Elecrow-LOGO

Elecrow ESP32 AI Camera Development Board Vision Sensor Board

Elecrow-ESP32-AI-Camera-Development-Board-Vision-Sensor-Board-PRODUCT

Suku Cadang Perangkat

Elecrow-ESP32-AI-Camera-Development-Board-Vision-Sensor-Board-FIG-1

  1. Header Speaker
  2. Lampu RGB
  3. Tombol Al
  4. mikrofon
  5. Header UART
  6. Slot TF Card
  7. Kamera
  8. Cahaya Bantu
  9. Tombol Reset
  10. Pembicara
  11. Port Tipe-C
  12. Lampu Daya
  13. Lampu Baterai
  14. BAT Header

Panduan Cepat

  • Al Button:
    • In “Al Voice” mode, click to toggle the “Standby/Listening” status.
  • Atur Ulang Kunci:
    • Single-click to reboot after firmware flashing failure or device malfunction.
  • Lampu Daya:
    • The red LED is on steadily when powered.
  • Lampu Baterai:
    • When powered by the battery, the red light stays on while charging, and the green light stays on when fully charged.

Penyandingan Jaringan

  1. Plug in the Type-C cable to power on.
  2. If you want to use the “Al Online” feature, you need to network pair and register the Al Agent first.
  3. Open your phone/computer’s WiFi list, click on “Al_Camera_XXXX” to enter WiFi pairing mode.
    • Jika webpage does not open automatically, please visit 192.168.4.1 in your browser.
  4. Choose an available 2.4GHz WiFi, enter the WiFi password, and click “Save Configuration”.
    • You can see your Wifi in “WiFi Network”.Elecrow-ESP32-AI-Camera-Development-Board-Vision-Sensor-Board-FIG-2
    • Catatan: If you want to clear your network, open the “Settings” app, then open the “Configure Network”, and click “RECONFIGURE”.Elecrow-ESP32-AI-Camera-Development-Board-Vision-Sensor-Board-FIG-3
  5. Open the “Al Online” app, then open a browser and go to https://portal.thinknode.cc/ to access the Al Hub interface. If this is your first time logging in, you need to click the “Create Account” button to create an account.Elecrow-ESP32-AI-Camera-Development-Board-Vision-Sensor-Board-FIG-4
  6. After the account is successfully created and logged in, you will receive a 5000-point reward.Elecrow-ESP32-AI-Camera-Development-Board-Vision-Sensor-Board-FIG-5
  7. Click the “Al Hub” button to start “Add Agent”.Elecrow-ESP32-AI-Camera-Development-Board-Vision-Sensor-Board-FIG-6
  8. Click “Add Agent” and give your Al Agent a name.Elecrow-ESP32-AI-Camera-Development-Board-Vision-Sensor-Board-FIG-7
  9. Click “Manage devices (0)”, then click “Add Device”, enter the verification code, and confirm.Elecrow-ESP32-AI-Camera-Development-Board-Vision-Sensor-Board-FIG-8Elecrow-ESP32-AI-Camera-Development-Board-Vision-Sensor-Board-FIG-9
  10. After completing “Add Device”, you can configure the character.Elecrow-ESP32-AI-Camera-Development-Board-Vision-Sensor-Board-FIG-10
  11. If you want to browse “Historical conversations”, you need to first enable “Local Short-term Memory” and save.Elecrow-ESP32-AI-Camera-Development-Board-Vision-Sensor-Board-FIG-11
    • Catatan: If your 5000 points are used up, you need to click “Recharge” to purchase a plan that will allow you to regain points.

Spesifikasi Utama

  • Nama Produk: Al Camera Module
  • Pengendali Utama Bahasa Indonesia: ESP32-S3R8
  • Menampilkan 1.83-inch TFT-LCD Touch Screen
  • Piksel 2 MP
  • Nirkabel WiFi & Bluetooth 5.0
  • Kilatan 16MB
  • Slot TF Card Mendukung hingga 128GB
  • Antarmuka UART Interface. IC Pad
  • Masukan Tegangan 5V/1A
  • Ukuran Ukuran 56.05*44.5*18.6mm
  • Suhu Operasional -20°C hingga 65°C

Dokumen / Sumber Daya

Elecrow ESP32 AI Camera Development Board Vision Sensor Board [Bahasa Indonesia:] Panduan Pengguna
ESP32 AI Camera Development Board Vision Sensor Board, ESP32, AI Camera Development Board Vision Sensor Board, AI Camera Development Board Vision Sensor Board, AI Camera Development Board, Camera Development Board, Vision Sensor Board, Sensor Board

Referensi

Tinggalkan komentar

Alamat email Anda tidak akan dipublikasikan. Bidang yang wajib diisi ditandai *