GIGABYTE B760M AORUS Elite WIFI6E GEN5 Motherboard User Manual

Perkenalan

This manual provides detailed instructions for the installation, operation, and maintenance of your GIGABYTE B760M AORUS Elite WIFI6E GEN5 Motherboard. Please read this manual thoroughly before installing or using the product to ensure correct operation and to prevent damage.

Pengaturan dan Instalasi

Sebelum memulai pemasangan, pastikan sistem Anda dimatikan dan dicabut dari stopkontak. Kenakan gelang anti-statis untuk mencegah kerusakan akibat pelepasan muatan elektrostatik (ESD) pada komponen.

Tata Letak Motherboard

Familiarize yourself with the motherboard's layout and key components before proceeding with installation.

Gambar 1: Perintahkan ke bawah view of the GIGABYTE B760M AORUS Elite WIFI6E GEN5 Motherboard, showing the CPU socket, DIMM slots, PCIe slots, and M.2 slots.

Gambar 2: bersudut view of the motherboard, highlighting the VRM heatsinks and M.2 thermal guards.

CPU Installation (LGA 1700)

1. Temukan soket CPU LGA 1700 pada motherboard.
2. Tekan tuas pembuka dengan lembut ke bawah dan tarik ke samping untuk membuka penutup soket CPU.
3. Sejajarkan tanda segitiga pada CPU dengan tanda yang sesuai pada soket. Letakkan CPU ke dalam soket dengan hati-hati tanpa memaksanya.
4. Close the load plate and push the load lever back into its locked position. The socket cover will pop off automatically.
5. Pasang pendingin CPU sesuai dengan petunjuk pabrikannya.

Instalasi Memori (RAM)

This motherboard supports DDR5 memory modules. For optimal performance, install memory modules in the recommended slots for dual-channel configuration.

1. Buka klip di kedua ujung slot DIMM.
2. Sejajarkan takik pada modul memori DDR5 dengan kunci di slot DIMM.
3. Masukkan modul dengan kuat ke dalam slot hingga klip terkunci pada tempatnya. Pastikan kedua klip tertutup sepenuhnya.

Storage Device Installation (M.2 SSDs)

The motherboard features M.2 slots with EZ-Latch Plus for tool-less installation.

1. Locate the M.2 slots, typically covered by thermal guards.
2. Remove the M.2 thermal guard by unscrewing it (if applicable) or using the EZ-Latch mechanism.
3. Masukkan SSD M.2 ke dalam slot dengan sudut 30 derajat.
4. Push the M.2 SSD down and secure it using the EZ-Latch Plus mechanism or the provided screw.
5. Reinstall the M.2 thermal guard to ensure proper cooling.

Graphics Card Installation (PCIe)

The primary PCIe 5.0 x16 slot features EZ-Latch for easy removal.

1. Buka klip pengunci di ujung slot PCIe x16.
2. Align your graphics card with the slot and press it down firmly until it clicks into place. Ensure the retention clip is closed.
3. Amankan kartu grafis ke casing PC Anda dengan sekrup.

Connecting Peripherals and Power

• Konektor Daya: Hubungkan konektor daya utama ATX 24-pin dan konektor daya CPU 8-pin dari catu daya Anda ke motherboard.
• Konektor Panel Depan: Connect the power button, reset button, HDD LED, and front panel USB/audio headers to their respective pins on the motherboard. Refer to the motherboard diagram for exact locations.
• Perangkat SATA: Connect SATA data cables from your storage drives (HDDs/SSDs) to the SATA ports on the motherboard, and connect SATA power cables from your power supply to the drives.
• Panel I/O Belakang: Connect your monitor, keyboard, mouse, and other USB devices to the appropriate ports on the rear I/O panel.

Gambar 3: Rear I/O panel showing USB ports, Wi-Fi antenna connectors, HDMI, DisplayPort, 2.5GbE LAN, and audio jacks.

Pemasangan Antena Wi-Fi

The motherboard includes a Wi-Fi 6E module. Install the included antenna for wireless connectivity.

1. Locate the two antenna connectors on the rear I/O panel.
2. Screw the Wi-Fi antenna connectors onto the corresponding ports.
3. Position the antenna for optimal signal reception. The WIFI Compass feature can assist in finding the best orientation.

Petunjuk Pengoperasian

First Boot-Up and BIOS/UEFI Setup

1. Setelah merakit semua komponen, sambungkan monitor, keyboard, dan mouse Anda.
2. Colokkan kabel daya dan hidupkan catu daya.
3. Tekan tombol daya pada casing PC Anda.
4. Selama proses boot, tekan berulang kali tombol MENGHAPUS untuk masuk ke utilitas pengaturan BIOS/UEFI.
5. In the BIOS, you can configure system settings, boot order, and enable features like XMP for your DDR5 memory.

Instalasi Driver

After installing your operating system (Windows 10 or Windows 11), install the necessary drivers for optimal performance and functionality.

• Driver Chipset: Essential for motherboard functionality.
• Driver LAN: For 2.5GbE wired network connectivity.
• Wi-Fi Drivers: For Wi-Fi 6E wireless connectivity.
• Driver Audio: Untuk output dan input suara.
• Driver Grafis: Install drivers for your integrated or dedicated graphics card.

Driver dapat ditemukan di situs resmi GIGABYTE. websitus untuk model motherboard spesifik Anda.

XMP Profile Pengaktifan

To achieve the rated speed of your DDR5 memory (up to 5600MHz), you may need to enable the Extreme Memory Profile (XMP) in the BIOS.

1. Enter the BIOS setup utility during boot.
2. Navigate to the memory settings section (often under "Tweaker" or "Advanced Memory Settings").
3. Locate the XMP profile option and enable it. Select the desired profile if multiple are available.
4. Simpan perubahan dan keluar dari BIOS.

Pemeliharaan

Perawatan rutin membantu memastikan umur panjang dan pengoperasian yang stabil dari motherboard dan sistem Anda.

Pembersihan

• Periodically clean dust from inside your PC case, especially around fans, heatsinks, and motherboard components.
• Use compressed air to gently blow away dust. Hold fans to prevent them from spinning rapidly during cleaning.
• Pastikan sistem dimatikan dan dicabut sebelum membersihkan.

Pembaruan BIOS

GIGABYTE secara berkala merilis pembaruan BIOS untuk meningkatkan stabilitas, kompatibilitas, dan kinerja sistem. Periksa situs resmi GIGABYTE. website for the latest BIOS versions for your model.

• Download the correct BIOS file for your motherboard model.
• Follow the instructions provided by GIGABYTE for updating the BIOS, typically using a utility within the BIOS or a dedicated flashing tool.
• Peringatan: Do not interrupt the BIOS update process, as this can render your motherboard inoperable.

Pembaruan Pengemudi

Keep your system drivers updated to ensure optimal performance and compatibility with new software and hardware. Regularly check the GIGABYTE webSitus untuk driver terbaru.

Penyelesaian Masalah

Bagian ini memberikan solusi untuk masalah umum yang mungkin Anda temui.

Tidak Ada Daya / Tidak Bisa Booting

• Pastikan semua kabel daya (ATX 24-pin, CPU 8-pin) tersambung dengan aman ke motherboard dan catu daya.
• Verify that the power supply is switched on and plugged into a working outlet.
• Periksa sambungan panel depan (kepala tombol daya) untuk pemasangan yang benar.
• Coba boot dengan komponen minimal (CPU, satu stik RAM, kartu grafis jika tidak ada grafis terintegrasi) untuk mengisolasi masalahnya.

Tidak Ada Keluaran Tampilan

• Ensure your monitor is connected to the correct display output (either motherboard's integrated graphics port or dedicated graphics card port).
• Verify that the graphics card is properly seated in its PCIe slot and has all necessary power cables connected.
• Jika memungkinkan, coba uji dengan monitor atau kabel layar yang berbeda.

Ketidakstabilan Sistem / Kerusakan

• Periksa suhu CPU dan GPU untuk memastikan keduanya berada dalam batas pengoperasian yang aman.
• Verify that RAM modules are correctly installed and consider running a memory diagnostic tool.
• Pastikan semua driver sudah diperbarui.
• If XMP is enabled, try disabling it to see if memory stability improves.

BIOS Reset (Clear CMOS)

If you encounter issues after changing BIOS settings, you can reset the BIOS to its default settings.

1. Power off your system and unplug the power cord.
2. Locate the "Clear CMOS" jumper or button on the motherboard (refer to the motherboard diagram).
3. For a jumper, move the jumper cap from pins 1-2 to 2-3 for 5-10 seconds, then move it back to 1-2. For a button, press and hold it for 5-10 seconds.
4. Alternatively, remove the CMOS battery (CR2032) for 1-2 minutes, then reinsert it.
5. Colokkan kabel daya dan hidupkan sistem.

Spesifikasi

Garansi dan Dukungan

Untuk informasi garansi lebih rinci, silakan merujuk pada kartu garansi yang disertakan dengan produk Anda atau kunjungi situs web resmi GIGABYTE webSitus GIGABYTE menyediakan dukungan teknis dan sumber daya untuk produk mereka.

• Dukungan online: Visit the GIGABYTE support website for FAQs, driver downloads, BIOS updates, and troubleshooting guides.
• Hubungi Dukungan: Refer to the GIGABYTE website for contact information for technical assistance.

Selalu pastikan Anda menyiapkan nomor model produk dan nomor seri saat menghubungi dukungan pelanggan.