Panduan Pengguna Perangkat Lunak MOSS IllumaSync

Penting: If other devices are powered on, they may flash randomly. Power off other devices or put them in manual mode.
Fungsi RDM: Press the RDM button next to each device in the list to access basic RDM functions.

Hubungkan & Temukan Perangkat:

Press Connect in the Individual Update tab.
If an error occurs, reinsert the USB and ensure the computer recognizes the device dongle.
Press Discover All to list connected devices.

Pilih Firmware & Perbarui Perangkat:

Click Browse and choose the firmware file.
Select the device and press Update. Expect flashing if other devices are not powered off.

Metode Alternatif:

Click the software version number to update a specific device.
Factory reset your device after firmware update by holding down the BACK & ENTER buttons.

IllumaSync™ Software Guide

IllumaSync™ software is designed to work with the IllumaDim™ product family of LED controllers. The software allows for firmware updates, setting updates, and simple DMX testing and control. Too use the software, you will require three things:

One or more IllumaDim™ Products from Moss LED™
IllumaSync™ software from the Moss LED™ weblokasi
IllumaSync™ USB Dongle

PENTING

Before you start, ensure that all devices are connected via DMX cabling and are powered on.

It is advised to only have IllumaDim™ products on the DMX chain when operating the IllumaSync Software.
Moss LED has not tested the effects of running the IllumaDim™ software while using non-IllumaDim™ products, and the effects are unknown.

Moss LED cannot be held liable for any unwanted effects caused by running IllumaSync™ software on nonnon-IllumaDim™™ products.

Plug all IllumaDim™ Products together via DMX cabling
Plug the IllumaSync™ USB to DMX Dongle Cable into the first IlluamDim™ product in the DMX chain

Download driver (if required) https://files.mossled.com/Software/CDM212364_Setup.zip
Download IllumaSync software https://files.mossled.com/Software/IllumaSyncV1.zip
Run IllumaSync™ Software
If prompted “Windows protected your PC,” choose “More Info” followed by “Run anyway”

PEMBARUAN FIRMWARE UNGGAH TUNGGAL

Functionality: Upload firmware to one IllumaDim™ device at a time. This method is most successful.

Penting: If other devices are powered on, they may flash randomly. Power other devices off or put them in manual mode.
RDM Function: Press the RDM button next to each device in the list to access basic RDM functions.

If the device gets stuck in update mode, power cycle the device and try again.
Do not remove power from the device during firmware update

PEMBARUAN FIRMWARE GRUP

Functionality: Upload firmware to multiple IllumaDim™ devices at a time.

Recommended: Use when devices are physically close together and connected with a professional DMX cable.
RDM Function: Press the RDM button next to each device in the list to access basic RDM functions.

If the device gets stuck in update mode, power cycle the device and try again.
Do not remove power from the device during firmware update

PEMBARUAN PENGATURAN GRUP

™
Functionality: Configure the settings of multiple IllumaDIM™ devices simultaneously

Recommended: Use when devices are physically close together and connected with a professional DMX cable.
RDM Function: Press the RDM button next to each device in the list to access basic RDM functions.

PENGUJI DMX

Functionality: IllumaSync™ can be used as a DMX tester for 1 universe at a time.

www.mossled.com
1.800.924.1585-416.463.6677
info@mossled.com

Tanya Jawab Umum

T: Apa yang harus saya lakukan jika perangkat macet dalam mode pembaruan?
A: Power cycle the device and try the update process again. Do not remove power during firmware update.

Dokumen / Sumber Daya

Perangkat Lunak MOSS IllumaSync [Bahasa Indonesia:] Panduan Pengguna
IllumaDimTM, Kabel Dongle USB ke DMX, Perangkat Lunak IllumaSync, Perangkat Lunak

Referensi

Panduan Pengguna

Perangkat Lunak MOSS IllumaSync

Spesifikasi

Petunjuk Penggunaan Produk