Dukungan Integrasi Otomatis Pulse Pro
OTOMATISKAN PULSA PRO SELESAIVIEW
Tingkatkan pengalaman Automate Anda dengan mengintegrasikan tirai bermotor Automate secara mulus ke dalam sistem kontrol ELAN Smart Home. Automate Pulse PRO menawarkan integrasi yang kuat dengan kontrol tirai yang terpisah dan komunikasi dua arah, yang memberikan pembaruan waktu nyata tentang posisi tirai dan tingkat baterai. Dilengkapi konektivitas nirkabel Ethernet (CAT 5) dan 2.4GHz, Pulse PRO memastikan integrasi otomatisasi rumah yang lancar melalui port RJ45 yang mudah diakses yang terletak di bagian belakang hub. Setiap hub mendukung hingga 30 tirai, menjadikannya solusi serbaguna untuk pengaturan otomatisasi rumah apa pun.
LEBIHVIEW
| Pabrikan: | Rollease Acmeda |
| Nomor Model: | Automate Pulse PRO |
| Versi Modul Inti: | 8.3 |
| Pengembang Pengemudi: | lampiran4 |
| Tanggal Revisi Dokumen: | 1/24/2025 |
LEBIHVIEW & SUPPORTED FEATURES
This driver is a Lighting Interface Controller for the Rollease Acmeda Automate Pulse PRO. It allows IP control over Rollease shades from ELAN.
THE FOLLOWING OPTIONS ARE SUPPORTED BY THIS DRIVER:
- Dimmer, Shade, and Louvre lighting devices.
- Realtime feedback of shade positions updated to ELAN Core.
- Open, and Ramp Up commands.
- Close, and Ramp Down commands.
- Stop to halt the movement of rotation or positioning.
- Rotation accurate to 1.8% increments.
- Position accurate to 1% increments.
- Fitur apa pun yang tidak secara khusus disebutkan sebagai didukung harus dianggap tidak didukung.
AUTOMATE PULSE PRO HUB CONFIGURATION
The hub will need to be installed and configured with the Automate Pulse application. All shades should be configured with the Automate Pulse application before starting the installation of the ELAN driver. Please refer to the Automate Pulse application for step by step instructions on how to add shades to your hub.
KONFIGURASI
As with all third-party drivers these do not reside in the typical listing of drivers from ELAN. To add this driver to an ELAN system:
- Download the. EDRVC file associated with this document if you do not already have it.
- Place the. EDRVC file di suatu lokasi di komputer Anda.
- We recommend \User\<User>\Documents\Elan\Drivers.
- In the g! Configurators navigate to the Lighting Interfaces item under Lighting.
- Navigate to the location you saved the. EDRVC file to and select it.
- Select “Rollease Acmeda Automate v2” from the list and click “OK”.
- A prompt will appear saying there will be no support from ELAN, click “OK”.
- The driver should now be visible under the Lighting Interfaces header.
INSTALATION PROCESS
It is recommended that you follow the below installation process in order to proper functionality with the driver.
- Select the Interface Type you want to use in Elan to control the shades.
- You can do this by setting the configuration option “Interface Type” to “Dimmer”, “Shade”, or “Both”.
- Enter the IP address of the Automate Pulse PRO Hub in the “IP Address” field.
- Click “Discover Devices” at the bottom of the lighting interface window.
- Please wait a few seconds for the driver to find all the shades on the hub.
- At this point your shades should be created under the lighting interface.
- [Optional] If you want to control the rotation of the shade you can add a Louvre device
- [Optional] If you want to control the rotation of the shade you can add a Louvre device
- Select Lighting Devices (None) or any of the shades that have been created.
- Select “Add New Device”.
- Select “Louvre Tilt”.
- Enter the Address of the shade in the “Shade Address” configuration line of the new device.
- Enter “LOUVRE” (without quotes) into the Device Type field.
- Bind the devices to user interface components in the custom pages.
DETAIL KONFIGURASI
Tabel berikut menyediakan pengaturan yang digunakan dalam Configurator. Dalam tabel di bawah ini:
- “<User Defined>”, etc. Type in the desired name for the item.
- “<Auto Detect>”, etc. The system will auto detect this variable.
- “<System>”, etc. The setting has been automatically set by the system. o “<Select>” A dropdown with a list of options.
|
Perangkat |
Variabel Nama | Pengaturan | Komentar |
| Antarmuka Pencahayaan | Nama | <User Defined> | Default “Rollease Acmed a Automate v2” |
| Sistem # | Ditentukan oleh sistem untuk mengidentifikasi perangkat | ||
| Status Color Coding | Diaktifkan atau Dinonaktifkan | ||
| Status | Keadaan pengemudi, dimana hijau berarti baik dan merah berarti ada masalah instalasi. | ||
| Versi Driver | Versi drivernya | ||
| Penjual Pengemudi | Lampiran 4 | ||
| Terpasang | Tanggal dan waktu driver diinstal | ||
| Jenis Perangkat | Label yang mengidentifikasi jenis perangkat driver tersebut | ||
| Nuansa | Daftar warna yang ditemukan oleh pengemudi | ||
| Mode Debug | Pilih verbositas entri yang akan muncul di Log Pengemudi | ||
| Jenis Antarmuka | Pilih jenis perangkat yang akan dibuat saat penemuan terjadi | ||
| Alamat IP | <User Defined> | The IP address of the Pulse PRO Hub | |
| Pelabuhan | <User Defined> | Defaults to 1487, this should not be changed unless the Hub itself has changed its IP address | |
| Perangkat Ringan | Nama | <User Defined> | Nama perangkat |
| Lokasi | Lokasi perangkat dalam proyek | ||
| Sistem # | Ditentukan oleh sistem untuk mengidentifikasi perangkat | ||
| Jenis Perangkat | Jenis perangkat | ||
| Hide Device from Scheduler | |||
| Alamat Bayangan | <User Defined> | The address of the shade to control | |
| Jenis | <User Defined> | SHADE, DIMMER, or LOUVER. |
KESALAHAN UMUM
- Memasukkan alamat IP yang salah di baris konfigurasi “Alamat IP”.
- If you’re failing to discover devices double check this!
ELAN CONTROL SYSTEM CONNECTION
Untuk bantuan lebih lanjut, hubungi pengecer Anda, kunjungi kami websitus di www.rolleaseacmeda.com.
SUMBER DUKUNGAN:
rolleaseacmeda.com
0 2025 Rollease Acmeda Group
PERTANYAAN YANG SERING DIAJUKAN
No Pulse PRO detected.
Pastikan Automate Pulse PRO Anda ditetapkan ke jaringan yang benar dan dapatkan Alamat IP yang tersedia dan masih berkomunikasi dengan jaringan menggunakan Aplikasi Automate Shades.
Batasan naungan tidak diatur dengan benar.
Calibrate shade limits with your Rollease Acmeda remote before setting the appropriate open and close time within ELAN SYSTEM.
Shade tidak bergerak sama sekali.
Make sure the selected Pulse PRO Hub is the correct Pulse PRO Hub for the shade to be controlled. Confirm the correct bindings are set in the ELAN System connections tab between the Pulse PRO Hub and Shade drivers.
I have multiple Pulse PRO’s, what do I do?
Load two Automate Pulse PRO Hub drivers. After selecting “Retrieve Hubs” located in the driver actions tab, you will see different Automate Pulse PRO Hubs- select the desired one.
Saya tidak melihat adanya ikatan bayangan pada driver Pulse PRO Hub?
Pilih “Retrieve Shades” yang ada di tab tindakan pengemudi.
How do I scan for available Automate Pulse PRO?
Once the Automate Pulse PRO Hub is properly connected via the Ethernet cable or Wireless network, navigate to the Automate Pulse PRO Hub Properties page within Composer. Select “Retrieve Hubs” located in the driver actions tab.
We get unexpected responses from the ELAN system, or “?” symbols
Ensure that all connections using the ethernet port or Wi-Fi are working properly. The missed connection has been known to yield unwanted or unexpected results.
Dokumen / Sumber Daya
 |
Dukungan Integrasi AUTOMATE Pulse Pro [Bahasa Indonesia:] Panduan Pengguna 8.3, lampiran4, Dukungan Integrasi Automate Pulse Pro, Automate Pulse Pro, Dukungan Integrasi, Dukungan |