Isi
bersembunyi
Modul Papan Pengembangan HONGWEI MICROELECTRONICS ESP32 C3 Modul Mini Wifi BT Bluetooth
Spesifikasi
- Produk: ESP32 Development Board
- Pabrikan: Espressif
- Kesesuaian: Arduino IDE
- Weblokasi: https://www.arduino.cc/en/Main/Software
Petunjuk Penggunaan Produk
Download Software and Development Board
- Unduh perangkat lunak Arduino IDE dari situs resmi websitus yang disediakan di atas.
- Buka perangkat lunak Arduino IDE untuk memulai proses pengaturan.
Add ESP32 Development Environment
- Di Arduino IDE, buka File -> Preferences (shortcut key ‘Ctrl+,’).
- Add the JSON address of the ESP32 development board in the board manager settings.
- Click ‘OK’ to confirm and return to the Arduino IDE homepage.
- In the Development Board Manager, search for ESP32 and install the development environment.
Start Downloading and Testing
- Memilih File -> Contohample -> Blink to download a flashing light program for testing.
- Modify the code as needed, such as changing LED_PIN to the desired pin number.
- Select the corresponding port and development board model in Arduino IDE.
- If the Comport is not recognized, manually enter download mode following the provided methods.
- Click upload and wait for the download to complete. The blue indicator light on the module should flash normally.
Penafian dan Pemberitahuan Hak Cipta
Informasi dalam dokumen ini, termasuk URL alamat untuk referensi, dapat berubah tanpa pemberitahuan. Dokumentasi disediakan “sebagaimana adanya” tanpa jaminan apa pun, termasuk jaminan apa pun yang dapat diperjualbelikan, kesesuaian untuk tujuan tertentu, atau non-pelanggaran, dan jaminan apa pun yang disebutkan di bagian lain dalam proposal, spesifikasi, atau s apa pun.ample. Tidak ada tanggung jawab yang ditanggung dalam dokumen ini, termasuk tanggung jawab apa pun atas pelanggaran hak paten apa pun yang timbul dari penggunaan informasi dalam dokumen ini. Dokumen ini tidak memberikan, dengan estoppel atau lainnya, lisensi apa pun, baik tersurat maupun tersirat, untuk menggunakan hak kekayaan intelektual apa pun.
The test data obtained in this article are all obtained by the Ebyte laboratory test, and the actual results may be slightly different. All trade names, trademarks and registered trademarks mentioned herein are the property of their respective owners and are hereby acknowledged. Ebyte Electronic Technology Co., Ltd.
Catatan
Due to product version upgrade or other reasons, the contents of this manual may be changed. Ebyte Electronic Technology Co., Ltd. reserves the right to modify the contents of this manual without any notice or prompt. This manual is only used as a guide . Chengdu Ebyte Electronic Technology Co., Ltd. does its best to provide accurate information in this manual. However, Chengdu Ebyte Electronic Technology Co., Ltd. does not ensure that the contents of the manual are completely error-free. All statements in this manual, information ,and advice do not create any express or implied warranties.
Lebihview
Pengenalan produk
ESP32-C3-MINI-1-TB and ESP32-C3-MINI-1U-TB are two entry-level development boards for developing and testing small-sized ESP32-C3-MINI-1 & ESP32-C3-MINI-1U modules. This group of development boards has complete Wi-Fi and Bluetooth low energy functions, and most of the pins of the modules on the board have been led out to the pin headers on both sides. Developers can easily connect various peripherals through jumpers according to actual needs. The device can also be used by plugging the development board into the breadboard.
Parameter
Pengenalan komponen
Components and interfaces
Catatan: For specific function instructions, please refer to the user manual of ESP32-C3-MINI-1.
Definisi Pin
Ilustrasi positif berikut menunjukkan ESP32-C3-MINI-1-TB sebagai exampsaya:
Catatan
- P: power supply; I: input; O: output; T: can be set to high impedance.
- GPIO2, GPIO8, and GPIO9 are the strapping pins of the ESP32-C3FN4 chip. During chip power-on and system reset, the strapping pin controls the chip function according to the binary voltage value of the pin. For the specific description and application of the strapping pins, please refer to the chapter on strapping pins in the ESP32-C3 chip manual.
- The power supply mode is Micro-USB interface power supply (default), 5V and GND pin header power supply, 3 and V3 and GND pin header power supply.
Pengenalan fungsi
ESP32-C3-MINI-1-TB & ESP32-C3-MINI-1U-TB. The main components and connection methods are shown in the following diagram:
ESP32-C3-MINI-1-TB & ESP32-C3-MINI-1U-TB. The main components and connection methods are shown in the following diagram:
Panduan Pembakaran Program
- Sebelum dinyalakan, pastikan ESP32-C3-MINI-1-TB & ESP32-C3-MINI-1U-TB dalam keadaan utuh.
- Tools to prepare: ESP32-C3-MINI-1-TB or ESP32-C3-MINI-1U-TB, USB 2.0 cable (Standard A to Micro-B, computer -Windows, Linux, or macOS. Please make sure to use Appropriate USB cables; some cables are for charging only, not for data transfer and programming.
- Connect the USB data cable, and burn the program from the computer software.
Riwayat Revisi
Pertanyaan yang Sering Diajukan
How do I troubleshoot if the blue indicator light does not flash after uploading?
Check the connection between the development board and your computer, ensure the correct port and board are selected in Arduino IDE, and try re-uploading the program.
Can I use other development environments with this ESP32 board?
While these instructions are tailored for Arduino IDE, you may be able to adapt them for other environments that support ESP32 development.
Dokumen / Sumber Daya
 |
Modul Papan Pengembangan HONGWEI MICROELECTRONICS ESP32 C3 Modul Mini Wifi BT Bluetooth [Bahasa Indonesia:] Panduan Pengguna Modul Papan Pengembangan ESP32 C3, Modul Mini Wifi BT Bluetooth, ESP32 C3, Modul Papan Pengembangan, Modul Mini Wifi BT Bluetooth, Modul Papan, Modul Mini Wifi BT Bluetooth, Modul Wifi BT Bluetooth, Modul Bluetooth |