Logo NODESTREAM

Dekoder Pengaktifan Operasi Jarak Jauh NODESTREAM FLEX

NODESTREAM-FLEX-Remote-Operations-Enablement-Decoder-product

Silakan baca petunjuk ini dengan seksama sebelum menggunakan produk ini

Informasi untuk keamanan Anda
Perangkat hanya boleh diservis dan dirawat oleh petugas servis yang berkompeten. Pekerjaan perbaikan yang tidak tepat bisa berbahaya. Jangan mencoba menyervis produk ini sendiri. TampMenggunakan perangkat ini dapat mengakibatkan cedera, kebakaran, atau sengatan listrik, dan akan membatalkan garansi Anda.

Pastikan untuk menggunakan sumber daya yang ditentukan untuk perangkat. Sambungan ke sumber listrik yang tidak tepat dapat menyebabkan kebakaran atau sengatan listrik.

Keselamatan Operasional

Sebelum menggunakan produk, pastikan semua kabel tidak rusak dan tersambung dengan benar. Jika Anda melihat ada kerusakan, segera hubungi tim dukungan.

  • Untuk menghindari korsleting, jauhkan benda logam atau statis dari perangkat.
  • Hindari debu, kelembapan, dan suhu yang ekstrem. Jangan letakkan produk di tempat yang dapat menjadi basah.
  • Suhu dan kelembaban lingkungan operasi:
    • Suhu:
    • Pengoperasian: 0 ° C hingga 35 ° C
    • Storage: 0°C to 65°
    • Kelembaban (tidak mengembun):
    • Operasional: 0% hingga 90%
    • Penyimpanan: 0% sampai 90%
  • Cabut perangkat dari stopkontak sebelum membersihkan. Jangan gunakan pembersih cair atau aerosol.
  • Hubungi tim dukungan support@harvest-tech.com.au jika Anda mengalami masalah teknis dengan produk.

Simbol

NODESTREAM-FLEX-Remote-Operations-Enablement-Decoder-fig- (1)

  • Kontak dan Dukungan support@harvest-tech.com.au
  • Panen Teknologi Pty Ltd
    7 Turner Avenue, Technology Park Bentley, WA 6102, Australia harvest. technology

NODESTREAM-FLEX-Remote-Operations-Enablement-Decoder-fig- (2)

Penafian dan Hak Cipta

Sementara Harvest Technology akan berusaha untuk menjaga agar informasi dalam panduan pengguna ini tetap mutakhir, Harvest Technology tidak membuat pernyataan atau jaminan apapun, tersurat maupun tersirat tentang kelengkapan, akurasi, keandalan, kesesuaian atau ketersediaan sehubungan dengan panduan pengguna atau informasi, produk, layanan, atau gambar terkait yang terkandung dalam panduan pengguna, websitus atau media lainnya untuk tujuan apa pun.

The information contained in this document is believed to be accurate at the time of release, however, Harvest Technology cannot assume responsibility for any consequences resulting from the use thereof.

Harvest Technology berhak membuat perubahan pada produknya dan dokumentasi terkait kapan saja tanpa pemberitahuan. Harvest Technology tidak memikul tanggung jawab atau kewajiban apa pun yang timbul dari penerapan atau penggunaan salah satu produknya atau dokumentasi terkait.

Any decisions you make after reading the user guide or other material are your responsibility and Harvest Technology cannot be held liable for anything you choose to do.

Oleh karena itu, ketergantungan apa pun yang Anda berikan pada materi tersebut sepenuhnya merupakan risiko Anda sendiri.

Harvest Technology products, including all hardware, software and associated documentation, are subject to international copyright laws. The purchase of, or use of this product, conveys a license under any patent rights, copyrights, trademark rights, or any other intellectual property rights from Harvest Technology.

Jaminan

Pernyataan Kepatuhan FCC

CATATAN: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the user manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at their own expense.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. To maintain compliance with compliance regulations, shielded HDMI cables must be used with this equipment

Pernyataan Kepatuhan CE/UKCA

Penandaan dengan simbol (CE) dan (UKCA) menunjukkan kesesuaian perangkat ini dengan arahan yang berlaku dari Komunitas Eropa dan memenuhi atau melampaui standar teknis berikut.

  • Directive 2014/30/EU – Kompatibilitas Elektromagnetik
  • Directive 2011/65/EU – RoHS, pembatasan penggunaan zat berbahaya tertentu dalam peralatan listrik dan elektronik

Peringatan: Pengoperasian peralatan ini tidak ditujukan untuk lingkungan perumahan dan dapat menyebabkan interferensi radio.

Memulai

Perkenalan

The Nodestream Flex can facilitate any customer’s Encode or Decode requirement with its comprehensive input, output, and mounting options. The Video Wall functionality enables output of all your Nodestream X streams on individual displays with the flexibility to direct what you want, where you wantt, with ease. Surface, VESA 100, and rack mounting options are available with up to 3 x devices mounted to a single 1.5RU shelf, saving precious rack space.

Fitur Utama

Umum

  • Desain kompak tanpa kipas
  • Surface, VESA, or Rackmount options
  • Volume masukan lebartagjangkauan e, konsumsi daya rendah
  • Streaming HD bandwidth rendah dan latensi rendah hingga 16 saluran video dari 8Kbps hingga 5Mbps
  • Multiple input types – 4 x HDMI, US,,B and network streams

Nodestream X

  • Operasi Encoder atau Decoder
  • 5 x HDMI outputs with Video Wall function
  • Hingga 16 x aliran video simultan
  • Saluran audio Nodecom
  • Hingga 11 x aliran data
  • Forward decoded video streams to Nodestream Live Nodestream Live
  • Hingga 16 x aliran video simultan

Setup Khas

Nodestream X

NODESTREAM-FLEX-Remote-Operations-Enablement-Decoder-fig- (3)

Nodestream Langsung

NODESTREAM-FLEX-Remote-Operations-Enablement-Decoder-fig- (4)

Koneksi

NODESTREAM-FLEX-Remote-Operations-Enablement-Decoder-fig- (5)

Tombol reset

  • Reset – Press 2 sec & release Factory Reset – Press & hold

LED Status
LED RGB untuk menunjukkan status sistem

LED Status

  • LED RGB untuk menunjukkan status sistem
  • Sistem BIRU mulai
  • GREEN Solid (streaming), Flashing (idle)
  • Masalah Jaringan MERAH

Eternet
2 x Gigabit RJ45

USB
2 x Type A – Connection of peripherals

Suara Analog
Peluru TRRS 3.5 mm

Masukan HDMI x4
Connection to HDMI video sources

Video Wall HDMI Output x 4
Configurable display outputs (Decoder mode only)

Seri RS232
3.5mm TRRS – /dev/ttyTHS0

Passthrough HDMI Output
Passive display output

Sakelar Daya
Saklar hidup/mati

Masukan Daya 
Tegangan 12-28VDC

NODESTREAM-FLEX-Remote-Operations-Enablement-Decoder-fig- (6)

Redundansi Daya

For critical operations, an optional Y split power cable can be supplied to enable the connection of 2 independent power supplies, providing power redundancy. If 1 of the power supplies fails, the other will continue to power the device without interruption to service.

NODESTREAM-FLEX-Remote-Operations-Enablement-Decoder-fig- (7)

  • Nodestream devices are supplied with a Quick Start Guide for installation and detailed UI functions.
  • Scan the User Resources QR code on the last page for access
  • The device will boot automatically when power is applied

Menampilkan Output

Passthrough “KELUAR”
This HDMI output displays the uncut/unscaled output from the device. This output should be used for;

  • Encoder modes (Video Wall outputs are disabled in Encoder modes)
  • Initial device configuration
  • Where a single display is connected in Decoder mode
  • Ke view atau merekam seluruh aliran yang didekodekan dalam mode Dekoder

Dinding Video

  • When in Nodestream X Decoder mode, the Video Wall function of your Flex device enables output to up to 5 displays (4 x Video Wall + 1 x Passthrough). This allows users flexibility to view salah satu atau semua dari 4 input dari Encoder yang terhubung ke masing-masing layar. Ketika Encoder yang terhubung hanya mengalirkan 1 input, input yang dipilih akan ditampilkan di semua output.

NODESTREAM-FLEX-Remote-Operations-Enablement-Decoder-fig- (8)

  • Control of the Video Wall is performed via your Harvest Control Application.
  • For specifications of display outputs, refer to “Technical Specifications” on page 19

Konfigurasi

Lebihview

Itu Web Interface provides details and management of;

  • Informasi versi perangkat lunak
  • Jaringan
  • Kredensial login pengguna
  • Dukungan jarak jauh
  • Mode sistem
  • Pengaturan server
  • Pembaruan

Mengakses
Itu Web Interface can be accessed locally on your device or through a web browser on a PC connected to the same network.

  • Web Antarmuka tidak tersedia sampai perangkat lunak Nodestream dimulai

Akses Lokal

  1. Connect your device to your LAN, monitor, keyboard/mouse, and power it up.
  2. Wait for the software to start, and press Alt+F11n on your keyboard or right click and select configuration.
  3. Saat diminta, masukkan detail login Anda.
    • Nama pengguna default = admin
    • Kata sandi bawaan = admin

NODESTREAM-FLEX-Remote-Operations-Enablement-Decoder-fig- (9) NODESTREAM-FLEX-Remote-Operations-Enablement-Decoder-fig- (10)

Web Mengakses
Hubungkan komputer ke jaringan yang sama dengan perangkat Anda atau langsung melalui kabel Ethernet.

NODESTREAM-FLEX-Remote-Operations-Enablement-Decoder-fig- (11)

DHCP-Enabled Network

  1. Hubungkan perangkat Anda ke LAN dan nyalakan.
  2. Dari web browser komputer yang terhubung ke jaringan yang sama, masukkan alamat IP perangkat atau http://serialnumber.loca, e.g, http://au2518nsfx1a014.local..
  3. Saat diminta, masukkan detail login Anda.

The serial number can be found on the product label, affixed to the side of your device..

Jaringan Non-DHCP
If your device is connected to a non-DHCP-enabled network, and its network has not been configured, it will fall back to a default IP address of 192.168.100.101.

  1. Hubungkan perangkat Anda ke LAN dan nyalakan.
  2. Konfigurasikan pengaturan IP komputer yang terhubung ke jaringan yang sama ke:
    • IP 192.168.100.102
    • Subjaringan 255.255.255.252
    • Gerbang 192.168.100.100
  3. Dari sebuah web browser, masukkan 192.168.100.101 di bilah alamat.
  4. Saat diminta, masukkan detail login Anda.

When configuring multiple devices on a non-DHCP-enabled network, due to IP conflicts, only 1 device can be configured at a time. Once a device has been configured, it may be left connected to your network.  ork

Konfigurasi Awal

  • Nodestream devices require the following to be configured before operation;
    • Jaringan(s) lihat di bawah ini
    • System refers to “System Mode” on page 11
    • Server(s) ref Server Configuration” on page 11

The primary network of your Nodestream device must be configured to ensure a stable connection and prevent the device from setting its IP address to its static default. Log in to the Web Antarmuka.

  1. Setelah masuk, Anda akan melihat perintah berwarna oranye untuk mengkonfigurasi antarmuka UTAMA.NODESTREAM-FLEX-Remote-Operations-Enablement-Decoder-fig- (12)
  2. If connected to a toDHCP-enabled network, save in the “Port” window. Refer to “Port Configuration” on page 8 for configuration of static IP settings.

Jaringan

NODESTREAM-FLEX-Remote-Operations-Enablement-Decoder-fig- (13)

Informasi
Displays information related to the selected port (select from the drop-down in the “Port” section)

  • Nama Nama pelabuhan
  • Status Koneksi status port
  • Configured Shows if the port has been configured, whether DHCP is enabled or disabled
  • Alamat IP
  • Subjaringan
  • Gerbang Gerbang
  • M::TU Set maximum transmission unit
  • Alamat MAC Adaptor Alamat MAC
  • Menerima Throughput “penerimaan” Langsung
  • Mengirim throughput “pengiriman” Langsung

NODESTREAM-FLEX-Remote-Operations-Enablement-Decoder-fig- (14)

Pengujian

Bahasa Indonesia: Ping
For testing connection to your Nodestream X server or other devices on your network, i.e,. IP cameras. NODESTREAM-FLEX-Remote-Operations-Enablement-Decoder-fig- (15)

  1. Enter the  IP address to ping..
  2. Click the  Ping button. The notification will display, followed by either.
    • Waktu ping dalam ms berhasil
    • Could not reach the addresses.l

Jaringan Nodestream X
This tool provides a means to test if all network requirements are in place to allow your device to function correctly when operating in Nodestream X modes. The following tests are performed on your Nodestream Server.

  1. Uji ping ke server
  2. Uji port TCP
  3. Uji STUN TCP
  4. Uji port UDP
  • Nodestream X Server configuration required, refer to  “Server Configuration” on page 11
  • Nodestream devices require Firewall rules to be in place. Refer to “Firewall Settings” on page 9

Konfigurasi Port

Eternet
Select the port you’d like to configure from the “Port ” dropdown.

Bahasa Indonesia: DHCP

  1. Select “DHCP” from the “IPv4” drop-down if not already selected, then save.
  2. When prompted, confirm the IP settings change.

Buku petunjuk

  1. Select “Manual” from the “IPv4” drop-down.
  2. Masukkan rincian jaringan seperti yang diberikan oleh Administrator Jaringan Anda, lalu klik simpan.
  3. When prompted, confirm the IP settings change.
  4. Untuk masuk kembali ke Web Antarmuka, masukkan alamat IP baru atau http://serialnumber.local di dalam kamu web peramban.

NODESTREAM-FLEX-Remote-Operations-Enablement-Decoder-fig- (16)

Akses Internet Nirkabel
WiFi hanya tersedia jika adaptor WiFi USB opsional terpasang. Adaptor WiFi yang kompatibel dan terverifikasi:

  • TP-Link T2U v3
  • TP-Link T3U
  • TP-Link T4U
    1. Select “WiFi” from the “Port dropdown.
    2. Select a t network from the list of available networks from the “Visible Network ” drop-down.
    3. Select the security type and enter the password.
    4. Click save for DHCP or select “Manual”, enter port details as provided by your Network Administrator, and then click save.

Memutuskan

  1. Select WiFi from the “Port” drop-down.
  2. Klik tombol "Putuskan Sambungan".
    • Hanya jaringan IPv4 yang didukung
    • LAN 1 MUST be used for Nodestream traffic. LAN 2 is used for connecting to a separate network stream input. If a non-default MTU is set for a port, you MUST re-enter the value when changing port settings for the value to be retained.

NODESTREAM-FLEX-Remote-Operations-Enablement-Decoder-fig- (17)

Pengaturan Firewall

Merupakan hal yang umum bagi firewall/gateway/perangkat lunak anti-virus jaringan perusahaan untuk memiliki aturan ketat yang mungkin memerlukan modifikasi untuk memungkinkan perangkat Nodestream berfungsi.

Nodestream X devices communicate with the server and each other via TCP/UDP ports; therefore, the following permanent network rules for all inbound & outbound traffic must be in place:

Pelabuhan

  • TCP 8180, 8230, 45000, 55443 & 55555
  • UDP 13810, 40000 & 45000 – 45200
  • Server access to the  IP address

Izinkan lalu lintas ke/dari (daftar putih);

Penemuan

NODESTREAM-FLEX-Remote-Operations-Enablement-Decoder-fig- (18)

Akses Perangkat Nodestream
Nodestream devices connected to the same network as your device will display. ClickNODESTREAM-FLEX-Remote-Operations-Enablement-Decoder-fig- (19) the icon next to the Device IP to open its Web Antarmuka di jendela baru.

Salin Detail Server Nodestream X
Untuk menyalin rincian server Nodestream X dari perangkat lain;

  1. Klik tombol NODESTREAM-FLEX-Remote-Operations-Enablement-Decoder-fig- (20)icon of the device server details you’d like to copy
  2. Konfirmasikan tindakannya
  3. Nodestream X software will restart and connect to the new server

Akses Server Nodestream X
Untuk mengakses server Nodestream X web antarmuka, klik NODESTREAM-FLEX-Remote-Operations-Enablement-Decoder-fig- (19)the icon next to the Nodestream X Server IP.

 

NODESTREAM-FLEX-Remote-Operations-Enablement-Decoder-fig- (21)

Sistem

NODESTREAM-FLEX-Remote-Operations-Enablement-Decoder-fig- (22)

Aplikasi
Menampilkan informasi yang berkaitan dengan proses perangkat lunak dan penggunaan sumber dayanya. Ini dapat berguna dalam mendiagnosis masalah perangkat lunak dan/atau kinerja.

Atur Ulang dan Dukungan

  • Reset Jaringan Mengatur ulang semua pengaturan jaringan ke default.
  • Reset Perangkat Mengatur ulang semua pengaturan aplikasi dan server ke default
  • Factory Reset Resets ALL device settings to default (alternatively, hold “ctrl+alt” and press “r” on a connected keyboard, or use the reset button, see below, to factory reset your device

NODESTREAM-FLEX-Remote-Operations-Enablement-Decoder-fig- (23)

Remote support is enabled by default.t

Perbarui Kata Sandi
Memungkinkan Anda untuk mengubah Web Interface login password. If the password is unknown, perform a factory reset. Refer to “Reset and Support” above.

Mode Sistem
Your Nodestream device can operate as either;

  • Pengkode Nodestream X
  • Dekoder Nodestream X
  • Pengkode Langsung Nodestream
  • Active mode is highlighted in RED. To change mo,  click the applicable button.

NODESTREAM-FLEX-Remote-Operations-Enablement-Decoder-fig- (24)

Konfigurasi Server
All Nodestream devices require configuration on a server for connection and settings management.

Masukkan “kode cepat” atau ID Server dan Kunci yang diberikan oleh Administrator Nodestream Anda, lalu klik “Terapkan”.

Setelah perangkat didaftarkan ke server, Administrator Nodestream Anda perlu menambahkan perangkat tersebut ke grup di dalam server sebelum dapat digunakan.

NODESTREAM-FLEX-Remote-Operations-Enablement-Decoder-fig- (25)

Saat beroperasi dalam mode Dekoder Nodestream X, aliran yang telah didekode dapat diteruskan ke Nodestream Live. Hal ini memerlukan registrasi perangkat Anda ke server Live.

To register your device in your Nodestream Live web portal and add a new device. When prompted, enter the 6-digit code shown in your device Web Halaman sistem antarmuka atau desktop perangkat (perangkat harus dalam mode Nodestream Live Encoder atau Nodestream X Decoder).

NODESTREAM-FLEX-Remote-Operations-Enablement-Decoder-fig- (26)

Pembaruan

Pembaruan Otomatis
Automatic updates are disabled by default. Enabling this feature allows the device to download and install software when a newer version is available. During this process, the device may restart. If this is not desired, set to “No”.

Pembaruan Manual
Saat pembaruan tersedia untuk perangkat Anda, ikon akan ditampilkan di sebelah tab “Pembaruan”.

Untuk Menginstal pembaruan yang tersedia:

  1. Buka bagian Pembaruan dari Web Antarmuka.
  2. Pilih “Perbarui (instalasi permanen)” dan terima ketentuan saat diminta.
  3. Manajer yang diperbarui akan melanjutkan untuk mengunduh dan menginstal pembaruan.
  4. Once the update process is complete,, your device or the software may restart.

 

NODESTREAM-FLEX-Remote-Operations-Enablement-Decoder-fig- (27)

NODESTREAM-FLEX-Remote-Operations-Enablement-Decoder-fig- (28)

Pembaruan diinstal secara bertahap. Ketika pembaruan manual telah selesai, terus segarkan pengelola pembaruan dan instal pembaruan hingga perangkat Anda diperbarui.

Operasi Nodestream X

Lebihview
Nodestream X is a point-to-point video, audio, and data streaming solution with ultimate control, allowing customers to meet operational requirements. A basic system comprises;

  • Encoder Ingest and encode video/data/audio
    Decoder Display/output decoded streams
  • Control Application:: Manage connections and settings
  • Services manage device groups, users, licensing, and communicate control messages

Hamparan
Saat beroperasi dalam mode Nodestream X, dan sistem dalam mode siaga (bukan streaming video), sebuah overlay akan menampilkan informasi sistem. Hal ini memungkinkan pengguna untuk view the current system status and assists with diagnosing system issues.

NODESTREAM-FLEX-Remote-Operations-Enablement-Decoder-fig- (29)

  1. Mode Video / Versi Perangkat Lunak
    Mode video saat ini – Encoder atau Decoder dan versi perangkat lunak Nodestream terpasang.
  2. Serial Perangkat
    Nomor seri perangkat.
  3. Server IP
    Alamat IP server Nodestream Anda.
  4. Status Jaringan
    Displays the current status of network ports:
    1. IP address shown down (unplugged), not configured
  5. Status Koneksi Server
    Waiting for Nodestream connection. Connecting to Nodestream serv.er Server connection error
  6. Frame Rate, Resolusi & Bit-rate
    Kecepatan bingkai dan resolusi video yang akan dialirkan ke Dekoder (hanya mode Encoder), serta kecepatan bit transmisi dan penerimaan saat ini.
    • Jaringan terhubung dan dikonfigurasi.
    • Network not connected to the device.
    • Network not configured – refer to “Port Configuration” on page 8
    • Connected to the server, ready to connect to another device. Connecting to the server.
    • There is a network issue preventing connection to the server. Refer to “Troubleshooting” on page 20

If the overlay is not displayed, it may be disabled. Enable it via your Harvest Control Application.

Video

Pengkodean
Saat perangkat Anda beroperasi dalam mode Encoder, input dapat viewDitampilkan pada monitor yang terhubung. Input yang dipilih melalui aplikasi Harvest Control Anda akan ditampilkan. Ini berguna untuk mendiagnosis masalah pada input video streaming perangkat keras dan/atau jaringan.

Video yang ditampilkan merupakan refleksi langsung dari apa yang akan dikirim ke Dekoder yang terhubung. Perubahan pada frame rate dan resolusi akan terlihat.

Input Perangkat Keras
Compatible sources connected to the device via HDMI or USB 3.0 can be selected as inputs within your Harvest control application. For a detailed list of supported input types, refer to “Technical Specifications” on page 19.

NODESTREAM-FLEX-Remote-Operations-Enablement-Decoder-fig- (30)

Due to copyright restrictions, HDCP (High-bandwidth Digital Content Protection) signals, such as those from DVD players and media streamers, cannot be captured.

Sumber Uji
Sumber video uji terpasang di perangkat Anda untuk digunakan sebagai masukan guna membantu pemecahan masalah atau pengaturan awal. Sumber ini dapat dipilih melalui aplikasi kontrol Harvest Anda.

  • Sumber Uji Putaran video uji
  • Test Patte:  rn Simple low bandwidth loop
  • Colour Bars Colour bars with a white noise section for testing colour and high bandwidth

Mode Profesional

  • Enable Pro Mode via your Harvest Control Application to activate the following features:
  • Video 4K60 (4x1080/60)
  • Data Sinkron Bingkai
  • Input data UDP pada port 40000 dialirkan secara sinkron frame dengan video yang menyertainya. Output ini dapat dikirimkan ke hingga 4 perangkat jaringan dari Dekoder Nodestream X Anda yang terhubung.
    • Pro Mode can only be activated when hours are available on your account. To purchase hours, contact sales@harvest-tech.com.au.
    • When hours have been depleted, all Pro MMode-enabled streams will fall back to 1080/60.

Sumber Jaringan
Sumber jaringan yang tersedia di jaringan yang sama dengan perangkat Anda, seperti sumber dari kamera IP, dapat didekode dan digunakan sebagai input. Input ditambahkan dan dikelola melalui aplikasi kontrol Harvest.

Bahasa Inggris RTSP
Protokol Streaming Real-Time (RTS) biasanya digunakan untuk streaming kamera IP. Protokol ini unik untuk setiap produsen kamera dan dapat berbeda antar model. URI sumber harus diketahui sebelum dapat digunakan sebagai input. Jika autentikasi diaktifkan pada perangkat sumber, nama pengguna dan kata sandi harus diketahui dan dicantumkan dalam alamat URI.

RTP
Real-Time Transport Protocol (RTP) adalah protokol jaringan untuk mengirimkan audio dan video melalui jaringan IP. RTP biasanya berjalan melalui User DatagProtokol UDP (Radio-Radio Protocol). RTP berbeda dari RTSP karena sumber RTP perlu mengetahui alamat IP penerima terlebih dahulu, karena ia akan mengirimkan aliran video ke IP yang ditentukan.

Bahasa Indonesia: HTTP

  • HTTP streaming comes in several formats: Direct HTTP, HLS, and HTTP DASH. Currently,, only Direct HTTP is supported by Nodestre, but it is not recommended.
  • Example URI http://192.168.1.56:8080

Multisiaran

  • Multicast is a one-to-one or many-to-one connection between multiple Decoders and the source. Connected routes must be multicast-enabled. The range of IP addresses reserved for multicast is 224.0.0.0 – 239.255.255.255. Multicast streaming can be delivered via RTP or UDP.
  • URI udp://[IP Multicast]:[Port]
  • Example URI udp://239.5.5.5:5000

Bahasa Indonesia: UDP

Video data can also be transmitted and received over plain UDP. It acts similarly to RTP, where the video source will push data to the receiver, requiring in advance to know the destination before streaming can occur. Generally,  it’s preferable to use RTP instead of plain UDP if the user has the choice due to inbuilt mechanisms like jitter compensation in RTP.

Kontrol PTZ

  • Your Nodestream device can control network PTZ cameras via the Windows Harvest Control Application.
  • Cameras must be ONVIF-compliant, enabled, and configured with the exact security credentials of the associate.

Aliran RTSP.
Your Nodestream device can control network PTZ cameras via the Windows Harvest Control Application.  Cameras must be ONVIF compliant, enabled, and configured with the exact security credentials associated with the TSPP stream.

  • Atur resolusi sumber ke 1080 dan frame rate ke 25/30 untuk performa terbaik.
  • Gunakan alat ping di Web Interface and/or software such as VLC from a PC connected to the network to est/confirm network stream IP’s and URL'S.
  • Direct cameras away from dynamic references where practical, i.e., water, trees. Reducing image pixel changes will decrease bandwidth requirements.

Penguraian kode
When your device is operating in Nodestream X Decoder mode, nd connected to an Encoder, up to 4 video streams will be displayed on connected monitor(s). Refeto r “Display Outputs” on page 3

NODESTREAM-FLEX-Remote-Operations-Enablement-Decoder-fig- (31)

Keluaran RTP
Perangkat Anda dapat dikonfigurasi untuk mengeluarkan aliran video yang didekodekan dalam format RTP untuk viewing on another device within the connected network or integration into a 3rd party system, i.e., NVR.

  1. Konfigurasi Perangkat (melalui aplikasi kontrol Harvest Anda)
    • Pilih perangkat Anda dan navigasikan ke pengaturan videonya
    • Masukkan IP tujuan dan tetapkan port untuk output yang ingin Anda gunakan, hingga 4.
  2. View Aliran (di bawah ini ada 2 contohamples; other methods not listed may be suitable)
    • SDP File
    • Konfigurasikan SDP file menggunakan editor teks dengan yang berikut ini.
    • c=DI IP4 127.0.0.1
    • m=video 56000 RTP/AVP 96
    • a=rtpmap:96 H264/90000
    • a=fmtp:96 media=video; laju-jam=90000; nama-pengodean=H264;
    • G-Streamer adalah alat streaming video yang digunakan untuk merekam video.
      Run the following command from your terminal program. The GStreamer program must be installed.
      gst-launch-1.0 udpsrc port=56000 caps=”application/x-rtp, media=video, clock-rate=90000, encoding-name=H264, payload=96″ ! rtph264depay ! decodebin! videoconvert  autovideosink
    • Nomor port, ditunjukkan dengan warna merah, harus sama dengan output RTP yang ingin Anda kirim. view
    • Output terkait langsung dengan input encoder yang terhubung dengan perangkat Anda.
    • Port yang disarankan untuk digunakan adalah 56000, 56010, 56020 & 56030

Modul Langsung Nodestream
This feature allows sharing of your Nodestream X stream with external parties via Nodestream Live. Simply add your device to your Nodestream Live organisation,  nd it will be available to share via a timed link or viewed by organisation members. For information on how to add your device, refer to “Server Configuration” on page 11.

  • Requires an account and subscription to Nodestream Live
  • Stream settings are controlled by the Nodestream X user. The Live stream is a “slaved” view.
  • When your device is not connected to an Encoder, the system idle screen will be displayed in Live..

Suara
Nodestream video devices include a single Nodecom audio channel for streaming two-way audio to other Nodestream devices in your group. The following audio devices are supported:

  • USB speakerphone, headset, or capture device via the USB A accessory port
  • Keluaran HDMI
  • Perangkat audio dipilih dan dikonfigurasikan melalui aplikasi kontrol Harvest Anda.

Data
Up to 10 channels of serial, TCP, or UDP data can be simultaneously streamed between connected devices. This versatile function enables: Transmission of telemetry/sensor data to/from remote sites.

  • Control of remote systems
  • Kemampuan untuk mengakses perangkat jarak jauh web interfaces, e.g., IP camera, IOT device.
  • Lewatkan data dari Dekoder Nodestream Anda ke perangkat pihak ketiga dan/atau perangkat jaringan lokal.

NODESTREAM-FLEX-Remote-Operations-Enablement-Decoder-fig- (32)

  • Saluran data dihubungkan dan dikonfigurasikan melalui aplikasi kontrol Harvest Anda.
  • Data yang dialirkan tidak boleh diandalkan untuk aplikasi kontrol yang kritis.
  • Data can also be streamed in Pro Mode. Refer to “Pro Mode” on page 14

Aplikasi Kontrol

  • Koneksi perangkat dan konfigurasi input/output terkait dikelola melalui aplikasi kontrol Harvest. Nodester
  • A control-only iOS application developed for iPad. Typically used in control applications or when a customer’s Nodestream group comprises only hardware devices.
  • Nodestream untuk Windows
  • Aplikasi dekoder, audio, dan kontrol Windows Nodestream.
  • Nodestream untuk iOS & Android
  • Aplikasi dekoder, encoder, audio, dan kontrol Nodestream untuk iOS dan Android.
  • Operasi Langsung Nodestream

Lebihview

  • Nodestream Live is a point-to-cloud video and audio streaming solution that facilitates viewmenghubungkan hingga 16 saluran video (per perangkat) ke perangkat apa pun web-enabled device connected to the Internet. A basic system comprises;
    • Encoder Menyisipkan dan Mengkodekan video/audio
    • Server managesdevicess, inputs, organisations, and users

Input Encoder

Perangkat keras
Sumber video HDMI dan/atau USB yang terhubung ke perangkat Anda dapat dipilih sebagai input melalui pengaturan perangkat di Nodestream Live Anda web portal. For a detailed list of tosupported types, refertoe “Technical Specifications” on page 19.

Jaringan
Network sources, such as IP cameras, available on the network(s) your device is connected to,,nareused as inputs. Network inputs are configured via the “Inputs” page within your Nodestream Live portal. A device must be in the same oorganization to be available for selection on the device settings page. For more information, refer to ” toNetwork Sources” on page 15

  • The number of network streams possible, before quality is affected, depends on the source resolution and frame rate. For 16 x sources, the theggested resolution is 1080 and frame rate 25; higher resolutions will affect performance.

Suara
Where audio is enabled on a configured RTSP source, the Nodestream Live Encoder will automatically detect and stream it to your web portal. Audio streams can be muted/unmutedviviahe portal.

Lampiran

Spesifikasi Teknis

NODESTREAM-FLEX-Remote-Operations-Enablement-Decoder-fig- (33)

Penyelesaian Masalah

Sistem

NODESTREAM-FLEX-Remote-Operations-Enablement-Decoder-fig- (34)

Jaringan

NODESTREAM-FLEX-Remote-Operations-Enablement-Decoder-fig- (35)

Video

NODESTREAM-FLEX-Remote-Operations-Enablement-Decoder-fig- (36)

Suara

NODESTREAM-FLEX-Remote-Operations-Enablement-Decoder-fig- (37)

Kontak dan Dukungan support@harvest-tech.com.au

NODESTREAM-FLEX-Remote-Operations-Enablement-Decoder-fig- (38)

Panen Teknologi Pty Ltd

  • 7 Turner Ave, Taman Teknologi
  • Bentley W,  A 6102, Australia
  • panen.teknologi
  • All rights reserved. This document is the property of Harvest Technology Pty Ltd. No part of this publication may be reproduced, stored in a retrieval systemor   ransmitted in any form or by any means, electronic, photocopy,  recording, or otherwise, without the written consent of the CEO of Harvest Technology Pty Ltd.

Tanya Jawab Umum

T: Dapatkah saya menyervis produk sendiri?

A: No, it is recommended to only have qualified service personnel service the product to avoid any potential dangers.

T: Di mana saya dapat menemukan informasi garansi?

A: The warranty information can be found online at the following link: Warranty Information

Dokumen / Sumber Daya

Dekoder Pengaktifan Operasi Jarak Jauh NODESTREAM FLEX [Bahasa Indonesia:] Panduan Pengguna
FLEX, Dekoder Pengaktifan Operasi Jarak Jauh FLEX, Dekoder Pengaktifan Operasi Jarak Jauh, Dekoder Pengaktifan

Referensi

Tinggalkan komentar

Alamat email Anda tidak akan dipublikasikan. Bidang yang wajib diisi ditandai *