LTECH KMS1 Switch Module
Pengenalan Produk
- Fully supports major smart home ecosystems including Apple Home, SmartThings, Google Assistant, and Amazon, enabling unified management across platforms.
- Built-in Thread module, compatible with the Matter protocol, supports Siri, Google, and Alexa voice control.
- Supports OTA firmware updates to continuously receive the latest features and security patches, ensuring long-term device stability.
- Parameter settings for switch type and power-on status can be completed via the NFC Lighting App.
- Reserved mechanical switch/reset switch interface accommodates both traditional operating habits and smart scenario requirements.
Spesifikasi Teknis
| Model | KMS1 |
|---|---|
| Tipe nirkabel | Masalah di atas Thread |
| Ganti saluran | 1CH |
| Volume operasitage | Tegangan 100-240V~, 50/60Hz |
| Max. load parameters of the relay | Resistive load: 1000W@230Vac, 500W@110Vac Capacitive load: 400W@230Vac, 200W@110Vac |
| Arus lonjakan relai | 70A@10ms |
| Suhu kerja | -25°C~50°C |
| Ukuran produk | Panjang 45× Lebar 45.5× Tinggi 20.5 (mm) |
| Berat produk | 38 gram |
| Standar | UL 8750, EN 61347-2-13:2014+A1:2017, EN 61347-1:2015+A1:2021, EN 62493:2015/A1:2022 |
Gambar Produk
DIMENSI
- Satuan: mm
- Dimensi: 45 x 45.5 x 20.5
Diagram Pengkabelan
- Mechanical Switch Wiring Diagram
Includes connections for load, line (L), and neutral (N).
- Push Switch Wiring Diagram
Includes connections for load, line (L), and neutral (N).
Gunakan Aplikasi Pencahayaan NFC
Scan the QR code with your mobile phone and install the APP as prompted. Compatible with iOS 13 or above and Android NFC-enabled models.
Read the Device
Click “Read/Write LED driver” in the APP [home page], place the sensing area of the phone near the NFC identification point of the driver, and read the device parameters.
Ubah Parameter
Click “Parameter Management” to select the switch type. When selecting a reset switch, you can configure the device’s power-on state function.
Add to Matter Platform Instructions
- This device supports control via major smart home platforms, including Apple Home, Amazon Alexa, Google Home, Smart Things, and others.
- To connect Matter over Thread devices, prepare a Matter hub supporting Thread border router functionality from major platforms.
Model yang Kompatibel
Siapkan Contohample
- This guide uses Apple Home as an example. Prepare an iPhone (iOS 16.2 or later) or iPad (iPadOS 16.2 or later) with the latest firmware, along with an Apple HomePod mini also running the latest firmware. Connect your iPhone or iPad to your home Wi-Fi network, launch the Apple Home app, and follow Apple’s instructions to set up the HomePod mini.
- For iPhone models 15 and above, no Matter hub is required; they can be added directly.
Tambahkan Aksesori
- Open the Apple Home app and tap “Add or Scan Accessories.” Add the device to Apple Home by scanning the QR code sticker on the device.
- *You can also activate service via NFC: Simply hold your iPhone 16 or later model near the device’s NFC sensor area to be recognized and activated.
Perangkat Kontrol
After successfully adding the device to Apple Home, tap the device icon to turn it on or off.
Fitur Lanjutan
Supports creating groups, scenes, and automations, as well as remote control and scheduled control. Devices can also be controlled via Siri voice commands.
Kembalikan Pengaturan Pabrik
Reset Button Reset
Press and hold the reset button for 15 seconds until the indicator light flashes red rapidly, then release. Within 3 seconds, press the reset button three times briefly. The red light will then switch to slow flashing, indicating the device has begun restoring factory settings. When the indicator light flashes blue rapidly, the restoration is complete.
Hidupkan Ulang
Jika terjadi pemadaman listriktage, use the switch to power on the device for 15 seconds before powering it off. Repeat this power cycle six times consecutively (each cycle consisting of 2 seconds on and 5 seconds off). After the seventh power cycle, the load lamp will flash three times, indicating a successful reset to factory settings.
Perhatian
- Pemasangan dan commissioning produk harus dilakukan oleh profesional yang berkualifikasi.
- Our company products are not waterproof or lightning-proof (special models excepted). Please avoid the sun and rain. When installed outdoors, please ensure they are mounted in a waterproof enclosure or in an area equipped with lightning protection devices.
- Pembuangan panas yang baik akan memperpanjang umur kerja produk. Harap pastikan ventilasi yang baik.
- Silakan periksa apakah vol yang berfungsitage digunakan sesuai dengan persyaratan parameter produk.
- Diameter kawat yang digunakan harus dapat memuat perlengkapan lampu yang Anda sambungkan dan memastikan pemasangan kabel yang kuat.
- Sebelum Anda menghidupkan produk, pastikan semua kabel sudah benar jika terjadi kesalahan koneksi yang menyebabkan kerusakan pada perlengkapan lampu.
- Jika terjadi kesalahan, jangan mencoba memperbaiki produk sendiri. Jika Anda memiliki pertanyaan, silakan hubungi pemasok Anda.
Perjanjian garansi
Masa garansi sejak tanggal pengiriman: 2 tahun. Layanan perbaikan atau penggantian gratis untuk masalah kualitas diberikan selama masa garansi.
Pengecualian Garansi
- Di luar masa garansi.
- Setiap kerusakan buatan yang disebabkan oleh volume tinggitage, kelebihan beban, atau operasi yang tidak tepat.
- Produk dengan kerusakan fisik yang parah.
- Kerusakan yang disebabkan oleh bencana alam dan force majeure.
- Label garansi dan barcode telah rusak.
- No contract signed by our company.
Dokumen / Sumber Daya
 |
LTECH KMS1 Switch Module [Bahasa Indonesia:] Panduan Pemilik KMS1 Switch Module, KMS1, Switch Module, Module |