MAIMEIMI P8 Multi Function Head Up Display

Car Smart Digital Meter (Model: P8)
Thank you for purchasing our car smart digital meter. This product connects to the car’s OBD2 interface via an OBD cable and displays driving data such as vehicle speed, engine RPM, water temperature, fuel consumption, and voltage. It helps keep the driver’s eyes on the road, avoiding the danger of looking down at the dashboard. This product does not alter any car ECU data.
Spesifikasi
| Fitur | Keterangan |
|---|---|
| Bekerja Voltage | OBD2 mode: 11V~18VDC (12vdc/200mA) |
| Vol Tinggitage | Use USB cable for GPS mode if voltage lebih tinggi dari 24V |
| Sistem | Dual system: OBD or GPS |
Mohon Perhatian
- Mode kerja OBD2 voltage: 11V~18VDC (12vdc/200mA). When voltage lebih tinggi dari 24V, silakan gunakan kabel USB untuk mode GPS.
- This product is a dual system. After power on, select the language and system you are familiar with. Press the ‘>’ key to select OBD or GPS system, and automatically enter the last selected system after 5 seconds of inactivity.
Short press: press once to release. Long press: press for 2 seconds, then release after the display screen changes.
- saklar daya
- Jalur OBD dan antarmuka jalur USB
- Port dasi A-pilar
- Komponen fotosensitif: rasakan intensitas cahaya eksternal dan secara otomatis menyesuaikan kecerahan untuk beradaptasi dengan lingkungan
- Layar LCD
- Tekan sebentar tombol 'M': masuk ke menu pengaturan, tekan sebentar lagi untuk keluar dari pengaturan
- Tekan sebentar tombol '<':
- Ganti bahasa dan sistem saat pertama kali digunakan
- Ganti tampilan fungsi setelah tampilan normal
- Kurangi nilai menu atau parameter setelah memasuki pengaturan
- Tekan sebentar tombol 'OK':
- Pilih fungsi
- After normal display, switch the display screen, Long press ‘OK’ button: (1) Enter settings (2) After adjustment, press again for 2 seconds to save and exit
- Tekan sebentar tombol '>':
- Ganti bahasa dan sistem saat pertama kali digunakan
- Ganti tampilan fungsi kiri setelah tampilan normal
- Setelah memasuki pengaturan, tingkatkan menu atau nilai parameter

Singkatan Fungsi
| ECT – Suhu Pendingin Mesin | VLT – Jiltage | FUE – Konsumsi Bahan Bakar |
| RPM – Revolusi Per Menit | TIM – Waktu setempat | MIN-Waktu mengemudi |
| DIS – Jarak Mengemudi | MAP – Tekanan Masuk | OIT – Suhu Oli |
| A/F – Rasio Udara-Bahan Bakar | TCP – Tekanan Turbin | PSI – Tekanan Turbin |
| RTC – Jam Waktu Nyata | ALS – Ketinggian | GPS – Nomor satelit GPS |
| Arah mengemudi DIR |
Mode Pengaturan (Mode menu)
Long press ‘OK’ button for 2 seconds to enter the setting item, press the’>’ button to increase the menu option, short press the ’M‘ button again to enter the parameter value, short press the’>’ or'<‘ button to adjust the parameter value, short press ‘OK’ button Confirm and return to the menu, press and hold ‘OK’ button for 2 seconds to save and exit

- Kumpulan Bahasa: ( EN-English / CN – Mandarin Sederhana / TW – Mandarin Tradisional)
- Pengaturan sudut layar: rotasi layar empat segmen 0-90-180-270
- Sakelar Suara: nyalakan / matikan bel
- Pengingat ngebut: alarm ketika kecepatan kendaraan mencapai nilai default yang ditetapkan 150KM/jam, rentang pengaturannya adalah 5-200km/jam
- Engine temperature alarm :its default value 120 degrees C, range 50-200
- Engine speed alarm :its default value of 6000r/min ,range 1000-8000
- Jil.tage alarm setting :its default value of 10.5v,range 10.0-15.0v
- Speed adjustment: the operation is required only there is an error(e.g. instrument display 100 Km/h HUD shows 105Km/h, use default value 107-5=102)
- Speed zero :the vehicle speed does not return to 0 after the car stops (E.g. speed display 5Km/h, please adjust HUD to 6Km/h)
- Jil.tage penyesuaian: Penyetelan halus saat voltage salah dengan panel instrumen voltage (Jika perangkat menunjukkan 0.2V di atas meteran voltage, perangkat disesuaikan hingga 98%)
- Perpindahan mesin: harap sesuaikan jika ada terlalu banyak penyimpangan pada konsumsi bahan bakar (Misalnya, buat nilai parameter menjadi 3.6L, jika perpindahan mobil Anda 3.6L)
- Fuel consumption: making a fine-tuning if there is an error (If the device shows 0.2L above the meter voltage, perangkat disesuaikan hingga 98%)
- Kecerahan lampu latar: Peka cahaya otomatis otomatis, 1 untuk yang paling gelap, 8 untuk yang paling terang Satuan suhu: °C-Celcius °F-Fahrenheit
- Satuan kecepatan: Km/j: km, MPH: Mil
- Count mileage: total mileage synchronization(Keep it as same as dashboard, ex:odometer shows 30010km, adjust the parameter value to 30010km)
- Pengaturan penundaan shutdown: default adalah 10 detik untuk mematikan, ketika dimatikan saat mengemudi, dapat disesuaikan hingga lebih dari 180 detik
- Volume matitagpengaturan e: sesuaikan ke 13.2V atau 13.6 voltage mode shutdown ketika tidak dapat mematikan RPM adalah kecepatan default untuk shutdown, COM adalah mode start-stop otomatis dan mode khusus untuk kendaraan listrik hibrida
- System time adjustment: it can be adjusted to local time, the default time is China time (GMT+8) Factory reset: the system restores to the factory preset values. After selecting this operation, press the ’M‘ button to confirm
Driving test
- Percepatan test: kilometers acceleration refers to the seconds 0 to 100km/h,is a test of car power
- Rem test: the time and distance taken of a brake after the speed >100 , is a test of brake performance
Pengaturan pemecahan masalah
- Pindai kode kesalahan: Memindai mobil untuk mencari kode kesalahan
- Clear fault code: Short press ‘OK’ to clear the fault code when the car has fault code
- Baca aliran data: Tampilkan semua data di mesin mobil
Harap diperhatikan
Disarankan untuk mencabut perangkat jika mobil Anda tidak digunakan selama lebih dari satu minggu.
Tanya Jawab Umum
OBD2 F
Tidak ada fungsi yang ditampilkan, tidak ada daya
Check whether the OBD cable is tight connection, pull down repeatedly to confirm, please try it on another car if still not workable ,analysis if it is an error from OBD diagnostic interface, if yes, please repair it and connect the device again.
Hanya volume mobiltage ditampilkan dan matikan secara otomatis setelah 30 detik
This product is only applicable to OBDII and EOBD in OBD2 mode Automobile production year (OBDII and EOBD were only used in other regions after 2003and2007in other regions) The OBD2 mode of this product does not support OBD I and JOBD Please switch to the GPS system and use the USB cable to display, short press the ‘>’ buttonwithin5seconds of powering on to select the GPS system.
Perangkat tidak dapat mati secara otomatis
Sesuaikan volume tidurtage ke 13.2V atau 13.6V, maka HUD akan mati dalam 3 menit.
Mobil start-stop otomatis
Shutdown voltage setting in the system settings is adjusted to the COM mode, the automatics tart-stop and the special mode for gasoline-electric hybrid vehicles
Bahasa Indonesia: GPS
Layar tanpa tampilan apa pun, dan tidak ada daya
Start the car engine check if the cable line is tight; or connect the USB to the computer to check
Tanpa Kecepatan mobil
Setelah HUD dihidupkan, GPS akan mulai menemukan satelit. Silakan mengemudikan mobil ke jalan raya. Ini akan bekerja setelah mendapat lebih dari 5 sinyal satelit.
Tidak dapat dihidupkan secara otomatis atau berulang kali padam selama mengemudi
Please use the USB cable to insert the cigarette lighter If you use the OBD cable, change the sleep voltage ke 13.0V atau 12.8V Jika menggunakan kabel USB, buat volume tidurtagmati.
Waktu tidak akurat
Enter the setting items system time adjustment, Press ‘>’ to adjust the time zonetime, after adjustment, long press ‘OK’ to save and exit
Kesalahan tampilan arah mengemudi
After the vehicle speed exceeds 5KM/H, the direction can be displayed normally
Kecepatan masih ditampilkan setelah mobil berhenti
Satellite drift will be caused in underground parking,tunnel,overpass or blockers,please driveyourcar on open road,then this situation can be solved after the satellite numbers >5
Dokumen / Sumber Daya
![]() |
MAIMEIMI P8 Multi Function Head Up Display [Bahasa Indonesia:] Panduan Instruksi P8 Multi Function Head Up Display, P8, Multi Function Head Up Display, Function Head Up Display, Head Up Display, Display |

