provided screws and wrench. Ensure all connections are tightened securely to prevent wobbling or noise.
- Pasang Bilah: Place the metal slats into their designated positions on the frame. The U-shaped groove design helps secure each pole and support frame.
- Terapkan Penutup Kain: Once the frame is fully assembled and stable, carefully place the removable fabric cover over the box spring. The cover is designed for easy application and removal.
Figure 1: Assembly Steps for the MAF Box Spring.
Figure 2: Foldable Design and Easy Assembly Overview.
Figure 3: Key Structural Features: Round Corners, Triangular Support, and U-Shaped Grooves.
Petunjuk Pengoperasian
The MAF Box Spring is designed to provide stable support for your mattress. It can be used with various mattress types, including innerspring, memory foam, and latex mattresses.
- Penempatan: Position the assembled box spring on a compatible bed frame or directly on the floor if desired. Ensure it is level and stable.
- Penempatan Kasur: Carefully place your mattress on top of the box spring. The box spring is designed to support mattresses up to 80"L x 76"W.
- Kapasitas Berat: The box spring is engineered to support up to 3500 lbs. Do not exceed this weight limit to maintain structural integrity and safety.
- Pengurangan Kebisingan: The U-shaped groove design and seamless welding are intended to prevent structural distortion and squeaks, providing a quiet sleeping environment.
Figure 4: Proper Layering of Bed Components.
Pemeliharaan dan Perawatan
Proper maintenance ensures the longevity and performance of your MAF Box Spring.
- Membersihkan Penutup: The fabric cover is removable and washable. Remove it from the frame for cleaning as needed. Follow care instructions on the cover label if available, or wash with mild detergent and cold water, then air dry.
- Pembersihan Bingkai: Lap rangka logam dengan kain kering untuk menghilangkan debu dan kotoran. Hindari penggunaan bahan kimia keras atau pembersih abrasif.
- Pemeriksaan Rutin: Periodically check all screws and connections to ensure they remain tight. Re-tighten if necessary. Inspect the frame for any signs of bending, cracks, or damage.
- Moving the Box Spring: If you need to move the box spring, it is recommended to disassemble it first, especially if moving through narrow doorways or stairs, to prevent damage to the product or injury.
Penyelesaian Masalah
If you encounter any issues with your MAF Box Spring, refer to the following common solutions:
| Masalah | Kemungkinan Penyebab | Larutan |
|---|---|---|
| Suara berderit | Sambungan longgar atau penempatan tidak rata. | Ensure all screws are tightly secured. Verify the box spring is placed on a flat, level surface. The U-shaped groove design is intended to minimize noise; if squeaking persists, re-check assembly. |
| Ketidakstabilan/Goyangan | Perakitan tidak lengkap atau komponen rusak. | Re-check all assembly steps, ensuring triangular supports are engaged and all fasteners are tight. Inspect for any bent or damaged parts. |
| Kasur Melengkung | Exceeded weight capacity or improper mattress support. | Ensure the combined weight of users and mattress does not exceed 3500 lbs. Verify the mattress is compatible with a box spring. |
Spesifikasi
| Fitur | Detil |
|---|---|
| Merek | Angkatan Udara |
| Nomor Model | MAF-MT33-10K |
| Ukuran | Raja |
| Dimensi Produk | 78.8"P x 75.5"L x 10"T |
| Ukuran Kasur yang Kompatibel | 80"P x 76"L |
| Fitur Khusus | Foldable Design, Round Corner Design, Triangular Support, U-Shaped Groove Design |
| Jenis Selesai | Dilapisi Serbuk |
| Komponen yang Termasuk | Box Spring Frame, Fabric Cover, Installation Manual, Screws, Wrench |
| Petunjuk Perawatan Produk | Wipe with Dry Cloth, Removable and Washable Fabric Cover |
| Perakitan Diperlukan | Ya |
| Jarak Tanah ke Barang | 10 inci |
| Berat Barang | 49.1 pon |
| Kapasitas Berat Maksimum | 3500 pon |
Figure 5: MAF Box Spring Size Chart.
Garansi dan Dukungan
Specific warranty details for the MAF Box Spring are not provided within this manual. For warranty information, please refer to the product packaging or contact MAF customer support directly.
For further assistance, questions, or to report any issues, please visit the official MAF store or contact their customer service department.
