Perkenalan
Thank you for choosing the Baseus EH10 Adaptive Active Noise Cancelling Headphones. This manual provides essential information for setting up, operating, and maintaining your headphones to ensure optimal performance and longevity. Please read this manual thoroughly before using the product.
Apa yang ada di dalam kotak
The Baseus EH10 package includes the following items:
- Baseus EH10 NC Headphones
- Kabel Data USB-C
- Panduan Pengguna
Image: Contents of the Baseus EH10 headphone box.
Produk Selesaiview
Familiarize yourself with the physical components and controls of your Baseus EH10 headphones.
Komponen headphone
Gambar: Keseluruhan view of the Baseus EH10 headphones.
Kontrol dan Port
The headphones feature intuitive buttons and ports for easy operation:
- Tombol Daya: For turning the headphones on/off, playing/pausing music, and managing calls.
- Tombol Volume Naik / Turun: Untuk mengatur volume audio.
- Tombol ANC: To cycle through Active Noise Cancellation modes.
- Port USB-C: Untuk mengisi daya headphone.
- Jack Audio 3.5mm: Untuk koneksi audio kabel.
Gambar: Detail view dari kontrol headphone.
Pengaturan
Daya Hidup/Mati
- Nyalakan: Press and hold the power button for 2 seconds until the indicator light shows a solid blue light for 1 second.
- Matikan: Press and hold the power button for 4 seconds until the indicator light flashes red once and turns off.
Pairing Bluetooth
To connect your Baseus EH10 headphones to a device:
- Pastikan headphone dimatikan.
- Press and hold the power button for 4 seconds to enter pairing mode. The indicator light will flash red and blue alternately.
- Pada perangkat Anda (ponsel pintar, tablet, komputer), aktifkan Bluetooth dan cari perangkat yang tersedia.
- Select "Baseus EH10 NC" from the list of devices to connect.
- Setelah terhubung, lampu indikator akan menyala biru terang atau mati, tergantung modelnya.
Video: Demonstrates generic headphone pairing. Note: This video is a general guide and may not feature the exact Baseus EH10 model.
Sambungan Ulang Otomatis
After the initial pairing, the headphones will automatically reconnect to the last paired device when powered on again, provided the device's Bluetooth is active and within range.
Switching Devices / Forced Pairing
To disconnect from the current device and enter pairing mode for a new device, press and hold both the Volume "+" and Volume "-" buttons for 5 seconds. The indicator light will flash red and blue three times, indicating the headphones have disconnected and re-entered pairing mode.
Petunjuk Pengoperasian
Kontrol Musik
- Putar/Jeda: Single-click the Power button.
- Lagu Berikutnya: Tekan dan tahan tombol Volume Naik selama 1 detik.
- Lagu Sebelumnya: Press and hold the Volume Down button for 1 second.
- Volume Naik: Single-click the Volume Up button.
- Volume Turun: Single-click the Volume Down button.
Kontrol Panggilan
- Menjawab/Mengakhiri Panggilan: Single-click the Power button.
- Tolak Panggilan: Tekan dan tahan tombol Daya selama 1 detik.
Mode Peredam Kebisingan Aktif (ANC)
The Baseus EH10 features adaptive ANC technology. Use the dedicated ANC button to switch between modes:
- ANC Aktif: Reduces background noise by up to -45dB.
- Mode Transparansi: Memungkinkan Anda mendengar lingkungan sekitar sambil mendengarkan audio.
- ANC Mati: Menonaktifkan peredam kebisingan.
Image: Illustration of the -45dB Adaptive ANC feature.
Asisten Suara
Triple-click the Power button to activate or deactivate your device's voice assistant (e.g., Siri, Google Assistant).
Low-Latency Mode (Gaming/Movie Mode)
Double-click the ANC button to toggle Movie Mode on/off. Double-click the Power button to toggle Game Mode on/off. These modes optimize audio for reduced latency during gaming or video playback.
Video: Demonstrates generic smart button controls for music, calls, and modes. Note: This video is a general guide and may not feature the exact Baseus EH10 model.
Pengisian daya
The Baseus EH10 headphones offer extended playtime and fast charging capabilities:
- Daya Tahan Baterai: Hingga 80 jam dengan ANC dimatikan, dan 55 jam dengan ANC dihidupkan.
- Pengisian Cepat: Pengisian daya selama 10 menit memberikan waktu bermain sekitar 10 jam.
To charge your headphones, connect the provided USB-C cable to the charging port on the headphones and a compatible USB power source.
Image: Baseus EH10 headphones showcasing week-long playtime.
Spesifikasi
| Fitur | Detil |
|---|---|
| Nama Model | EH10 NC |
| Merek | Dasar |
| Warna | Hitam |
| Teknologi Konektivitas | Nirkabel (Bluetooth) |
| Teknologi Komunikasi Nirkabel | Bahasa Indonesia: Bluetooth |
| Kontrol Kebisingan | Peredam Kebisingan Adaptif |
| Faktor Bentuk Headphone | Di Atas Telinga |
| Penempatan Telinga | Di Atas Telinga |
| Impedansi | Tegangan 32 ohm |
| Metode Kontrol | Tombol |
| Waktu Pengisian Daya | 10 menit (untuk waktu bermain 10 jam) |
| Penggunaan Khusus Untuk Produk | Travel, Work, Daily Life |
| Perangkat yang Kompatibel | Phones, Tablets, Desktop Computers, Laptops, Mobile Phones, Smart Speakers |
| Dimensi Barang | 29 x 22 x 6 cm; 410 gram |
| Negara Asal | Cina |
Pemeliharaan
To ensure the longevity and optimal performance of your Baseus EH10 headphones, follow these maintenance guidelines:
- Pembersihan: Gunakan kain lembut dan kering untuk membersihkan headphone. Hindari penggunaan bahan kimia keras atau bahan abrasif.
- Penyimpanan: Simpan headphone di tempat sejuk dan kering, jauhkan dari sinar matahari langsung dan suhu ekstrem.
- Hindari Kelembaban: Jangan biarkan headphone terkena air atau kelembapan berlebihan.
- Tangani dengan hati-hati: Hindari menjatuhkan atau membiarkan headphone terkena benturan keras.
Image: Baseus EH10 headphones designed for cloud-like comfort.
Penyelesaian Masalah
If you encounter any issues with your Baseus EH10 headphones, refer to the following common solutions:
- Tidak Ada Daya: Pastikan headphone terisi penuh.
- Tidak Dapat Dipasangkan: Make sure the headphones are in pairing mode (indicator light flashing red and blue). Turn off and on your device's Bluetooth. Try clearing previous pairings on your device.
- Tidak ada suara: Check the volume levels on both the headphones and your connected device. Ensure the headphones are properly connected via Bluetooth or the 3.5mm audio cable.
- Kualitas Suara Buruk: Pastikan tidak ada penghalang antara headphone dan perangkat Anda. Mendekatlah ke perangkat Anda untuk menghindari gangguan. Periksa apakah kualitas sumber audio sudah baik.
- ANC Tidak Berfungsi: Ensure the ANC mode is activated.
Reset Pabrik
If issues persist, you can perform a factory reset:
- Press and hold both the Volume "+" and Volume "-" buttons for 10 seconds.
- The LED indicator will blink 3 times once the reset is complete.
Garansi dan Dukungan
Untuk informasi garansi dan dukungan pelanggan, silakan lihat kartu garansi yang disertakan dalam kemasan produk Anda atau kunjungi situs resmi Baseus. websitus. Simpan struk pembelian Anda sebagai bukti pembelian untuk klaim garansi.
