DELL Command Configure Software User Manual

Catatan, peringatan dan peringatan

CATATAN: CATATAN menunjukkan informasi penting yang membantu Anda memanfaatkan produk dengan lebih baik.

PERHATIAN: PERHATIAN menunjukkan potensi kerusakan pada perangkat keras atau kehilangan data dan memberi tahu Anda cara menghindari masalah tersebut.

PERINGATAN: PERINGATAN menunjukkan potensi kerusakan properti, cedera pribadi, atau kematian.

© 2025 Dell Inc. atau anak perusahaannya. Semua hak dilindungi undang-undang. Dell Technologies, Dell, dan merek dagang lainnya adalah merek dagang Dell Inc. atau anak perusahaannya. Merek dagang lainnya mungkin merupakan merek dagang dari pemiliknya masing-masing.

Introduction to Dell Command | Configure

Dell Command | Configure is a software package that provides BIOS configuration capability for Dell client systems. IT administrators can use this tool to configure BIOS settings and create BIOS packages using the Dell Command | Configure User Interface (UI) or Command-Line Interface (CLI).

CATATAN: Dell Command | Configure replaces Dell Client Configuration Toolkit version 2.2.1.

• Perintah Dell | Konfigurasi 4.10.1 atau lebih baru menghasilkan SCE 64-bit dengan kendala.
• Dell Command | Configure 4.10.1 or later on a 64–bit ARM client machine, generates an ARM-based 64–bit SCE.

For more information, see the Dell Command | Configure 5.x User’s Guide on the Support | Dell site.

Topik:

• Versi
• Target audiens
• Tujuan dokumen

Versi

Bab ini memberikan gambaran umumview of the Dell Command | Configure version history, including release dates, supported operating systems, and compatible platform architectures to help you identify which version aligns with your system requirements.

Dell Command | Configure supports the following Windows operating systems:

• Jendela 11
• Jendela 10
• Lingkungan Pra-Instalasi Windows (Windows PE)

The following table lists the available Dell Command | Configure versions along with their release dates, supported operating systems, and platform compatibility.

Tabel 1. Matriks versi

CATATAN: Starting from the Dell Command | Configure 5.1.0 release, support for 32-bit systems has been discontinued.

Target audiens

The installation guide for Dell Command | Configure is intended for IT professionals and system administrators. It offers comprehensive instructions for configuring BIOS settings and creating BIOS packages using both the Dell Command Configure User Interface (UI) and Command-Line Interface (CLI).

Tujuan dokumen

This document provides instructions for installing and configuring BIOS settings and creates BIOS packages using the Dell Command | Configure User Interface (UI) or Command-Line Interface (CLI) for efficient BIOS management.

Mengakses Perintah Dell | Konfigurasikan penginstal

Perintah Dell | Konfigurasikan instalasi file is available as a Dell Update Package (DUP) at Support | Dell. Follow these steps to download the DUP:

1. Buka Dukungan | Dell.
2. Di bawah Produk apa yang bisa kami bantu, masukkan Melayani Tag perangkat Dell Anda yang didukung dan klik Kirim, atau klik Deteksi komputer pribadi.
3. Di halaman Dukungan Produk untuk perangkat Dell Anda, klik Driver & Unduhan.
4. Klik Temukan driver khusus secara manual untuk Anda [model].
5. Memeriksa Manajemen Sistem kotak centang di bawah Kategori tarik-turun.
6. Menemukan Perintah Dell | Konfigurasikan in list and select Unduh di sisi kanan halaman.
7. Temukan unduhannya file di komputer Anda (di Google Chrome, file file muncul di bagian bawah jendela Chrome), dan jalankan file yang dapat dieksekusi file.
8. Ikuti petunjuk di layar.

Dell Command | Configure for Windows

This section provides details about the supported Windows versions and Dell platforms, and explains how to install and uninstall Dell Command | Configure on Windows systems.

Topik:

• Sistem operasi yang didukung untuk Windows
  
• Platform yang didukung
  
• Installing Dell Command | Configure on Windows systems
• Uninstalling Dell Command | Configure from Windows systems
• Upgrading Dell Command | Configure on Windows systems

Sistem operasi yang didukung untuk Windows

Tabel 2. Sistem operasi yang didukung

Platform yang didukung

Table 3. Supported platforms

Table 3. Supported platforms (continued)

CATATAN: Platforms must support WMI-ACPI BIOS for full functionality.

CATATAN: For systems with non-WMI-ACPI compliant BIOS, functionality is limited. For more information, see Dell Command | Configure Version 5.x User’s Guide at Support | Dell

Installing Dell Command | Configure on Windows systems

You can install Dell Command | Configure on Windows systems using either the Dell Update Package (DUP) or the MSI installer.
Both installers support standard and silent (unattended) installation modes.

CATATAN: Microsoft .NET 4.8.1 or later must be installed on the client system to install Dell Command | Configure using the user interface.

CATATAN: If User Account Control (UAC) is enabled on a Windows 10 system, silent mode installation is not allowed. Ensure that you have administrative privileges before installing Dell Command | Configure in silent mode.

Prasyarat

Before installing Dell Command | Configure, ensure the following:

• A supported Windows operating system is installed and running.
• Dell Command | Configure installation file is available (downloadable from Support | Dell).
• Administrator privileges are available on the system.
• Microsoft .NET 4.8.1 (for UI) and .NET 8.0 SDK (for Dell Command Secure BIOS Configuration Server) are installed.
• Microsoft Visual C++ Redistributable for Visual Studio 2022 is installed.
• WMI-ACPI compliant BIOS is available for full functionality.

CATATAN:

• The system must be connected to a stable network when installing Dell Command | Configure with support for Dell Command Secure BIOS Configuration.
• On Windows 10 or later, enable Microsoft .NET Framework 4.8 or later version from the Mengaktifkan atau menonaktifkan fitur Windows layar.
• The system has limited functionality if it does not have a WMI-ACPI compliant BIOS. Update the BIOS with a compatible version, if available. For more information, see Windows SMM Security Mitigations Table (WSMT) Compliance section in the Dell Command | Configure User’s Guide at Support | Dell.

Install Dell Command | Configure using DUP: Standard installation

To install Dell Command | Configure, run the Dell Update Package (DUP) with default settings. This method simplifies deployment and requires minimal user input.

1. Klik dua kali DUP yang diunduh, klik Ya, lalu klik INSTALL.
   Perintah Dell | Konfigurasikan wizard instalasi ditampilkan.
2. Jalankan panduan instalasi.
   Untuk informasi selengkapnya, lihat Menjalankan wizard penginstalan.

Install Dell Command | Configure using DUP: Silent installation

To install Dell Command | Configure silently, use the Dell Update Package (DUP) with command-line switches that suppress user prompts. This method enables automated, unattended installation.

1. Browse to the folder where you have downloaded the Dell Update Package (DUP) and open the command prompt.
2. Jalankan perintah berikut:

Dell-Command-Configure-Application_<SWB>_WIN<architecture>_<version>.<build number>_A00.EXE/s.

NOTE: For more information about using commands, type any one of the following commands:

• Dell-Command-Configure-Application_<SWB>_WIN<architecture>_<version>.<build number>_A00.EXE/s.
• Dell-Command-Configure-Application_<SWB>_WIN<architecture>_<version>.<build number>_A00.EXE/?.

NOTE: During silent installation using DUP, Dell Command | Configure installs without Dell Command Secure BIOS Configuration Server.

Install Dell Command | Configure using MSI file: Standard installation

To install Dell Command | Configure, run the MSI file directly for a standard installation with default settings providing a simple and user-friendly setup process.

1. Klik dua kali Paket Pembaruan Dell (DUP) yang diunduh, dan klik Ya.
2. Klik EKSTRAK.
   Jendela Telusuri Folder ditampilkan.
3. Specify a folder location on the system, or create a folder to extract the files, and click OK.
4. Ke view yang diekstrak files, klik View Map.
   Folder tersebut berisi yang berikut ini files:
   ● 1028.mst
   ● 1031.mst
   ● 1034.mst
   ● 1036.mst
   ● 1040.mst
   ● 1041.mst
   ● 1043.mst
   ● 2052.mst
   ● 3076.mst
   ● Command_Configure.msi
   ● mup.xml
   ● package.xml
5. Untuk mengakses Perintah Dell | Konfigurasikan wizard instalasi, klik dua kali Command_Configure.msi.
6. Jalankan panduan instalasi.
   Untuk informasi selengkapnya, lihat Menjalankan wizard penginstalan.
   After you install Dell Command | Configure , you can use the GUI or the CLI to configure the client systems. For more information about configuring the systems, see the following documents at Support | Dell:
   ● Dell Command | Configure Command-Line Interface Reference Guide
   ● Dell Command | Configure User’s Guide

Menjalankan wizard instalasi

To run the installation wizard for installing the Dell Command | Configure .msi file di perangkat Anda:

1. Browse to the folder in which you have extracted the Command_Configure.msi or DUP file.
2. Right-click the .msi or DUP and click Run as administrator.
   Wisaya instalasi ditampilkan.
3.  Klik Berikutnya.
   Layar Perjanjian Lisensi ditampilkan.
4. Baca perjanjian lisensi dan klik Saya menerima ketentuan dalam perjanjian lisensi, lalu klik Berikutnya.
   Layar Informasi Pelanggan ditampilkan.
5. Type the username and organization, select one of the following options, and then click Next.
   ● For multiple users, select Anyone who uses this computer (all users).
   ● For a single user, select Only for me (Dell Computer Corporation).
   Layar pengaturan kustom ditampilkan.
6. Klik Berikutnya untuk menginstal Dell Command | Konfigurasikan CLI dan GUI di direktori default. Perintah Dell default | Konfigurasi direktori instalasi adalah:
   ● For 32-bit systems, C:\Program Files\Dell\Command Konfigurasi.
   ● For 64-bit systems, C:\Program Files (x86)\Dell\Konfigurasi Perintah.
   Layar Siap Menginstal Program ditampilkan.
7. Klik Ya.
   The Installing Dell Command | Configure screen is displayed. When the installation completes, the installation wizard- completed screen is displayed.
8. Klik Selesai.
   Jika Perintah Dell | Konfigurasi GUI berhasil diinstal, pintasan untuk GUI ditampilkan di desktop.

Install Dell Command | Configure using .msi file: Silent installation

You can seamlessly install Dell Command | Configure in silent mode using the .msi file, leveraging command-line parameters for efficient deployment.

CATATAN: Dell Command | Configure silent mode installation supports installing the Dell Command Secure BIOS Configuration Server, but it does not support the Dell Command | Configure option.

CATATAN: By default, during silent installation using the .msi file, Dell Command | Configure installs without Dell Command Secure BIOS Configuration Server. To install DCC with DCSBC server, use the following command: msiexec.exe /i Command_Configure.msi DCSBC=1 /qn

1. Masuk ke folder tempat Dell Command | Configure installer diekstrak dari Dell Update Package (DUP).
2. Open Command Prompt as administrator.
3. Jalankan perintah berikut: msiexec.exe /i Command_Configure.msi /qn
   Perintah Dell | Komponen konfigurasi diinstal secara diam-diam di lokasi berikut:
   ● For 32-bit systems, C:\Program Files\Dell\Command Konfigurasi.
   ● For 64-bit systems, C:\Program Files (x86)\Dell\Konfigurasi Perintah.

Menginstal dengan bahasa yang didukung

To assess silent and unattended with supported languages, run the following command: msiexec /i Command_Configure.msi TRANSFORMS=1036.mst.

To specify the installation language, use the command-line option TRANSFORMS=<language ID>.mst, where <language ID> corresponds to one of the following:

• 1028 — Tiongkok Taiwan
• 1031—Jerman
• 1033 — bahasa Inggris
• 1034 — Spanyol
• 1036 — Prancis
• 1040 — Italia
• 1041—Jepang
• 1043 — Belanda
• 2052 — Bahasa Cina Sederhana
• 3076 — Cina Hongkong

CATATAN: If the specified language or the default operating system language is not supported, the installation defaults to English.

Uninstalling Dell Command | Configure from Windows systems

To uninstall Dell Command | Configure, use the Control Panel to remove the application from Windows ensuring clean removal without affecting system settings.

1. Buka Panel Kontrol.
2. Pergi ke Program > Program dan Fitur.
3. Find Dell Command | Configure dalam daftar.
4. Right-click it and select Copot pemasangan.
5. Follow the on-screen prompts to complete the uninstallation.

Upgrading Dell Command | Configure on Windows systems

You can upgrade Dell Command | Configure using a Dell Update Package (DUP) or the .msi file.

CATATAN: Microsoft .NET Framework 8.0 or later must be installed on the client system to ensure a successful Dell Command | Configure user interface installation.

CATATAN: If Windows User Account Control (UAC) is enabled on Windows 10 and 11 systems, you cannot install Dell Command | Configure in silent mode. Ensure that you have an administrative privilege before installing Dell Command | Configure in silent mode.

CATATAN: This system does not have a WMI-ACPI compliant BIOS, so the limited functionality is available. Update the BIOS with a compatible version, if available. For more information, see Dell Command | Configure 5.x Release Notes at Support | Dell.

CATATAN: You cannot install and upgrade Dell Command | Configure on non-WMI-ACPI in silent mode.

Upgrade Dell Command | Configure using DUP file

Lakukan langkah-langkah berikut untuk memutakhirkan Dell Command | Konfigurasikan (sebelumnya Perangkat Konfigurasi Klien Dell) ke versi berikutnya:

1. Double-click the downloaded DUP, and then click MEMASANG.
   Perintah Dell | Wizard penginstalan konfigurasi diluncurkan.
2. Jalankan wizard penginstalan, dan ikuti instruksi yang ditampilkan di layar.

Upgrade Dell Command | Configure using .msi file

To upgrade Dell Command | Configure, uninstall the existing version and install the new version using the .msi installer ensuring a clean upgrade with the latest features and fixes.

1. Unduh instalasi terbaru file Dell-Command-Configure-
   Application_<SWB>_WIN<architecture>_<version>.<build number>_A00.EXE from Support | Dell.
2. Extract the installation using any of the following:
   ● From the folder where you extracted the file, double-click the Dell_Command_Configure.msi file
   ● From the command prompt, browse to the directory where you extracted the file, lalu jalankan perintah berikut ini:
   msiexec.exe /i Command_Configure.msi REINSTALL=SEMUA REINSTALLMODE=VOMUS
   CATATAN: Layar wizard penginstalan ditampilkan diikuti oleh “Versi Dell Command yang lebih lama | Konfigurasi terdeteksi pada sistem ini. Jika Anda melanjutkan, penginstal akan menghapus versi lama dan melanjutkan untuk menginstal versi terbaru. Jika Anda membatalkan penginstalan versi terbaru, sistem tidak akan dikembalikan ke versi Dell Command | sebelumnya Konfigurasi. Apakah Anda ingin melanjutkan?" pesan.
3. Ikuti petunjuk di layar untuk meningkatkan.
   CATATAN: Untuk pemutakhiran diam, jalankan perintah berikut: msiexec /i Command_Configure.msi REINSTALL=ALL REINSTALLMODE=vmous REBOOT=REALLYSUPPRESS /qn
   NOTE: If a previous version of Dell Command | Configure is installed in a non-default directory, you cannot upgrade to the latest Dell Command | Configure version. In this case, uninstall the existing version and assess fresh installation of the latest version.

Memutakhirkan di folder default

To upgrade Dell Command | Configure, run a command from the extracted DUP folder to silently install the update in the default directory.

1. Telusuri ke folder tempat Anda mengekstrak Dell Command | Konfigurasikan penginstal dari Dell Update Package (DUP).
2. Jalankan perintah berikut: msiexec.exe /i Command_Configure.msi /qn
   Perintah Dell | Komponen konfigurasi diinstal secara diam-diam di lokasi berikut:
   ● For 32-bit systems, C:\Program Files (x86)\Dell\Konfigurasi Perintah.
   ● For 64-bit systems, C:\Program Files (x86)\Dell\Konfigurasi Perintah.

Dell Command | Configure for Linux

This section provides details about the supported Linux versions and Dell platforms, and explains how to install and uninstall Dell Command | Configure on Linux systems.

Topik:

• Supported operating systems for Linux
• Supported Platforms for Linux
• Installing Dell Command | Configure on Linux systems
• Uninstalling Dell Command | Configure on Linux systems
• Upgrading Dell Command | Configure for systems running on Linux

Supported operating systems for Linux

Tabel 4. Sistem operasi yang didukung

Supported Platforms for Linux

Table 5. Supported platforms

CATATAN: Platforms must support WMI-ACPI BIOS for full functionality.

CATATAN: For systems with non-WMI-ACPI compliant BIOS, functionality is limited. For more information, see Dell Command | Configure Version 5.x User’s Guide at Support | Dell.

Installing Dell Command | Configure on Linux systems

To install Dell Command | Configure on Linux, download the appropriate .deb or .rpm package from Dell Support and use your package manager to install it enabling CLI-based BIOS configuration on supported Dell systems.

CATATAN:

• Dell Command | Configure user interface is not supported on systems running the Linux operating system.
• Dell Command Secure BIOS Configuration(DCSBC) is not supported on systems running the Linux operating system.

You can install the Dell Command | Configure for Red Hat and Debian-based linux distributions, by following these steps:

1. Go to Support | Dell, download the tar.gz file.
2. CATATAN:
   ● If you have downloaded the package for Red Hat Enterprise Linux, the RPMs are included in the package.
   ● If you have downloaded the package for Ubuntu Desktop, the Debians are included in the package.

Install the RPMs or Debians as appropriate for your system.
Jalur instalasi default adalah /opt/dell/dcc.

Prasyarat

• Workstation harus berjalan pada sistem operasi Linux yang didukung.
• Unduh pustaka openSSL 1.x untuk menginstal dan menjalankan Perintah Dell | Konfigurasi di Red Hat Enterprise Linux 8 dan Ubuntu Desktop 20.04.
• Download openSSL 3.x libraries to install and run Dell Command | Configure on Red Hat Enterprise Linux 9, Ubuntu Desktop 22.04, and Ubuntu Desktop 24.04.

Install Dell Command | Configure on Red Hat Enterprise Linux 8 and 9

To install Dell Command | Configure on Red Hat Enterprise Linux 8 or 9, download the RPM package from Dell Support and install it using the command line.

1. Dari dell.com/support, Download the command-configure-<version>-<Build Number>.<RHEL Version>.<architecture>.tar.gz file from Support | Dell .
2. Buka tar itu file menggunakan perintah berikut:

tar -zxvf command-configure-<version>-<Build Number>.<RHEL Version>.<architecture>.tar.gz

To install Dell Command | Configure on systems running Red Hat Enterprise Linux 8 or 9 systems using 64-bit RPMs, run the commands in the following order:

rpm —ivh srvadmin-hapi-<version number>.el8.x86_64.rpm

rpm —ivh command-configure-<version number>-<Build Number>.<RHEL Version>.<architecture>.rpm

Installing Dell Command | Configure for systems running on Ubuntu Desktop 20.04, 22.04 and 24.04

To install Dell Command | Configure on supported Ubuntu versions, download the DEB package from Dell Support and install it using the command line. See Accessing Dell Command | Configure installer.

1. Download the command_configure-<version>-<Build Number>.<Ubuntu Version>_<architecture>.tar.gz from Support | Dell.
2. Buka tar itu file using the following command: tar -xvzf command-configure_<version>-<Build Number>.<Ubuntu Version>_<architecture>.tar.gz
   The installer command-configure_<version><Build Number>.<Ubuntu
   Versi>_ .tar.gz berisi paket-paket berikut yang harus diinstal dengan urutan sebagai berikut:
   ● srvadmin-hapi_<version number>_amd64.deb
   ● command-configure_<version>-<Build Number>.<Ubuntu Version>_<architecture>.deb
3. To install HAPI, run the following command: dpkg -i srvadmin-hapi_<version number>_amd64.deb
   CATATAN: If the installation on Ubuntu fails due to dependency issues with libc, ensure that you upgrade the system by running the following command:
   apt-get -f instal
4. To install Dell Command | Configure, run:
   dpkg -i command-configure_<version>-<Build Number>.<Ubuntu Version>_<architecture>.deb
   Jalur instalasi default adalah /opt/dell/dcc.
   CATATAN: If the installation on Ubuntu fails due to dependency problems libc, then ensure to upgrade the system using apt-get upgrade command:
   apt-get -f instal

Uninstalling Dell Command | Configure on Linux systems

To uninstall Dell Command | Configure on Linux, run the appropriate RPMs for your system to remove the installed package (rpm or deb) based on your distribution removing the application and its components.

CATATAN: Uninstalling or upgrading Dell Command | Configure on systems running supported Linux operating systems leave empty files and folders on the system. These residual files and folders do not affect system functionality.

Uninstall Dell Command | Configure from Red Hat Enterprise Linux 8 and 9

Untuk menghapus instalasi Perintah Dell | Konfigurasikan pada sistem yang menjalankan Red Hat Enterprise Linux 8 atau 9, jalankan perintah dengan urutan berikut:

rpm -e command-configure-<version>-<build number>.el8/9.x86_64

rpm -e srvadmin-hapi- .el8.x86_64

Uninstall Dell Command | Configure from Ubuntu Desktop

You can uninstall Dell Command | Configure and dependent packages on systems running Ubuntu Desktop 20.04, 22.04 and 24.04 using a Deb package.

CATATAN: You must uninstall Dell Command | Configure before uninstalling the dependent packages.

1. Untuk menghapus instalasi Perintah Dell | Konfigurasikan dan hapus konfigurasi files dan sementara files, run the following command: dpkg –purge command-configure
2. Untuk menghapus instalasi Hapi dan menghapus konfigurasi files dan sementara files, run the following command: dpkg –purge srvadmin-hapi
3. To verify that the Dell Command | Configure is uninstalled in your system, run the following command: dpkg –l | grep command-configure
   If Dell Command | Configure details are not displayed, then the uninstallation is successful.

Upgrading Dell Command | Configure for systems running on Linux

You can upgrade Dell Command | Configure on Linux, uninstall the existing version and install the latest package.

1. Download the Dell Command | Configure .tar.gz file from Support | Dell and save it on your system.
2. Tingkatkan versi Dell Command | Konfigurasi pada sistem.

CATATAN: Uninstalling and upgrading Dell Command | Configure on systems running supported Linux operating systems leaves empty files dan folder pada sistem. Itu files dan folder tidak memiliki dampak fungsional apa pun.

Upgrade Dell Command | Configure on Red Hat Enterprise Linux 8 and 9

To upgrade Dell Command | Configure on Red Hat Eenterprse Linux 8 or 9, uninstall the current version and install the latest RPM package.

1. Download the command-configure-<version>-<Build Number>.<RHEL Version>.x86_64.tar.gz file from Support | Dell.
2. Buka tar itu file using the following command: tar -zxvf command-configure-<version>-<Build Number>.<RHEL Version>.x86_64.tar.gz

To upgrade Dell Command | Configure on computers running Red Hat Enterprise Linux 8 or 9 computers using 64-bit RPMs, run the commands in the following order:

rpm -Uvh –nodeps srvadmin-hapi- . .x86_64.rpm

rpm —Uvh command-configure-<version>-<build number>.<RHEL Version>.x86_64.rpm

Upgrade Dell Command | Configure on Ubuntu Desktop

To upgrade Dell Command | Configure for systems running on Ubuntu Desktop 20.04, 22.04 and 24.04 using a Deb package.

1. Download the command_configure-linux-<version>-<build number>.tar.gz from Support | Dell.
2. Buka tar itu file using the following command: tar -zxvf command-configure_<version>-<build number>.<Ubuntu Version>_amd64.tar.gz
3. Untuk meningkatkan, jalankan perintah berikut:
   dpkg -i srvadmin-hapi_<version number>_amd64.deb
   dpkg -i command-configure_<version>-<build number>.<Ubuntu Version>_amd64.deb
4. Untuk memverifikasi Perintah Dell saat ini | Konfigurasikan versi, buka jalur instalasi default dan jalankan:
   ./cctk –version

Advanced Dell Command | Configure installation scenarios

Bab ini memberikan gambaran umumview of advanced installation scenarios for Dell Command | Configure, including secure BIOS configuration and installation in the Windows Preinstallation Environment (Windows PE). These scenarios ensure robust system management and deployment capabilities.

Topik:

• Installing Dell Command | Configure for Dell Command Secure BIOS Configuration
• Dell Command | Configure for Windows Pre installation Environment.

Installing Dell Command | Configure for Dell Command Secure BIOS Configuration

Hardware Security Module (HSM) is used as a signing method for the Dell Command Secure BIOS Configuration workflow.

CATATAN: Dell Command Secure BIOS Configuration(DCSBC) is not compatible with ARM64-bit systems.

Prasyarat

Dell Command Secure BIOS Configuration with Dell Command | Configure allows you to use any Hardware Security Module vendor to sign the Dell Command Secure BIOS Configuration Server muatan.

Pastikan bahwa persyaratan berikut dipenuhi:

• HSM Setup and OpenSSL: Ensure that you have set up your Hardware Security Module (HSM) provider in your environment. It is recommended to use OpenSSL as the open-source signing tool to generate signatures, which can then be used by Dell Command | Configure.
• Update HSMSigning.bat File: You must update the HSMSigning.bat file with a command compatible with your HSM setup. This file is at: C:\Program Files (x86)\Dell\Command Configure\X86_64\HSMSigning.bat. Modify the signature generation command in line 12 according to your HSM provider requirements. The default command is: “%OpensslPath%\openssl.exe” dgst -sha256 -sign “%ObfuscatedKeyPath%\%PrivateKeyName%” -out “%outlocat%\blobsignature.txt” %1 . Ensure that the command you provide generates the signature in the same path as specified in the default command, with the filename set as blobsignature.txt. Do not modify the last option %1, as it allows the signature command to accept the payload file that is generated by Dell Command | Configure during runtime for signing.

Installing Dell Command | Configure for Dell Command Secure BIOS Configuration Server

To install Dell Command | Configure for use with the Secure BIOS Configuration Server, download the appropriate installer package and follow the setup instructions to enable remote BIOS configuration and policy enforcement.

1. Run Command_Configure.msi from Power Shell in administrator mode.
   Wisaya instalasi ditampilkan.
2. Select the Dell Command Secure Bios Configuration Server option.
3. Klik Berikutnya.
4. Klik Instal untuk memulai instalasi.
   The installation completion wizard is displayed.
5. Klik Selesai untuk menyelesaikan instalasi.
   The Dell Secure Configuration Service is created and initiated in the Windows Services tab.
   CATATAN: To run Dell Secure Configuration on a particular port, the port must be updated to the appsettings.json file di URL line. Locate the following path: C:\Program Files (x86)\Dell\Command Configure\ABIWindowsService\appsettings.json.
   CATATAN: The start time for Dell Command Secure BIOS Configuration varies depending on the platforms—the maximum time limit is set to 2-3 minutes.

Configuring the Dell Command Secure BIOS Configuration Server using HTTPS

The Dell Command | Configure installer configures the Dell Command Secure BIOS Configuration Server for HTTP calls. For added security, you can also configure the Dell Command Secure BIOS Configuration Server using HTTPS on the system where Dell Command Secure BIOS Configuration is installed, by following these steps:

1. Press the Windows key and press the R key to launch the Run dialog box.
2. Type Services.msc and then press Enter to open Windows Services.
3. Locate Dell Secure Configuration Service.
4. Right-click Dell Secure Configuration Service, and click Stop.
5. Go to the Dell Command | Configure installation path C:\Program Files (x86)\Dell\Command
   Configure\ABIWindowsService\appsettings.json, and modify the appsettings.json file dengan yang berikut ini:
   {
   “Logging”: {
   “LogLevel”: {
   “Default”: “Information”,
   “Microsoft.Hosting.Lifetime”: “Information”
   }
   },
   “Kestrel”: {
   “Endpoints”: {
   “HttpsInlineCertFile”: {
   “Url”: “< URL:Port>”,
   “ClientCertificateMode”: “AllowCertificate”,
   “Certificate”: {
   “Path”: “<Https certificate complete path>”,
   “Password”: “<Https Cert Password>”
   }
   }
   }
   }
   }
   CATATAN: The certificate to be provided must be associated to the Url specified in the same field. Also, specify the Client Certificate Modeas Allow Certificate to allow Dell Command Secure BIOS Configuration server to function without any issues. You must specify the complete Path for the Https certificate and the Password for authenticating the Https Certificate. The Password can be left empty if the Https certificate does not require a password authentication.
6. Save changes to the appsettings.json file and start the Dell Secure Configuration Service from Windows Services.
   CATATAN: There are other ways as well to configure an HTTPS Server. For more details, see Configure endpoints for the ASP.NET Core Kestrel web server and Client Certificate Mode Enum.

Dell Command | Configure for Windows Preinstallation Environment

Windows Preinstallation Environment (WinPe) provides a stand-alone preinstallation environment that is used to prepare a system for Windows installation. For client systems that do not have an operating system that is installed, you can create a bootable image that contains Dell Command | Configure to run the Dell Command | Configure commands on Windows PE. To create Windows PE 10.0, and Windows PE 11.0 images, you can use Windows Assessment and Deployment Kit (Windows ADK).

Using Windows PE 10.0, and Windows PE 11.0, you can integrate Dell Command | Configure.

CATATAN: Dell Command | Configure 5.x for Windows Preinstallation Environment is not compatible with ARM64-bit systems.

Membuat lingkungan pra-pemasangan gambar yang dapat di-boot menggunakan Windows PE 10.0 dan 11.0

To create a bootable image using Windows PE 10.0 or 11.0, use the Windows ADK to generate a customized Windows PE environment, then add the necessary tools and drivers before creating a bootable ISO or USB. This environment supports preinstallation tasks such as BIOS configuration and OS deployment.

1. Dari Microsoft websitus, unduh dan instal Windows ADK pada sistem klien.
   CATATAN: Saat menginstal pilih saja Alat Penyebaran and Windows Preinstallation Environment (Windows PE).
2. From Support | Dell, download and install Dell Command | Configure.
3. Instal Perintah Dell | Konfigurasi.
4. Integrasikan Perintah Dell | Konfigurasikan struktur direktori menjadi ISO file untuk membuat citra ISO yang dapat di-boot.

Mengintegrasikan Perintah Dell | Konfigurasikan struktur direktori menjadi ISO file using Windows PE 10.0/11.0

To integrate the Dell Command | Configure directory into an ISO, copy it to the Windows PE working folder and create the Windows PE 10.0/11.0 image.

1. Instal sistem operasi Windows 11.
2. Download and install Windows ADK for Windows 10/11 operating system.
3. Create a Windows PE 10.0/11.0 image.

Creating a Windows PE 10.0/11.0 image

1. Browse to the following location:.
   ● For 32-bit systems, C:\Program Files(x86)\Dell\Command Configure\X86.
   ● For 64-bit systems, C:\Program Files(x86)\Dell\Konfigurasi Perintah\X86_64.
2. Buka prompt perintah dengan hak administrator.
3. Run the following command: .
   ● Windows PE 10.0
   ○ For 32-bit systems, cctk_x86_64_winpe_10.bat C:\winpe_x86 C:\Progra~2\Dell\Comman~1.
   ○ For 64-bit systems, cctk_x86_64_winpe_10.bat C:\winpe_x86_64 C:\Progra~2\Dell\Comman~1.
   ● Windows PE 11.0
   ○ For 32-bit systems, cctk_x86_64_winpe_11.bat C:\winpe_x86 C:\Progra~2\Dell\Comman~1.
   ○ For 64-bit systems, cctk_x86_64_winpe_11.bat C:\winpe_x86_64 C:\Progra~2\Dell\Comman~1.
   CATATAN: Pastikan bahwa jalur yang digunakan dalam perintah adalah dari Dell Command | Konfigurasi folder.
4. Copy the ISO image to the following location:
   ● For 32-bit systems, C:\winpe_x86\WIM.
   ● For 64-bit systems, C:\winpe_x86_64\WIM.

Sumber daya dan dukungan

Anda dapat mengakses dokumen yang diperlukan dengan memilih produk Anda.

1. Pergi ke Dukungan | Dell.
2. Klik Telusuri semua produk.
3. Klik Software & Solutions.
4. Klik Manajemen Sistem Klien.
5. Klik Dell Command | Configure.
6. Klik Pilih Produk Ini.
7. Ke view dokumen yang diperlukan, klik nama produk dan nomor versi yang diperlukan.

CATATAN: Jika Anda tidak memiliki koneksi Internet aktif, Anda dapat menemukan informasi kontak tentang faktur pembelian, slip pengepakan, tagihan, atau katalog produk Dell.

Dell menyediakan beberapa opsi dukungan dan layanan berbasis daring dan telepon. Ketersediaan bervariasi menurut negara atau kawasan dan produk, dan beberapa layanan mungkin tidak tersedia di wilayah Anda. Untuk menghubungi Dell terkait masalah penjualan, dukungan teknis, atau layanan pelanggan:

1. Buka Dukungan | Dell.
2. Pilih kategori dukungan Anda.
3. Verifikasi negara atau wilayah Anda di Pilih Negara/Wilayah daftar drop-down di bagian bawah halaman.
4. Pilih layanan atau tautan dukungan yang sesuai berdasarkan kebutuhan Anda.

Dokumen / Sumber Daya

DELL Command Configure Software [Bahasa Indonesia:] Panduan Pengguna Command Configure Software, Configure Software, Software

Referensi

• Panduan Pengguna