Panduan Referensi Nikon Zf Manual Pengguna

Perubahan dengan Versi Firmware “C” 3.00. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Fitur yang Tersedia dengan Firmware “C” Versi 3.00. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 “Versi Firmware”. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Perubahan yang Dilakukan dengan Firmware “C” Versi 3.00. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Fotografi Diam. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Perekaman Video. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Pemutaran ulang. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Kontrol. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Layar. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Jaringan. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 New Menu Item: “Film Grain Options”. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Opsi Mode Rilis Baru: “C15”. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Subject Detection Focus Point Now Displayed with Hi-Res Zoom. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Separate “Record Camera Orientation” Settings Available for Photos and Videos in the Playback Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 “Only During Zoom” Added to Custom Setting a12 “Focus Peaking”. . . . . . . . . . . . . . . . . . . . . . . . 12 New Custom Setting: a13 “Maximum Aperture Lv”. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 New Custom Setting: a15 “Focus Limiter Setting”. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Limiting the Focus Range. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 “Minimum” Added to Custom Setting c2 “Self-timer” > “Interval Between Shots”. . . . . . . . . . . . 17 New Options for Custom Settings d16/g14 “Grid Type”. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 New Options for Custom Settings f2 “Custom Controls (Shooting)” and g2 “Custom Controls”. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 New Roles Available via Custom Settings f2 “Custom Controls (Shooting)” and g2 “Custom Controls”. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Exposure Compensation and ISO Sensitivity Are Now Assignable to Command Dials in Mode M. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Changes to Setup Menu “Camera Sounds” Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 New Method for Adding Picture Controls from Nikon Imaging Cloud. . . . . . . . . . . . . . . . . . . . . . . . . 22 New Setup Menu Item: “Automatic Monitor Display Switch”. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 New Smart Device Connection Method: “Wi-Fi Connection (STA Mode)”. . . . . . . . . . . . . . . . . . . . .

Daftar isi

Connecting to an Existing Network (Wi-Fi Station Mode). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Direct Wireless Connection to a Smart Device (Wi-Fi Access Point Mode). . . . . . . . . . . . . . . . . . . 31 Terminating Wi-Fi Station/Wi-Fi Access Point Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 New Option for “USB” in Network Menu: “USB Streaming (UVC/UAC)”. . . . . . . . . . . . . . . . . . . . . . 33 Post-Upgrade Specifications for “C” Firmware Version 3.00. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Nikon Z f Digital Camera. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 F. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 G. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 H. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 M. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 P. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 R. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 S. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 U. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Daftar isi

Perubahan dengan Versi Firmware “C” 3.00
Fitur Tersedia dengan Firmware "C" Versi 3.00
The Z f Reference Guide is for “C” firmware version 1.10 (the latest version of the Z f Reference Guide is available from the Nikon Download Center).
The Z f Reference Guide (Supplement for Firmware Version 2.00) details the new features and changes introduced with camera “C” firmware versions 2.0x. This chapter details the new features and changes introduced with camera “C” firmware version 3.00.
“Versi Firmware”
Ke view versi firmware kamera atau perbarui firmware kamera, pilih [Versi firmware] di menu pengaturan.
Update your camera as follows: Download firmware from the Nikon Download Center using a computer: Check the Nikon Download Center for new firmware. For more information, see the firmware download page. https://downloadcenter.nikonimglib.com/ Download firmware via the SnapBridge app on a smart device: If the smart device has been paired with the camera using the SnapBridge app, the app will automatically notify you when updates become available, and you can then download the update to a camera memory card via the smart device. For more information, see the SnapBridge app’s online help. SnapBridge may not display the notification at the same time that updates are made available on the Nikon Download Center. Download firmware to the camera from Nikon Imaging Cloud: If the camera receives a firmware version update notification from Nikon Imaging Cloud, [Update now (Nikon Imaging Cloud)] appears in the [Firmware version] menu. Highlight [Update now (Nikon Imaging Cloud)] > [On] and press 2 to download the firmware to the camera via the Internet. The update will start automatically after the download is complete. Nikon Imaging Cloud may not send a notification to the camera at the same time that updates are made available on the Nikon Download Center.
4 Fitur yang Tersedia dengan Firmware Versi “C” 3.00

Perubahan yang Dilakukan dengan Versi Firmware “C” 3.00
Fitur-fitur yang ditambahkan atau diperbarui dengan firmware kamera “C” versi 3.00 dirangkum di bawah ini. Informasi selengkapnya tersedia di halaman yang tercantum.
Masih Fotografi
New Menu Item: “Film Grain Options” ( 0 7) New Release Mode Option: “C15” ( 0 9)
Rekaman Video
New Menu Item: “Film Grain Options” ( 0 7) Subject Detection Focus Point Now Displayed with Hi-Res Zoom ( 0 10)
Pemutaran ulang
Separate “Record Camera Orientation” Settings Available for Photos and Videos in the Playback
Menu ( 0 11)

Perubahan yang Dilakukan dengan Versi Firmware “C” 3.00

Kontrol

“Only During Zoom” Added to Custom Setting a12 “Focus Peaking” ( 0 12) New Custom Setting: a13 “Maximum Aperture Lv” ( 0 13) New Custom Setting: a15 “Focus Limiter Setting” ( 0 14) “Minimum” Added to Custom Setting c2 “Self-timer” > “Interval Between Shots” ( 0 17) New Options for Custom Settings d16/g14 “Grid Type” ( 0 18)
Opsi Baru untuk Pengaturan Kustom f2 “Kontrol Kustom (Pemotretan)” dan g2 “Kontrol Kustom”
( 0 19) Changes to Setup Menu “Camera Sounds” Options ( 0 21) New Method for Adding Picture Controls from Nikon Imaging Cloud ( 0 22)
Menampilkan
New Setup Menu Item: “Automatic Monitor Display Switch” ( 0 23)
Jaringan
New Smart Device Connection Method: “Wi-Fi Connection (STA Mode)” ( 0 24) New Option for “USB” in Network Menu: “USB Streaming (UVC/UAC)” ( 0 33)
D Nomor Menu Pengaturan Kustom
Beberapa nomor menu Pengaturan Kustom telah diubah karena penambahan dan penataan ulang menu yang menyertai pembaruan versi. Dokumen ini menggunakan nomor yang muncul setelah perubahan ini.

Perubahan yang Dilakukan dengan Versi Firmware “C” 3.00

New Menu Item: “Film Grain Options”
The [Film grain options] item has been added to the photo shooting and video recording menus. Use it to take grainy pictures that simulate the look of traditional film photography.

Option [Film grain] [Intensity] [Size] (photo shooting menu only)

Keterangan
Select [ON] to add a grainy texture to pictures.
Adjust the strength of the grainy texture from 1 to 6 (1 to 3 when recording videos). Select higher values for a rougher and grainier effect.
Select a grain size from [Large], [Medium], and [Small]. Larger sizes emphasize the grainy texture, while smaller sizes create a finer texture.
The size is fixed at [Small] for video recording.

D Notes on Using Film Grain
The film grain effect cannot be previewed in the shooting display. The film grain effect appears randomly. The grain pattern appears differently each time NEF (RAW) pictures are processed on the camera. The intensity and size settings are the values that were in effect when the pictures were taken. Selecting [HLG] for [Tone mode] in the photo shooting menu disables the film grain effect. Pictures may exhibit “noise” in the form of randomly-spaced bright pixels, fog, or lines depending on the options selected for image size and quality.
D Photography with Film Grain: Restrictions
Film grain cannot be combined with some camera features, including: high-speed frame capture +, multiple exposures, HDR overlay, and pixel shift.
D Video Recording with Film Grain: Restrictions
Film grain cannot be used when: – [H.265 10-bit (MOV)] is selected for [Video file type] in the video recording menu.

New Menu Item: “Film Grain Options”

– a frame size and rate of from [3840×2160; 60p] to [3840×2160; 25p] or from [1920×1080; 120p] to [1920×1080; 100p] is selected for [Frame size/frame rate] in the video recording menu.
Selecting [ON] for [Film grain options] > [Film grain] in the video recording menu disables [Skin softening] in the video recording menu.

New Menu Item: “Film Grain Options”

Opsi Mode Rilis Baru: “C15”
[C15] has been added to [Release mode] in the photo shooting menu. You can shoot using high-speed frame capture + at 15 frames per second.
The same restrictions apply to [C15] as those for [C30].

Opsi Mode Rilis Baru: “C15”

Subject Detection Focus Point Now Displayed with Hi-Res Zoom
Selecting [ON] for [Hi-Res Zoom] in the video recording menu displays a focus point on the detected subject in the shooting display.
If autofocus is enabled, this feature takes effect when you select an option other than [Subject detection off] for [AF/MF subject detection options] > [Subject detection] in the video recording menu. While using manual focus, this feature takes effect when you select an option other than [Subject detection off] for [AF/MF subject detection options] > [Subject detection] and you select an option other than [MF subject detection off] for [MF subject detection area] in the video recording menu.

Subject Detection Focus Point Now Displayed with Hi-Res Zoom

Separate “Record Camera Orientation” Settings Available for Photos and Videos in the Playback Menu
The [Record camera orientation] item in the playback menu now has separate [ON] and [OFF] options for photography and video recording.

Separate “Record Camera Orientation” Settings

Available for Photos and Videos in the Playback

“Only During Zoom” Added to Custom Setting a12 “Focus Peaking”
[Only during zoom] has been added to Custom Setting a12 [Focus peaking]. When set to [ON], focus peaking is displayed only while the view through the lens is zoomed in.

“Only During Zoom” Added to Custom Setting a12 “Focus Peaking”

Pengaturan Kustom Baru: a13 “Tingkat Bukaan Maksimum”
Item [Lv Apertur Maksimum] telah ditambahkan ke menu Pengaturan Kustom di posisi a13. Bila diatur ke [Aktif], tampilan pemotretan di viewFinder atau monitor selalu ditampilkan dengan aperture maksimum. Saat Anda menekan tombol rana sepenuhnya, aperture akan menyesuaikan dengan nilai aperture yang dikonfigurasi sebelum memotret.
D Perhatian: Saat “Maximum Aperture Lv” Diatur ke “On”
Lensa akan selalu berada pada aperture maksimum, berapa pun pengaturan aperture-nya. Hindari mengarahkan kamera ke matahari atau sumber cahaya terang lainnya. Kegagalan mematuhi tindakan pencegahan ini dapat merusak sirkuit internal kamera. Waktu pelepasan rana mungkin sedikit tertunda. Penundaan waktu pelepasan rana lebih mungkin terjadi ketika [Mode senyap] diatur ke [ON] di menu pengaturan. Kedipan mungkin muncul pada tampilan pemotretan dalam kondisi berikut: – tepat sebelum atau setelah rana dilepaskan, atau – saat menekan kontrol yang ditetapkan sebagai [Mode Pra-rana].view] di Pengaturan Kustom f2 [Kontrol Kustom
(penembakan)].

Pengaturan Kustom Baru: a13 “Tingkat Bukaan Maksimum”

Pengaturan Kustom Baru: a15 “Pengaturan Pembatas Fokus”

A [Focus limiter setting] item has been added to the Custom Settings menu at position a15. You can now limit the camera autofocus to the selected range.

Pilihan

Keterangan

Select [ON] to limit the camera autofocus to the range selected with [Limit range].

[Pembatas fokus]

Tampilan pemotretan menunjukkan ikon batas fokus saat [ON] dipilih.

[Batas jangkauan]

Specify the camera autofocus range. Select [Nearest] for the minimum distance and [Farthest] for the maximum distance. Set the distance values between 0.1 and 999 m.

D “Focus Limiter Setting”
You can use the [Focus limiter setting] feature when a Z mount lens is attached.

14 Pengaturan Kustom Baru: a15 “Pengaturan Pembatas Fokus”

Membatasi Jangkauan Fokus
Select the near and far limits of the camera autofocus range.
1 Sorot [Batasi jangkauan] dan tekan 2.
Layar pengaturan jangkauan akan muncul. Target titik fokus akan muncul di layar pengaturan jangkauan.

2 Pilih jarak fokus minimum dan maksimum.
Place the focus point over a subject at the nearest distance and press the A (g) button to set the minimum distance. Rotate the main command dial or keep the A (g) button pressed while rotating the lens focus ring to fine-tune the minimum distance.
Posisikan titik fokus pada subjek pada jarak terjauh dan tekan tombol rana setengah untuk mengatur jarak maksimum. Putar kenop sub-perintah atau tekan terus tombol rana setengah sambil memutar cincin fokus lensa untuk menyempurnakan jarak maksimum.

Target titik fokus

Tip: Supported Distances for “Nearest” and “Farthest” We recommend that you configure [Nearest] and [Farthest] within the range of values indicated by the numbers in white. Setting these options to the values indicated in yellow may reduce the accuracy with which the camera can detect the distance to the subject, resulting in the camera focusing outside of the set range or autofocus becoming unavailable.

15 Pengaturan Kustom Baru: a15 “Pengaturan Pembatas Fokus”

3 Tekan J.
Akhiri pengaturan jangkauan dan kembali ke tampilan pemotretan.
D Perhatian: Mengganti Lensa
Mengganti lensa yang digunakan untuk mengatur [Batas rentang] ke lensa lain akan menonaktifkan rentang fokus yang telah ditetapkan. Atur ulang pengaturan [Batas rentang] untuk menggunakan fungsi pembatas fokus dengan lensa baru. Jika pengaturan [Batas rentang] tidak diatur ulang dengan lensa baru, memasang kembali lensa asli memungkinkan pemfokusan dalam rentang fokus yang telah ditetapkan.
D Menggunakan Lensa dengan Sakelar Batas Fokus
Bila menggunakan lensa dengan sakelar batas fokus untuk pengaturan [Batas jangkauan], atur sakelar batas fokus lensa ke PENUH.
Mengatur Ulang Rentang Fokus
Tekan tombol O untuk mengatur ulang nilai yang ditetapkan untuk [Terdekat] dan [Terjauh].
16 Pengaturan Kustom Baru: a15 “Pengaturan Pembatas Fokus”

“Minimum” Ditambahkan ke Pengaturan Kustom c2 “Pengatur Waktu Sendiri” > “Interval Antar Jepretan”
[Minimum] telah ditambahkan ke Pengaturan Kustom c2 [Pengatur Waktu] > [Interval antar bidikan]. Memilih [Minimum] memungkinkan pengatur waktu mengambil gambar dengan interval kurang dari 0.5 detik ketika [Jumlah bidikan] lebih dari 1.

“Minimum” Ditambahkan ke Pengaturan Kustom c2 “Selftimer” > “Interval Antar Jepretan”

New Options for Custom Settings d16/g14 “Grid Type”
Grid type options have been added to Custom Settings d16 and g14 [Grid type]: [4:3] added to Custom Setting d16 [Grid type]. [9:16] added to Custom Setting g14 [Grid type].

New Options for Custom Settings d16/g14 “Grid Type”

Opsi Baru untuk Pengaturan Kustom f2 “Kontrol Kustom (Pemotretan)” dan g2 “Kontrol Kustom”
Peran tambahan sekarang tersedia untuk Pengaturan Kustom f2 [Kontrol kustom (penembakan)] dan g2 [Kontrol kustom].

New Roles Available via Custom Settings f2 “Custom Controls (Shooting)” and g2 “Custom Controls”

Pilihan

Keterangan

X [Pembatas fokus]

Tekan kontrol untuk beralih antara [ON] dan [OFF] untuk Kustom
Pengaturan a15 [Pengaturan pembatas fokus] > [Pembatas fokus]. Tahan
kontrol untuk melompat ke tampilan pengaturan [Batas jangkauan] ( 0 14).

M [Mode monitor siklus] Tekan kontrol untuk beralih di antara mode monitor.

G [Film grain]

Press the control and rotate a command dial to toggle between
[ON] and [OFF] for [Film grain options] > [Film grain] in the photo
shooting or video recording menu ( 0 7).

Opsi Baru untuk Pengaturan Kustom f2 “Kontrol Kustom (Pemotretan)” dan g2 “Kontrol Kustom”

Exposure Compensation and ISO Sensitivity Are Now Assignable to Command Dials in Mode M
Exposure compensation (E) and ISO sensitivity (S) for video recording can now be assigned to the command dials in mode M using Custom Setting g2 [Custom controls] > [Command dials] > [Exposure setting].
To set main and sub-command dial roles, select mode M in the [Exposure setting] dialog and press DISP. Press 4 or 2 to highlight a command dial and 1 or 3 to select roles. Use the command dials to adjust the exposure compensation or ISO sensitivity settings when either function is assigned to a control and the exposure compensation or ISO sensitivity dial is set to C. If you assigned roles other than aperture to the command dials, use touch controls to adjust aperture.

Opsi Baru untuk Pengaturan Kustom f2 “Kontrol Kustom (Pemotretan)” dan g2 “Kontrol Kustom”

Changes to Setup Menu “Camera Sounds” Options

New options have been added to the [Camera sounds] item in the setup menu. Shutter sound volume can now be set separately from other electronic sounds.

Pilihan

Keterangan

[Shutter sound]

If [ON] is selected, the camera will make a sound when the shutter is released during high-speed frame capture + or pixel shift shooting.

[Volume]

Choose the volume of the electronic shutter sound from a total of three options.

[Berbunyi]

Same as the [Beep on/off] function in earlier versions of the camera firmware. If you select [On] or [Off (touch controls only)], beeps will sound when: – the self-timer counts down, – interval-timer photography, time-lapse video recording, focus shift, or
pixel shift ends, – the camera focuses in photo mode (note that this does not apply if AF-C
is selected for focus mode or if [Release] is selected for Custom Setting a2 [AF-S priority selection]), or – touch controls are used (but note that beeps will not sound for touch controls if [Off (touch controls only)] is selected). Select [Off] to mute the beep speaker.

[Volume]

Choose from three options for beep volume.

[Pitch]

Choose the pitch of the beep from [High] and [Low].

Changes to Setup Menu “Camera Sounds” Options

Metode Baru untuk Menambahkan Kontrol Gambar dari Nikon Imaging Cloud

Jika semua kondisi berikut terpenuhi, menekan tombol G untuk menampilkan menu akan menampilkan dialog konfirmasi yang menanyakan apakah Anda ingin menambahkan Kontrol Gambar ke kamera Anda:
Kamera terhubung ke Nikon Imaging Cloud. Anda telah memilih Kontrol Gambar di Nikon Imaging Cloud untuk ditambahkan ke kamera Anda yang belum terdaftar.

Pilihan

Keterangan

[Ya]

Saat Anda menghubungkan kamera ke Nikon Imaging Cloud, Kontrol Gambar akan dikirim dari Nikon Imaging Cloud dan diimpor ke kamera Anda. Kontrol Gambar yang diimpor ini belum akan ditampilkan di kamera. Memilih [Ya] akan mendaftarkan Kontrol Gambar yang diimpor ke kamera dan menambahkannya ke daftar [Atur Kontrol Gambar].

[Tidak]

Kontrol Gambar yang dikirim dari Nikon Imaging Cloud dan diimpor ke kamera Anda tidak akan terdaftar di kamera; sebagai gantinya, kamera akan kembali ke menu. Dalam hal ini, tanda notifikasi akan muncul di tab menu pemotretan dan perekaman video serta di item [Atur Kontrol Gambar] di menu kamera.
Untuk mendaftarkan Kontrol Gambar secara manual ke kamera, pilih [Atur Kontrol Gambar] > [Tambah Kontrol Gambar Cloud] file[s] di menu pemotretan atau perekaman video. Jika Anda memilih [Tidak], dialog konfirmasi tidak akan muncul saat menu ditampilkan berikutnya. Namun, memilih Kontrol Gambar baru untuk ditambahkan ke kamera di Nikon Imaging Cloud akan menampilkan dialog konfirmasi.

Metode Baru untuk Menambahkan Kontrol Gambar dari Nikon Imaging Cloud

Item Menu Pengaturan Baru: “Pengalih Tampilan Monitor Otomatis”
Item [Pengalihan tampilan monitor otomatis] telah ditambahkan ke menu pengaturan. Memilih [Aktif] akan menghasilkan perilaku yang sama seperti pada versi firmware kamera sebelumnya. Memilih [Aktif (saat monitor terpasang)] akan menonaktifkan pengalihan otomatis viewpencari dan monitor ditampilkan saat monitor terbuka dan tidak dalam posisi penyimpanan. Menempatkan mata Anda ke viewpenemu tidak akan memutar viewpencari aktif; monitor selalu digunakan untuk pengambilan gambar.

Item Menu Pengaturan Baru: “Pengalih Tampilan Monitor Otomatis”

New Smart Device Connection Method: “Wi-Fi Connection (STA Mode)”
Wi-Fi station mode has been added as a connection method, allowing you to connect the camera to the smart device via a wireless LAN access point. The existing method of connecting the camera and the smart device directly has been renamed Wi-Fi access point mode.
A compatible version of SnapBridge is required to establish connections in Wi-Fi station mode and Wi-Fi access point mode. Be sure to use the latest version of the SnapBridge app. Some operations are performed using the camera, others on the smart device. Additional instructions are available via SnapBridge online help.
Tip: NX MobileAir NX MobileAir app also supports Wi-Fi station mode. See NX MobileAir online help for information on connecting and using the NX MobileAir app with the camera.
Connecting to an Existing Network (Wi-Fi Station Mode)
The camera connects to a smart device on an existing network (including home networks) via a wireless LAN access point. The smart device can still connect to the Internet while connected to the camera.
D Wi-Fi Station Mode
Connection to smart devices beyond the local area network is not supported. You can connect only to smart devices on the same network.

New Smart Device Connection Method: “Wi-Fi Connection (STA Mode)”

1 Camera: Select [Connect to smart device] > [Wi-Fi
connection (STA mode)] in the network menu, then highlight [Create profile] dan tekan J.
2 Camera: Name the new profile.
To proceed to the next step without changing the default name, press X. Whatever name you choose will appear in the network menu [Connect to smart device] > [Wi-Fi connection (STA mode)] list. To rename the profile, press J.

New Smart Device Connection Method: “Wi-Fi Connection (STA Mode)”

3 Camera: Highlight [Pencarian untuk [Jaringan Wi-Fi] dan tekan J.
Kamera akan mencari jaringan yang saat ini aktif di sekitar dan mencantumkannya berdasarkan nama (SSID).
D “Koneksi Mudah”
Untuk terhubung tanpa memasukkan SSID atau kunci enkripsi, tekan X pada Langkah 3. Selanjutnya, sorot salah satu opsi berikut dan tekan J. Setelah terhubung, lanjutkan ke Langkah 6.

Pilihan

Keterangan

[Tombol tekan WPS]

Untuk router yang mendukung WPS tombol tekan. Tekan tombol WPS pada router, lalu tekan tombol J kamera untuk menghubungkan.

[PIN-entri WPS]

Kamera akan menampilkan PIN. Gunakan komputer untuk memasukkan PIN pada router. Untuk informasi selengkapnya, lihat dokumentasi yang disertakan dengan router.

New Smart Device Connection Method: “Wi-Fi Connection (STA Mode)”

4 Camera: Choose a network.
Highlight a network SSID and press J. The band on which each SSID operates is indicated by an icon. Encrypted networks are indicated by a h icon. If the selected network is encrypted (h), you will be prompted to enter the encryption key. If the network is not encrypted, proceed to Step 6. If the desired network is not displayed, press X to search again.
D SSID Tersembunyi
Jaringan dengan SSID tersembunyi ditunjukkan dengan entri kosong dalam daftar jaringan.
Untuk terhubung ke jaringan dengan SSID tersembunyi, sorot entri kosong dan tekan J. Selanjutnya, tekan J; kamera akan meminta Anda memasukkan SSID. Masukkan nama jaringan dan tekan X. Tekan X lagi; kamera sekarang akan meminta Anda memasukkan kunci enkripsi.

New Smart Device Connection Method: “Wi-Fi Connection (STA Mode)”

5 Camera: Enter the encryption key.
Tekan J dan masukkan kunci enkripsi untuk router nirkabel.
For more information on the wireless router encryption key, see the documentation for the wireless router. Press X when entry is complete.
Tekan X lagi untuk memulai koneksi. Sebuah pesan akan ditampilkan selama beberapa detik saat koneksi berhasil dibuat.

New Smart Device Connection Method: “Wi-Fi Connection (STA Mode)”

6 Camera: Obtain or select an IP address.
Sorot salah satu pilihan berikut dan tekan J.

Pilihan

Keterangan

[Dapatkan secara otomatis]

Pilih opsi ini jika jaringan dikonfigurasi untuk memberikan alamat IP secara otomatis. Pesan "konfigurasi selesai" akan ditampilkan setelah alamat IP ditetapkan.

[Masukkan secara manual]

Enter the IP address and sub-net mask manually. Press J; you will be prompted to enter the IP address. Rotate the main command dial to highlight segments. Press 4 or 2 to change the highlighted segment and press J to proceed. Next, press X; a “configuration complete” message will be displayed. Press X again to display the sub-net mask. Press 1 or 3 to edit the sub-net mask and press J; a “configuration complete” message will be displayed.

7 Camera: Press J to proceed when the “configuration complete” message is displayed.
8 Camera: Start a Wi-Fi connection with the smart device.
When prompted, launch the SnapBridge app on the smart device.

9 Smart device: Launch the SnapBridge app, open the
Mode Connection].

tab, tap , and select [Wi-Fi STA

If this is the first time you have launched the app, you should instead tap [Connect to camera] in the welcome display.

New Smart Device Connection Method: “Wi-Fi Connection (STA Mode)”

10 Smart device: Select the camera.
Select the camera name displayed on the camera in Step 8.
11 Camera/smart device: Establish the Wi-Fi connection.
When the camera displays the dialog as shown, press J.
After establishing a Wi-Fi connection to the camera, the smart device will display Wi-Fi station mode options. The camera will display a message stating that the connection is complete.
The camera and smart device are now connected via Wi-Fi. For information on using the SnapBridge app, see online help.

New Smart Device Connection Method: “Wi-Fi Connection (STA Mode)”

Direct Wireless Connection to a Smart Device (WiFi Access Point Mode)
Connect the camera and a smart device directly via Wi-Fi. The camera acts as a wireless LAN access point, allowing you to connect when working outdoors and in other situations in which the smart device is not already connected to a wireless network and eliminating the need for complicated adjustments to settings. The smart device cannot connect to the Internet while connected to the camera.

1 Smart device: Launch the SnapBridge app, open the
Mode Connection].

tab, tap , and select [Wi-Fi AP

If this is the first time you have launched the app, you should instead tap [Connect to camera] in the welcome display. When prompted, tap the category for your camera and then tap the “WiFi” option when prompted to choose the connection type.

2 Camera/smart device: Turn the camera on when prompted.
Do not use any of the controls in the app at this point.

3 Camera: Select [Connect to smart device] > [Wi-Fi
connection (AP mode)] in the network menu, then highlight [Establish Wi-Fi connection] and press J.

The camera SSID and password will be displayed.

New Smart Device Connection Method: “Wi-Fi Connection (STA Mode)”

4 Smart device: Follow the on-screen instructions to establish a Wi-Fi connection.
On iOS devices, the “Settings” app will launch. Tap [< Settings] to open [Settings], then scroll up and tap [WiFi] (which you’ll find near the top of the settings list) to display Wi-Fi settings.

In the Wi-Fi settings display, select the camera SSID and enter the password displayed by the camera in Step 3.
5 Smart device: After adjusting device settings as described in Step 4, return to the
SnapBridge app.
After establishing a Wi-Fi connection to the camera, the smart device will display Wi-Fi access point mode options. The camera will display a message stating that the connection is complete.

The camera and smart device are now connected via Wi-Fi. For information on using the SnapBridge app, see online help.
Terminating Wi-Fi Station/Wi-Fi Access Point Mode
To end the Wi-Fi connection, tap in the SnapBridge tab. After the icon changes to , tap , and select [Exit Wi-Fi STA mode] or [Exit Wi-Fi AP mode].

New Smart Device Connection Method: “Wi-Fi Connection (STA Mode)”

Opsi Baru untuk “USB” di Menu Jaringan: “Streaming USB (UVC/UAC)”
[Streaming USB (UVC/UAC)] telah ditambahkan ke [USB] di menu jaringan. Anda dapat menggunakan perangkat lunak streaming langsung dan web aplikasi konferensi di komputer atau perangkat pintar yang terhubung ke kamera melalui kabel USB yang disediakan untuk melakukan streaming langsung video dan audio yang direkam dengan kamera.
1 Kamera: Pilih [USB] di menu jaringan, sorot [USB]
streaming (UVC/UAC)], lalu tekan J.
2 Hubungkan kamera dan komputer/perangkat pintar menggunakan kabel USB yang disediakan.

Kamera akan memasuki mode siaga streaming, dan
Pesan yang meminta Anda untuk memulai streaming dan ikon U akan ditampilkan di layar pengambilan gambar. Layar pengambilan gambar mode video akan tetap muncul terlepas dari pengaturan pemilih foto/video. Pengaturan mode video, termasuk white balance dan Picture Control, akan diterapkan ke gambar streaming.

Opsi Baru untuk “USB” di Menu Jaringan: “Streaming USB (UVC/UAC)”

3 Komputer/perangkat pintar: Mulai streaming melalui aplikasi streaming langsung.
Kamera akan mulai streaming dan ikon aw akan ditampilkan di layar pemotretan.
Streaming video dihasilkan sebagai berikut. – Ukuran bingkai/kecepatan bingkai: 1080/60p, 1080/30p, 720/60p, 720/30p (pengaturan tersedia di
aplikasi/perangkat lunak bervariasi tergantung pada model dan spesifikasi komputer atau perangkat pintar) – Format video: MJPEG – Format audio: PCM, 16-bit, stereo
D Perhatian: Streaming Langsung
Instal perangkat lunak streaming langsung atau web Aplikasi konferensi di komputer/perangkat pintar Anda sebelumnya. Streaming akan berakhir secara otomatis jika: – [USB] di menu jaringan berubah dari [Streaming USB (UVC/UAC)], – kabel USB dicabut untuk mengakhiri koneksi, atau – kamera dimatikan. Beberapa fungsi dan pengaturan tidak dapat digunakan saat streaming, termasuk: – perekaman video, – zoom tampilan, – koneksi HDMI, – komunikasi dengan komputer/perangkat pintar selain perangkat lunak streaming (misalnya
example, using software such as NX Studio), – time-lapse video recording, and – focus shift. Some menus can be set while streaming, but a gray image will be streamed while operating the menu. Depending on the operating system or model of the computer or smart device, you may need a connection application/software in addition to the application/software used for streaming. We do not guarantee that streaming is available with all computers/smart devices.

Opsi Baru untuk “USB” di Menu Jaringan: “Streaming USB (UVC/UAC)”

Spesifikasi Pasca-Pemutakhiran untuk Versi Firmware “C” 3.00

Nikon Z f Digital Camera

Jenis

Digital camera with support for interchangeable lenses

Dudukan lensa

dudukan Nikon Z

Lensa

Lensa yang kompatibel

Lensa NIKKOR dudukan Z Lensa NIKKOR dudukan F (diperlukan adaptor dudukan; mungkin ada batasan)

Piksel efektif

24.5 juta

Sensor gambar

Jenis

35.9 × 23.9 mm CMOS sensor (full-frame/FX-format)

Jumlah piksel

25.28 juta

Dust-reduction system

Image sensor cleaning, Image Dust Off reference data (requires NX Studio)

Spesifikasi Pasca-Pemutakhiran untuk Versi Firmware “C” 3.00

Penyimpanan Ukuran gambar (piksel) File format (kualitas gambar)

[FX (36 × 24)] dipilih untuk area gambar: – 6048 × 4032 (Besar: 24.4 M) – 4528 × 3024 (Sedang: 13.7 M) – 3024 × 2016 (Kecil: 6.1 M) [DX (24 × 16)] dipilih untuk area gambar: – 3984 × 2656 (Besar: 10.6 M) – 2976 × 1992 (Sedang: 5.9 M) – 1984 × 1328 (Kecil: 2.6 M) [1:1 (24 × 24)] dipilih untuk area gambar: – 4032 × 4032 (Besar: 16.3 M) – 3024 × 3024 (Sedang: 9.1 M) – 2016 × 2016 (Kecil: 4.1 M) [16:9 (36 × 20)] dipilih untuk area gambar: – 6048 × 3400 (Besar: 20.6 M) – 4528 × 2544 (Sedang: 11.5 M) – 3024 × 1696 (Kecil: 5.1 M)
NEF (RAW): 14 bit; choose from lossless compression, high efficiencym, and high efficiency options JPEG: JPEG-Baseline compliant with fine (approx. 1: 4), normal (approx. 1: 8), or basic (approx. 1: 16) compression; size-priority and optimal-quality compression available HEIF: Supports fine (approx. 1: 4), normal (approx. 1: 8), or basic (approx. 1: 16) compression; size-priority and optimal-quality compression available NEF (RAW)+JPEG: Single photograph recorded in both NEF (RAW) and JPEG formats NEF (RAW)+HEIF: Single photograph recorded in both NEF (RAW) and HEIF formats

Spesifikasi Pasca-Pemutakhiran untuk Versi Firmware “C” 3.00

Storage Picture Control System
Media Slot kartu ganda File sistem

Auto, Standard, Neutral, Vivid, Monochrome, Flat Monochrome, Deep Tone Monochrome, Portrait, Rich Tone Portrait, Landscape, Flat, Creative Picture Controls (Dream, Morning, Pop, Sunday, Somber, Dramatic, Silence, Bleached, Melancholic, Pure, Denim, Toy, Sepia, Blue, Red, Pink, Charcoal, Graphite, Binary, Carbon); selected Picture Control can be modified; storage for custom Picture Controls
Choice of Picture Controls is restricted to Standard, Monochrome, and Flat when HLG is selected for tone mode during still photography. Flexible Color settings created with NX Studio can be imported to the camera.
SD (Secure Digital), SDHC, and SDXC memory cards (SDHC and SDXC memory cards are UHSII compliant), and microSD, microSDHC, and microSDXC memory cards (microSDHC and microSDXC memory cards are UHSI compliant)
Kartu mana pun dapat digunakan untuk penyimpanan berlebih atau cadangan, untuk penyimpanan terpisah gambar NEF (RAW) dan JPEG atau HEIF, atau untuk penyimpanan gambar JPEG atau HEIF duplikat dengan ukuran dan kualitas gambar berbeda; gambar dapat disalin antar kartu.
DCF 2.0, Exif 2.32, MPEGA MIAF

Spesifikasi Pasca-Pemutakhiran untuk Versi Firmware “C” 3.00

Viewpenemu
Viewpenemu
Frame coverage Magnification Eyepoint Diopter adjustment Eye sensor Monitor
Memantau

1.27-cm/0.5-in. approx. 3690k-dot (Quad VGA) OLED electronic viewfinder with color balance and auto and 13-level manual brightness controls
Approx. 100% horizontal and 100% vertical Approx. 0.8× (50 mm lens at infinity, -1.0 m-1) 21 mm (-1.0 m-1; from rearmost surface of viewfinder eyepiece lens) -4 +2 m-1
Secara otomatis beralih antara monitor dan viewtampilan pencari
Layar LCD sentuh TFT vari-angle 8 cm/3.2 inci, sekitar 2100k titik dengan sudut 170° viewsudut pengambilan gambar, cakupan bingkai sekitar 100%, dan keseimbangan warna serta kontrol kecerahan manual 15 tingkat

Spesifikasi Pasca-Pemutakhiran untuk Versi Firmware “C” 3.00

rana

Jenis

Rana mekanis bidang fokus perjalanan vertikal yang dikontrol secara elektronik; rana tirai depan elektronik; rana elektronik

Kecepatan

Accessible via shutter speed dial: ¹/4 s in steps of 1 EV, Bulb, Time, X (flash sync) Accessible via main command dial: ¹/30 s in steps of ¹/ EV (extendable to 900 s in mode M), Bulb, Time, X (flash sync)

Kecepatan sinkronisasi flash

X=¹/ s; flash synchronizes with shutter at speeds of ¹/ s or slower; faster sync speeds are supported with auto FP high-speed sync

Melepaskan

Mode rilis

Bingkai tunggal, kecepatan rendah berkelanjutan, kecepatan tinggi berkelanjutan, kecepatan tinggi berkelanjutan (diperpanjang), pengambilan bingkai kecepatan tinggi + dengan Pengambilan Pra-Rilis, pengatur waktu otomatis

Perkiraan laju kemajuan bingkai *

Continuous low-speed: Approx. 17 fps Continuous high-speed: Approx. 7.8 fps Continuous high-speed (extended): Approx. 14 fps High-speed frame capture + (C15): Approx. 15 fps High-speed frame capture + (C30): Approx. 30 fps * Maximum frame advance rate as measured by in-house tests.

Pengatur waktu

2 detik, 5 detik, 10 detik, 20 detik; 1 eksposur pada interval minimum, 9, 0.5, 1, atau 2 detik

Spesifikasi Pasca-Pemutakhiran untuk Versi Firmware “C” 3.00

Sistem Pengukuran Paparan
Mode pengukuran
Rentang * Mode Kompensasi pencahayaan Kunci pencahayaan
Sensitivitas ISO (Indeks Pencahayaan yang Direkomendasikan)
Pencahayaan Aktif Pencahayaan ganda Opsi lainnya

Pengukuran TTL menggunakan sensor gambar kamera
Pengukuran matriks Pengukuran bobot tengah: Bobot 75% diberikan pada lingkaran 12 atau 8 mm di tengah bingkai atau pembobotan dapat didasarkan pada rata-rata seluruh bingkai Pengukuran titik: Meter lingkaran dengan diameter sekitar 4 mm yang berpusat pada titik fokus yang dipilih Pengukuran bobot sorotan
-4+17 EV * Figures are for ISO 100 and f/2.0 lens at 20 °C/68 °F
b: otomatis, P: otomatis terprogram dengan program fleksibel, S: otomatis prioritas rana, A: otomatis prioritas apertur, M: manual
-3+3 EV (-5+5 EV when exposure compensation dial is rotated to C) in steps of ¹/ EV
Luminositas dikunci pada nilai yang terdeteksi
ISO 100 (pilih dari ukuran langkah ¹/ dan 64000 EV); juga dapat diatur ke sekitar 1, 0.3, atau 0.7 EV (setara ISO 1) di bawah ISO 50 atau ke sekitar 100, 0.3, 0.7, atau 1 EV (setara ISO 1.7) di atas ISO 204800; kontrol sensitivitas ISO otomatis tersedia * Catatan: Sensitivitas ISO dibatasi hingga 64000 saat HLG
dipilih untuk mode nada.
Otomatis, Ekstra tinggi, Tinggi, Normal, Rendah, dan Mati
Tambahkan, ratakan, terangkan, gelapkan
HDR overlay, photo mode flicker reduction

Spesifikasi Pasca-Pemutakhiran untuk Versi Firmware “C” 3.00

Jenis Fokus Otomatis Jangkauan Deteksi *
Lensa servo
Titik fokus *
AF-area mode Focus lock Vibration reduction (VR) Camera on-board VR Lens on-board VR

AF deteksi fase/kontras hibrida dengan bantuan AF
-10+19 EV * Measured in photo mode at ISO 100 and a temperature of
20 °C/68 °F using single-servo AF (AFS) and a lens with a maximum aperture of f/1.2
Autofocus (AF): Single-servo AF (AF-S); continuous-servo AF (AF-C); full-time AF (AF-F; available only in video mode); predictive focus tracking Manual focus (M): Electronic rangefinder can be used
273 focus points * Number of focus points available in photo mode with single-
point AF selected for AF-area mode and FX selected for image area
Pinpoint (hanya tersedia dalam mode foto), titik tunggal, area dinamis (S, M, dan L; hanya tersedia dalam mode foto), area lebar (S, L, C1, dan C2), dan AF area otomatis; pelacakan 3D (hanya tersedia dalam mode foto); AF pelacakan subjek (hanya tersedia dalam mode video)
Focus can be locked by pressing shutter-release button halfway (single-servo AF/AFS) or by pressing the A (g) button
Pergeseran sensor gambar 5-sumbu
Pergeseran lensa (tersedia dengan lensa VR)

Spesifikasi Pasca-Pemutakhiran untuk Versi Firmware “C” 3.00

Kilatan

Kontrol lampu kilat

TTL: i-TTL flash control; i-TTL balanced fill-flash is used with matrix, center-weighted, and highlight-weighted metering, standard i-TTL fill-flash with spot metering

Mode lampu kilat

Sinkronisasi tirai depan, sinkronisasi lambat, sinkronisasi tirai belakang, pengurangan mata merah, pengurangan mata merah dengan sinkronisasi lambat, mati

Kompensasi kilat

-3+1 EV in steps of ¹/ EV

Flash-ready indicator

Menyala ketika unit lampu kilat opsional terisi penuh; berkedip sebagai peringatan kekurangan pencahayaan setelah lampu kilat menyala pada daya penuh

Sepatu aksesori

Hot-shoe ISO 518 dengan kontak sinkronisasi dan data serta kunci pengaman

Sistem Pencahayaan Kreatif Nikon (CLS)

i-TTL flash control, optical Advanced Wireless Lighting, modeling illumination, FV lock, Color Information Communication, auto FP high-speed sync

Keseimbangan putih

Otomatis (3 jenis), cahaya alami otomatis, sinar matahari langsung, berawan, teduh, pijar, fluoresen (3 jenis), lampu kilat, pilih suhu warna (2500-10,000 K), prasetel manual (dapat disimpan hingga 6 nilai), semua dengan penyetelan halus

tanda kurung

Eksposur dan/atau flash, white balance, dan ADL

Pilihan lain untuk fotografi diam

Vignette control, diffraction compensation, auto distortion control, skin softening, portrait impression balance, film grain, and intervaltimer, focus-shift, and pixel-shift photography

Spesifikasi Pasca-Pemutakhiran untuk Versi Firmware “C” 3.00

Video Metering system Metering mode
Ukuran bingkai (piksel) dan kecepatan bingkai
File format Video compression Audio recording format Audio recording device Exposure compensation
Sensitivitas ISO (Indeks Pencahayaan yang Direkomendasikan)

Pengukuran TTL menggunakan sensor gambar kamera
Matriks, pembobotan tengah, atau pembobotan sorotan
3840 × 2160 (4K UHD): 60p/50p/30p/25p/24p 1920 × 1080: 120p/100p/60p/50p/30p/25p/24p 1920 × 1080 (slow-motion): 30p ×4 (slow-motion)/25p ×4 (slowmotion)/24p ×5 (slow-motion) * Note: Actual frame rates for 120p, 100p, 60p, 50p, 30p, 25p, and 24p are 119.88, 100, 59.94, 50, 29.97, 25, and 23.976 fps respectively.
MOV, MP4
H.265/HEVC (8 bit/10 bit), H.264/AVC (8 bit)
Linear PCM (48 KHz, 24 bit, for videos recorded in MOV format) or AAC (48 KHz, 16 bit, for videos recorded in MP4 format)
Built-in stereo or external microphone with attenuator option; sensitivity adjustable
-3+3 EV in steps of ¹/ EV
Mode M: Manual selection (ISO 10051200; choose from step sizes of ¹/, ¹/, and 1 EV); with additional options available equivalent to approximately 0.3, 0.7, 1, or 2 EV (ISO 204800 equivalent) above ISO 51200; auto ISO sensitivity control (ISO 100Hi 2.0) available with selectable upper limit Modes P, S, A: Auto ISO sensitivity control (ISO 100Hi 2.0) with selectable upper limit b mode: Auto ISO sensitivity control (ISO 10051200) * Note: ISO sensitivity is limited to 40051200 when HLG is selected for tone mode.

Spesifikasi Pasca-Pemutakhiran untuk Versi Firmware “C” 3.00

Video Active DLighting
Other options for video recording
Pemutaran ulang
Pemutaran ulang
Interface USB HDMI output Audio input Audio output

Ekstra tinggi, Tinggi, Normal, Rendah, dan Mati
Time-lapse video recording, electronic vibration reduction, time codes, N-Log and HDR (HLG) video, wave-form display, red REC frame indicator, video recording display zoom (50%, 100%, 200%, and 400%), and extended shutter speeds (modes S and M); option to view video recording info available via i menu; Hi-Res Zoom
Full-frame and thumbnail (up to 4, 9, or 72 pictures) playback with playback zoom, playback zoom cropping, video playback, slide shows, histogram display, highlights, photo information, location data display, auto picture rotation, picture rating, voice memo recording and playback, IPTC information embedding and display, filtered playback, skip to first shot in series, series playback, save consecutive frames, and motion blend
Konektor USB SuperSpeed Tipe-C; disarankan untuk menghubungkan ke port USB internal
Type D HDMI connector
Stereo mini-pin jack (3.5 mm diameter; plug-in power supported)
Soket mini-pin stereo (diameter 3.5 mm)

Spesifikasi Pasca-Pemutakhiran untuk Versi Firmware “C” 3.00

Wi-Fi/Bluetooth Wi-Fi Bluetooth

Standards: – IEEE 802.11b/g/n (Africa, Asia, and Oceania) – IEEE 802.11b/g/n/a/ac (Europe, Americas) Operating frequency: – 24122462 MHz (channel 11; Africa, Asia, and Oceania) – 24122462 MHz (channel 11) and 51805825 MHz
(51805580 MHz, 56605700 MHz, and 57455825 MHz) (U.S.A.,Canada, Mexico) – 24122462 MHz (channel 11) and 51805805 MHz (5180 5320 MHz and 57455805 MHz) (other countries in the Americas) – 24122462 MHz (channel 11) and 57455805 MHz (Georgia) – 24122462 MHz (channel 11) and 51805320 MHz (other European countries) Maximum output power (EIRP): – 2.4 GHz band: 6.1 dBm – 5 GHz band: 9.4 dBm Authentication: Open system, WPA2-PSK, WPA3-SAE
Communication protocols: Bluetooth Specification version 5.0 Operating frequency: – Bluetooth: 24022480 MHz – Bluetooth Low Energy: 24022480 MHz Maximum output power (EIRP): – Bluetooth: 0.6 dBm – Bluetooth Low Energy: -0.9 dBm

Spesifikasi Pasca-Pemutakhiran untuk Versi Firmware “C” 3.00

Sumber daya Baterai
AC adapter Tripod socket Tripod socket

Satu baterai Li-ion isi ulang ENEL15c * * Baterai ENEL15b dan ENEL15a dapat digunakan sebagai pengganti
ENEL15c. Namun, perlu diketahui bahwa jumlah foto yang dapat diambil dengan sekali pengisian daya lebih sedikit dibandingkan dengan ENEL15c. Adaptor AC EH-8P hanya dapat digunakan untuk mengisi daya baterai ENEL15c dan ENEL15b.
EH7P charging AC adapters (available separately) EH-8P AC adapters (available separately); require supplied USB cable featuring Type-C connectors at both ends
0.635 cm (¹/ inci, ISO 1222)

Spesifikasi Pasca-Pemutakhiran untuk Versi Firmware “C” 3.00

Dimensions/weight Dimensions (W × H × D)
Berat
Lingkungan pengoperasian Suhu Kelembaban

Approx. 144 × 103 × 49 mm/5.7 × 4.1 × 2 in. Approx. 710 g (1 lb. 9.1 oz.) with battery and memory card but without body cap and accessory shoe cover; approx. 630 g/1 lb. 6.3 oz. (camera body only)
0 °C 40 °C (+32 °F104 °F) 85% or less (no condensation)

Kecuali dinyatakan lain, semua pengukuran dilakukan sesuai dengan standar atau pedoman Camera and Imaging Products Association (CIPA). Semua angka adalah untuk kamera dengan baterai yang terisi penuh. Di seluruh dokumen ini, "format FX" dan "FX" digunakan untuk merujuk pada sudut view setara dengan kamera format 35 mm (“full frame”) dan “format DX” dan “DX” dengan sudut view setara dengan kamera APS-C.ampGambar yang ditampilkan pada kamera dan gambar serta ilustrasi dalam dokumen ini hanya untuk tujuan penjelasan. Nikon berhak mengubah tampilan, spesifikasi, dan kinerja produk yang dijelaskan dalam dokumen ini kapan saja dan tanpa pemberitahuan sebelumnya. Nikon tidak bertanggung jawab atas kerusakan yang mungkin timbul akibat kesalahan apa pun yang mungkin terdapat dalam dokumen ini.

Spesifikasi Pasca-Pemutakhiran untuk Versi Firmware “C” 3.00

Indeks
Indeks

A
Automatic monitor display switch (0 23)

M
Maximum aperture Lv (0 13)

C
Camera sounds (0 21) Custom controls (0 19) Custom controls (shooting) (0 19)
F
Film grain options (0 7) Firmware version (0 4) Focus limiter setting (0 14) Focus peaking (0 12)
G
Grid type (0 18)
H
High-speed frame capture + (0 9) Hi-Res Zoom (0 10)

P
Picture Controls (0 22)

R
Record camera orientation (0 11)

S
Self-timer (0 17)

U
USB (0 33)

W
Wi-Fi access point mode (0 24) Wi-Fi station mode (0 24)
48

Indeks

Dilarang memperbanyak dokumen ini dalam bentuk apa pun, seluruhnya atau sebagian (kecuali kutipan singkat dalam artikel kritis atau reviews), dapat dibuat tanpa izin tertulis dari NIKON CORPORATION.
SB5J03(11) 6MO13811-03

Dokumen / Sumber Daya

Nikon Zf Reference Guide [Bahasa Indonesia:] Panduan Pengguna
Zf Reference Guide, Zf, Reference Guide

Referensi

Panduan Pengguna

Nikon Zf Reference Guide

Spesifikasi Produk

Petunjuk Penggunaan Produk

Kontrol

Dokumen / Sumber Daya

Referensi

Tinggalkan komentar

Batalkan balasan