PETUNJUK PENGGUNAAN
Pemrogram Alamat Terminal
| PRG.PAS.MCS |
| 170x112x35mm/ 270g |
| Plastic case + mechanical keyboard 0°C … 45°C – IP 31 |
| Catu daya: 9V (baterai/baterai isi ulang) |
| Koneksi ke terminal melalui Kabel Patch UTP 0.25 cm |
| Alamat yang tersedia untuk pemrograman: antara “000” dan “998” Mengetik “999” mengakhiri pemrograman alamat. |
KETERANGAN
Itu PRG.PAS.MCS programmer allows the programming of the address (apartment number) for all types of terminals in the Garis Klasik range: PAS.17A, PAS.27X, PAS.37X, MCS.47X.
This programmer serves as the mobile alternative to the terminal address programming function, enabling the address to be programmed both on-site and in the office, by a single person.
KONEKSI KE TERMINAL
- Kabel Patch UTP 0.25 cm
- Kembali
- Depan
- Programmer PRG.PAS.MCS
- Terminal video – audio (MCS.47X, PAS.27X, PAS.37X)
AKTIF/ NONAKTIF
- The programmer is turned on by pressing the ON key.
- The programmer turns off:
– 3 seconds after entering the last digit of the programmed address;
– 10 seconds after being turned on, if no key is pressed.
PEMROGRAMAN
Langkah 1: Connect the programmer to the terminal.
Langkah 2: Tekan tombol ON key on the programmer → The display shows [Alamat pos].
Langkah 3: On the terminal, press and hold the 
kunci.
Langkah 4: On the programmer, enter the terminal address to be programmed (3 digits required). After entering the last digit, the terminal will issue a confirmation beep, and the key can be released.
07.2025 INS.PRG.PAS.MCS
DIBUAT di UE oleh:
ELECTRA srl
Parc Industri Miroslava
Str. Kepala Sekolah 33, 707307, Jud. Iași – RO
+40 232 214.370
penjualan@electra.ro
www.lectra.ro
MENDUKUNG
Komunikasi Gedung ELECTRA GmbH
Gadnergasse 71, Stockwerk 1, Buro Teratas 132
1110 Wien – AT
+43 1 810 20 99
penjualan@electra-automation.at
www.electra-automation.at
Dokumen / Sumber Daya
 |
Pemrogram Alamat Terminal Electra PAS.17A [Bahasa Indonesia:] Panduan Instruksi PAS.17A, PAS.27X, PAS.37X, MCS.47X, PAS.17A Pemrogram Alamat Terminal, PAS.17A, Pemrogram Alamat Terminal, Pemrogram Alamat, Pemrogram |